BenQ Projector MX852UST+ User Manual

Operation51
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the 
signal type selected.
Main menu Sub-menu Options
1. 
Display
Wall colorOff/Light Yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Key s t o n e
Position
Phase
H.size
Digital zoomPC:1.0X~2.0X; Video: 
1.0X~1.8X
3D3D modeAuto/Off/Frame sequential/
Frame packing/Top bottom/
Side by side
3D Sync Invert Disable/Invert
Save 3D Setting3D Settings 1/3D Settings 2/
3D...

Operation 52
2. 
Picture
Picture ModeDynamic/Presentation/
sRGB/Cinema/3D/User 1/
User 2
Reference 
ModeDynamic/Presentation/
sRGB/Cinema/3D
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color On/Off
Color 
Te m p e r a t u r eCool/Normal/Warm
Color 
Temperature 
Fine TuningR Gain/G Gain/B Gain/R 
Offset/
G Offset/B Offset
3D Color 
ManagementPrimary Color R/G/B/C/M/Y
Hue
Saturation
Gain
Reset picture 
settingsCurrent/All/Cancel
3. 
Source
Quick Auto 
SearchOn/Off
Color Space...

Operation53
4. 
System 
Setup: Basic
Presentation 
TimerTimer Period 1~240 min
Timer DisplayAlways/1 min/2mins/3 mins/
Never
Timer PositionTop-Left/Bottom-Left/Top-
Right/Bottom-Right
Timer Counting 
DirectionCount Down/Count up
Sound Reminder On/Off
On/Off Yes/No
Language
Projector 
Installation F r o n t  Ta b l e / R e a r  Ta b l e / R e a r  
Ceiling/Front Ceiling
Menu SettingMenu display 
Time5 sec/10 sec/20 sec/30 sec/
Always
Menu PositionCenter/Top-Left/Top-Right/
Bottom-Right/Bottom-Left...

Operation 54
4. 
System 
Setup: BasicPanel Key Lock On/Off
Background 
ColorBenQ / Black / Blue / Purple
Splash Screen BenQ / Black / Blue
5. 
System 
Setup: 
Advanced
High Altitude 
ModeOn/Off
Audio SettingsMute On/Off
Vo l u m e
Power on/off 
RingOn/Off
Lamp SettingsLamp ModeNormal/Economic/
SmartEco
Reset Lamp 
TimerReset / Cancel
Equivalent Lamp 
Hour
Security 
SettingChange 
Passward
Change Security 
SettingsPower On Lock/Web 
Control Lock
Baud Rate2400/4800/9600/14400/
19200/38400/57600/
1152000...

Operation55
Note that the menu items are available when the projector detects at least 
one valid signal. If there is no equipment connected to the projector or no 
signal detected, limited menu items are accessible.
5. 
System 
Setup: 
AdvancedNetwork 
settingsWired LANStatus
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
AMX Device 
DiscoveryOn/Off
Mac Address
Reset All 
SettingsReset / Cancel
6. 
InformationCurrent 
System Status
• Source
• Picture Mode
• Resolution
• Lamp Mode
• 3D...

Operation 56
Description of each menu
FUNCTIONDESCRIPTION 
1. Display menu
Wa l l  c o l o r
Corrects the projected picture’s color when the 
projection surface is not white. See Using Wall Color on 
page 39 for details.
Aspect Ratio
There are several options to set the images aspect ratio 
depending on your input signal source. See Selecting the 
aspect ratio on page 36 for details.
Key s t o n eCorrects any keystoning of the image manually. See 
Correcting keystone on page 30 for details.
Po s i t i o...

Operation57
1. Display menu
3D
This projector features a 3D function which enables you 
to enjoy the 3D movies, videos, and sporting events in a 
more realistic way by presenting the depth of the images. 
You need to wear a pair of 3D glasses to view the 3D 
images.
3D Mode
The default setting is Auto and the projector 
automatically chooses an appropriate 3D format when 
detecting 3D contents. If the projector cannot recognize 
the 3D format, press  /  to choose a 3D mode.
When the 3D function is on:
•...

Operation 58
2. Picture menu
Picture Mode
Pre-defined picture modes are provided so you can 
optimize your projector image set-up to suit your 
program type. 
See Selecting a picture mode on page 39 for details.
Reference 
Mode
Selects a picture mode that most suits your need for the 
image quality and further fine-tune the image based on the 
selections listed on the same page below. 
See Setting the User 1/User 2 mode on page 40 for 
details.
BrightnessAdjusts the brightness of the image.
See Adjusting...

Operation59
3. Source menuQuick Auto 
SearchSee Switching input signal on page 35 for details.
Color Space 
Conversion
See Changing Color Space on page 35 for details.
4. System Setup: Basic menu
Presentation 
TimerReminds the presenter to finish the presentation within a 
certain time frame. See 
Setting the presentation timer on 
page 43
 for details.
Language
Sets the language for the On-Screen Display (OSD) 
menus. 
See Using the menus on page 31 for details.
Projector 
Installation The projector can...

Operation 60
4. System Setup: Basic menu
Operation 
Setting
Direct Power On
Powers projector on automatically when the power cable 
is connected.
Auto Power Off
Allows the projector to turn off automatically if no input 
signal is detected after a set period of time. 
See Setting Auto Power Off on page 67 for details.
Quick Cooling
Enables or disables the Quick Cooling function. 
Selecting On enables the function and the projector 
cooling time will be shortened from a normal 90 second 
duration to...