BenQ Projector MX882UST User Manual

Operation 41
Shutting down the projector
1. Press  POWER or  OFF and a confirmation message will display prompting 
you. 
If you dont respond in a few seconds, the message will disappear.
2. Press  POWER or  OFF a second time. The POWER indicator light 
flashes orange, the projection lamp shuts down, and the fans will continue to run for 
approximately 90 seconds to cool down the projector.
To protect the lamp, the projector will not respond to any commands during the cooling process.
To shorten the...

Operation 42
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected and the projector model you are using.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light Green/Blue/
Blackboard
Aspect RatioAuto/Real/4:3/16:9/16:10
2D Keystone
Corner Fit
Surface FitHorizontal/Vertical
Position
Phase
H. Size
Digital Zoom
3D3D ModeAuto/Top Bottom/Frame Sequential/
Frame Packing/Side by Side/Off
3D Sync InvertDisable/Invert
Save...

Operation 43
Main menu Sub-menu Options
4. 
SYSTEM 
SETUP: 
Basic
Presentation 
TimerTimer Period1~240 minutes
Timer DisplayAlways/3 min/2 min/1 min/Never
Timer PositionTop-Left/Bottom-Left/Top-Right/
Bottom-Right
Timer Counting 
DirectionCount Down/Count Up
Sound ReminderOn/Off
On/Off
Language
Projector InstallationFront Table/Rear Table/
Rear Ceiling/Front Ceiling
Menu SettingsMenu Display 
Time5 sec/10 sec/20 sec/30 sec/Always
Menu PositionCenter/Top-Left/Top-Right/
Bottom-Right/Bottom-Left
Reminder...

Operation 44
 
Main menu Sub-menu Options
5. 
SYSTEM 
SETUP: 
Advanced
High Altitude ModeOn/Off
Audio 
SettingsMuteOn/Off
Volume
Power On/Off Ring 
ToneOn/Off
Lamp 
SettingsLamp ModeNormal/Economic/SmartEco
Reset Lamp Timer
Lamp Timer
Security 
SettingsChange Password
Change Security 
SettingsPower On Lock
Web Control Lock
Baud Rate2400/4800/9600/19200/38400/
57600/115200
Test PatternOn/Off
Closed 
CaptionClosed Caption EnableOn/Off
Caption VersionCC1/CC2/CC3/CC4
Standby 
SettingsNetworkEnable Network...

Operation 45 Note that the menu items are available when the projector detects at least one valid signal. 
If there is no equipment connected to the projector or no signal detected, limited menu 
items are accessible.
Main menu Sub-menu Options
5. 
SYSTEM 
SETUP: 
AdvancedNetwork 
SettingsWired LANStatus
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Wireless LANStatus
SSID
SSID Display
IP Address
Connection Mode
Apply
Remote Desktop
Projection Log In 
CodeOn/Off
Broadcasting
AMX Device...

Operation 46
Description of each menu 
Function Description
Wall ColorCorrects the projected picture’s color when the projection surface is 
not white. See Using Wall Color on page 32 for details.
Aspect RatioThere are several options to set the images aspect ratio depending on 
your input signal source. See Selecting the aspect ratio on page 29 
for details.
2D KeystoneCorrects any keystoning of the image. See Correcting keystone on 
page 22 for details.
Corner FitSee Adjusting Corner Fit on page 23 for...

Operation 47
Function Description
3D
This projector features a 3D function which enables you to enjoy the 
3D movies, videos, and sporting events in a more realistic way by 
presenting the depth of the images. You need to wear a pair of 3D 
glasses to view the 3D images.
3D Mode
The default setting is Auto and the projector automatically chooses 
an appropriate 3D format when detecting 3D contents. If the 
projector cannot recognize the 3D format, press 
/ to choose a 
3D mode. 
When the 3D function is...

Operation 48
Function Description
Picture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See Selecting a 
picture mode on page 32 for details.
Reference 
ModeSelects a picture mode that best suits your need for the image quality 
and further fine-tune the image based on the selections listed on the 
same page below. See Setting the User 1/User 2 mode on page 32 
for details.
BrightnessAdjusts the brightness of the image. See...

Operation 49
Function Description
Presentation 
TimerReminds the presenter to finish the presentation within a certain time 
frame. See Setting the presentation timer on page 35 for details.
LanguageSets the language for the On-Screen Display (OSD) menus. See Using 
the menus on page 25 for details.
Projector 
InstallationThe projector can be installed on a ceiling or behind a screen, or with 
one or more mirrors. See Using the quick install on page 14 for 
details.
Menu 
Settings
Menu Display Time
Sets...

Operation 50
Function Description
Panel Key 
LockDisables or enables all panel key functions except   POWER on the 
projector and keys on the remote control. See Locking control keys 
on page 37 for details.
Background 
ColorSets the background color for the projector.
Splash 
ScreenAllows you to select which logo screen will display during projector 
start-up. 
PointWrite 
Touch 
ModuleDisables or enables Type A connector 5V power output for 
PointWrite Touch Module.
High 
Altitude 
ModeA mode for...