BenQ Projector MX854UST User Manual

Operation51
5. 
System Setup: 
Advanced
High Altitude 
ModeOn/Off
Audio SettingsMute On/Off
Vo l u m e
Power on/off Ring On/Off
Lamp SettingsLamp Mode Normal/Economic/SmartEco
Reset Lamp Timer Reset / Cancel
Lamp TimerLamp Usage Time (Normal Mode, 
Economic Mode, SmartEco Mode)/
Equivalent Lamp Hour
Security SettingChange Passward
Change Security 
SettingsPower On Lock/Web Control 
Lock
Baud Rate2400/4800/9600/14400/19200/
38400/57600/115200
Te s t  P a t t e r n O n / O f f
Closed CaptionClosed Caption...

Operation 52
Note that the menu items are available when the projector detects at least one valid signal. 
If there is no equipment connected to the projector or no signal detected, limited menu 
items are accessible.
6. 
InformationCurrent System 
Status•Source
•Picture Mode
•Lamp Mode
•Resolution
•3D Format
•Color System
• Lamp Usage Time
• Firmware Version
Main menu Sub-menu Options 

Operation53
Description of each menu
FUNCTIONDESCRIPTION 
1. Display menu
Wall colorCorrects the projected picture’s color when the projection surface 
is not white. See Using Wall Color on page 37 for details.
Aspect RatioThere are several options to set the images aspect ratio depending 
on your input signal source. See Selecting the aspect ratio on page 
35 for details.
2D KeystoneAdjusts the shape of the projected image to ensure straight lines on 
all four corners. See Correcting 2D Keystone on page...

Operation 54
1. Display menu
3D
This projector features a 3D function which enables you to enjoy 
the 3D movies, videos, and sporting events in a more realistic way 
by presenting the depth of the images. You need to wear a pair of 
3D glasses to view the 3D images.
3D Mode
The default setting is Auto and the projector automatically chooses 
an appropriate 3D format when detecting 3D contents. If the 
projector cannot recognize the 3D format, press ◄/► to choose a 
3D mode.
When the 3D function is on:
•...

Operation55
2. Picture menu
Picture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. 
See Selecting a picture mode on page 37 for details.
Reference 
ModeSelects a picture mode that most suits your need for the image 
quality and further fine-tune the image based on the selections listed 
on the same page below. 
See Setting the User 1/User 2 mode on page 38 for details.
BrightnessAdjusts the brightness of the image.
See Adjusting...

Operation 56
3. Source menuQuick Auto 
SearchSee Switching input signal on page 33 for details.
Color Space 
Conversion
See Changing Color Space on page 34 for details.
4. System Setup: Basic menuPresentation 
TimerReminds the presenter to finish the presentation within a certain 
time frame. See Setting the presentation timer on page 41 for 
details.
LanguageSets the language for the On-Screen Display (OSD) menus. 
See Using the menus on page 30 for details.
Projector 
Installation The projector can be...

Operation57
4. System Setup: Basic menuOperation 
Setting
Direct Power On
Powers projector on automatically when the power cable is 
connected.
Signal Power On
Sets whether to turn the projector directly on without pressing 
POWER or ON when the projector is in standby mode and the 
signal is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is 
detected after a set period of time. 
See Setting Auto Power Off on page 63 for details.
Quick...

Operation 58
5. System Setup: Advanced menu
High Altitude 
ModeA mode for operation in high altitude areas. 
See Operating in a high altitude environment on page 44 for 
details.
Audio SettingsSee Adjusting the sound on page 45 for details.
Lamp Settings
Lamp Mode 
See Setting Lamp mode as Economic or SmartEco on page 62 for 
details.
Reset lamp timer
See Resetting the lamp timer on page 67 for details.
Lamp Timer
See Getting to know the lamp hour on page 62 for details on 
how the total lamp hour is...

Operation59
5. System Setup: Advanced menu
Standby 
Settings
Network
Enable Network Standby Mode
To enable or disable the network standby mode after the projector 
is automatically or manually turned off.
• On: The projector will maintain at network standby mode with 
less than 6W power consumption.
• Off: The projector will maintain at normal standby mode with 
less than 0.5W power consumption.
Auto Disable Network standby mode
To enable or disable the auto switch from network standby mode to...

Operation 60
The Information menu shows you the current operating status of the projector.
6. Information menu
Current 
System Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the Picture menu.
Lamp Mode
Shows the current lamp mode.
Resolution
Shows the native resolution of the input signal.
3D Format
Shows the current 3D mode.
Color System
Shows input system format, NTSC, PAL, SECAM, YUV or RGB.
Lamp Usage Time
Displays the number of hours the lamp has been used....