BenQ Projector PE5120 User Manual

  21
  Using the on-screen display menus *About color temperatures:
There are many different shades that are considered to be “white” for various purposes. One of the 
common methods of representing white color is known as the “color temperature”. A white color with a 
low color temperature appears to be reddish white. A white color with a high color temperature appears 
to have more blue in it.
Pro-picture menu
Some picture adjustments are available only when certain input ports are in use. Unavailable...

22 Additional information  
Additional information
Care of the projector
Your projector needs little maintenance. The only thing you have to do on a regular basis is keep the lens clean. 
Never remove any parts of the projector except the lamp. Contact your dealer if other parts needs replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface. Before you attempt to clean the lens, turn the 
projector off, unplug the power cord, and leave it several minutes to cool...

  23
  Additional information
1. Turn the power off and disconnect the projector from the wall 
socket. Turn off all connected equipment and disconnect all 
other cables.
2. After it has cooled down, turn the projector over. Then loosen 
the screws and remove the lamp cover as indicated in the picture.
3. Move the latch to another end as shown in the picture.
4. Loosen the screw that holds the lamp to the projector. If the screw 
is not loosened completely, they could injure your fingers. It is 
strongly...

24 Additional information  
Indicator lights
There are three indicator lights which show the status of the projector. Refer to the following table for description 
of indicator light operation. If they indicate that something is wrong, note the light status, turn the projector off 
and contact your dealer. 
When the projector is in a normal state ... 
When the projector is in an abnormal state ... 
Service information
Accessories 
POWER TEMP LAMP STATE REMARK
Orange
Off OffStandby mode.
Flashing...

  25
  Additional information
Optional accessories
Ordering spare parts or getting information
For product information, product assistance, service information, or to order accessories, please visit the BenQ 
Corporation website at http://www.BenQ.com
.
Troubleshooting
Power cord (Switzlerland) ................  27.01218.051 Soft carry case..................................... 47.J9904.001
Power cord (Australia)......................  27.01343.001 Remote control......................................

26 Additional information  
Specifications
All specifications are subject to change without notice. 
Dimensions 
Unit: mm
Optical characteristics
Projection systemSingle-chip DLPTM system.
DMD chip0.53” DMD 480P (854 x 480)
Lens1.22-times zoom ratio, F/# 2.4 - 2.6, f= 24.0 - 29.1 mm
Projection size31 to 300 inches
Lamp200W lamp
Electrical characteristics
Color systemNTSC / PAL-M / PAL-N / PAL 60 / SECAM
ResolutionSXGA, XGA, SVGA, VGA, Macintosh®, 
HDTV (1080i, 720p, 576p, 576i, 480p, 480i)
Max. number of...