BenQ Projector SU917 User Manual

Operation 51
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
1. 
DISPLAYWall ColorOff/Light Yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
2D Keystone
Corner Fit
Po s i t i o n
Phase
H. Size
Digital Zoom
3D3D modeAuto/Top Bottom/Frame 
Sequential/Frame Packing/Side 
by Side/Off
3D Sync Invert Disable/Invert
Save 3D 
Settings
Apply 3D 
Settings
Teaching...

Operation
522. 
PICTUREPicture ModeDynamic/Presentation/sRGB/Cinema/(3D)/
User 1/User 2
Reference 
ModeDynamic/Presentation/sRGB/Cinema/(3D)
Brightness
Contrast
Color
Tint
Sharpness
Color 
Te m p e r a t u r eCool/Normal/Warm
Color 
Temperature 
Fine TuningR Gain/G Gain/B Gain/R Offset/
G Offset/B Offset
3D Color 
ManagementPrimary Color R/G/B/C/M/Y
Hue
Saturation
Gain
Reset Picture 
SettingsCurrent/All/
Cancel
3. SOURCEQuick Auto Search On/Off
Color Space Conversion Auto/RGB/YUV 

Operation 53 4. 
SYSTEM 
SETUP: 
BasicPresentation 
TimerTimer Period1~240 minutes
Timer DisplayAlways/1 min/2 min/3 min/
Never
Timer PositionTop-Left/Bottom-Left/Top-
Right/Bottom-Right
Timer Counting 
DirectionCount Down/Count Up
Sound 
ReminderOn/Off
On/Off Yes/No
Language
Projector 
InstallationFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Menu SettingsMenu Display 
Time5 secs/10 secs/20 secs/30 secs/
Always
Menu PositionCenter/Top-Left/Top-Right/
Bottom-Right/Bottom-Left
Reminder 
MessageOn/Off 

Operation
544. 
SYSTEM 
SETUP: 
BasicOperation 
SettingsDirect Power 
OnOn/Off
Signal Power 
OnOn/Off
Auto Power OffDisable/3 min/10 min/15 min/20 
min/25 min/30 min
Quick CoolingOn/Off
Instant RestartOn/Off
Blank TimerDisable/5 min/10 min/15 min/
20 min/25 min/30 min
Sleep TimerDisable/30 min/1 hr/2 hrs/3 
hrs/4 hrs/8 hrs/12 hrs
Remote 
ReceiverFront+Rear/Front/Rear
Panel Key 
LockOn/OffYe s /No
Background 
ColorBenQ/Black/Blue/Purple
Splash Screen BenQ/Black/Blue 

Operation 55 5. 
SYSTEM 
SETUP: 
AdvancedHigh Altitude 
ModeOn/OffYe s /No
Audio SettingsMuteOn/Off
Volume0~10
Microphone 
Volume0~10
Power On/Off 
Ring ToneOn/Off
Lamp SettingsLamp ModeNormal/Economic/SmartEco
Reset lamp 
timerYes/No
Lamp 
InformationLamp Usage Time
Normal
Economic
SmartEco
Equivalent Lamp Hour
Security 
SettingsChange Password
Change 
Security
Power On LockOn/Off
Web Control 
LockOn/Off
Baud Rate2400/4800/9600/19200/38400/
57600/115200
Te s t  P a t t e r nOn/Off
Closed 
CaptionClosed...

Operation
56Note that the menu items are available when the projector detects at least one valid 
signal. If there is no equipment connected to the projector or no signal detected, 
limited menu items are accessible. 5. 
SYSTEM 
SETUP: 
AdvancedNetwork 
SettingsWired LANStatus
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Wireless LANStatus
SSID
SSID Display
IP Address
Connection Mode
Apply
Remote 
DesktopAccount
Password
Connect
Projection 
Login CodeOn/Off
BroadcastingBroadcasting...

Operation 57
Description of each menu
• The default values listed in this manual, especially on pages 57-66, are 
for reference only. They may vary between the projectors due to the 
continuous improvement to the  products.
FUNCTIONDESCRIPTION
Wall ColorCorrects the projected picture’s color when the projection 
surface is not white. See Using Wall Color on page 41 for 
details.
Aspect RatioThere are four options to set the images aspect ratio depending 
on your input signal source. See Selecting the...

Operation
58
FUNCTIONDESCRIPTION
3DThis projector features a 3D function which enables you to enjoy 
the 3D movies, videos, and sporting events in a more realistic 
way by presenting the depth of the images. You need to wear a 
pair of 3D glasses to view the 3D images.
3D mode
The default setting is Auto and the projector automatically 
chooses an appropriate 3D format when detecting 3D contents. 
If the projector cannot recognize the 3D format, press  /  to 
choose a 3D mode.
3D Sync Invert
When you...

Operation 59
FUNCTIONDESCRIPTION
Picture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See Selecting 
a picture mode on page 40 for details.
Reference 
ModeSelects a picture mode that best suits your need for the image 
quality and further fine-tune the image based on the selections 
listed on the same page below. See Setting the User 1/User 2 
mode on page 40 for details.
This function is only available when User 1 or User 
2 is...

Operation
60
FUNCTIONDESCRIPTION
Color 
Te m p e r a t u r eSee Selecting a Color Temperature on page 42 for details.
This function is only available when User 1/2 is 
selected.
Color 
Te m p e r a t u r e  
Fine TuningSee Setting a preferred color temperature on page 42 for 
details.
3D Color 
ManagementSee 3D Color Management on page 42 for details.
This function is only available when User 1/2 is 
selected.
Reset Picture 
SettingSee Resetting current or all picture modes on page 43 for 
details.
When...