BenQ Projector MX810ST/MW811ST/MX812ST User Manual

Operation 51 2. The Special Feature page provides some advanced functions to manage the projected 
images.
• To display a full screen, click Full Screen.
• To display a partial screen, click Selectable. A square appears on your screen. You 
can adjust its size and place it where you want to project.
• To pause projection, click Pause.
• If there are multiple computers connected to the projector, you can decide a 
display location by clicking 1, 2, 3, 4, L, R, or Full Screen.
3. The Basic Settings page...

Operation 52• The Q Presenter only accepts up to 8 characters consisting of English capitalized 
letters and digits 0-9 for the name, full 6 digits consisting of 1 to 4 for the 
password.
• To change the Q Presenter interface language, click the down arrow to reveal a 
drop-down list and select a desired language. Click Apply.
• To allow notification messages to appear, click Yes. Click Apply.
• To display your computer screen on multiple projectors, click Activate 1:N 
D i s p l ay.  C l i c k  Ap p l...

Operation 53
Presenting from a USB Reader
This feature displays a slide show of images stored on a USB flash drive connected to the 
projector. It can eliminate the need for a computer source.
Supported image formats:
•  A square box will be displayed on the filename for unidentified characters.
•  Thai filename is not supported.
•  Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than 
WXGA (1280 x 800) only.
•  If a folder consists of more than 200 photos, only the...

Operation 54
Shutting down the projector
1. Press  POWER on the projector or   OFF on the remote control, and a 
confirmation message will be displayed prompting you. 
If you dont respond in a few seconds, the message will disappear.
2. Press  POWER a second time. The POWER indicator light flashes orange, the 
projection lamp shuts down, and the fans will continue to run for approximately 90 
seconds to cool down the projector.
To protect the lamp, the projector will not respond to any commands during...

Operation 55
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected and the projector model you are using.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Auto Keystone
Keystone
Position
Phase
H. Size
Digital Zoom
3D Sync On/Off
3D Sync Invert Disable/Invert
Teaching 
TemplateBlackboardOff/Letter Formation/Musical 
Staff/Worksheet/Coordinate Chart...

Operation 56
Main menu Sub-menu Options
4. 
SYSTEM 
SETUP: 
Basic
Language
Projector PositionFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Menu SettingsMenu Display 
Time5 sec/10 sec/15 sec/20 sec/25 
sec/30 sec
Menu PositionCenter/Top-Left/Top-Right/
Bottom-Right/Bottom-Left
Reminder 
MessageOn/Off
Operation 
SettingsDirect Power On On/Off
Auto Power OffDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Blank TimerDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Sleep TimerDisable/30 min/1 hr/2...

Operation 57 Note that the menu items are available when the projector detects at least one valid signal. If 
there is no equipment connected to the projector or no signal detected, limited menu items 
are accessible.
Main menu Sub-menu Options
5. 
SYSTEM 
SETUP: 
Advanced
Closed CaptionClosed Caption 
EnableOn/Off
Caption Version CC1/CC2/CC3/CC4
Standby 
SettingsNetwork On/Off
Microphone On/Off
Monitor Out On/Off
Network 
SettingsWired LANStatus
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server...

Operation 58
Description of each menu
Function Description
Wall ColorCorrects the projected picture’s color when the projection surface is not 
white. See Using Wall Color on page 33 for details.
Aspect RatioThere are several options to set the images aspect ratio depending on 
your input signal source. See Selecting the aspect ratio on page 31 for 
details.
Auto 
KeystoneAutomatically corrects any keystoning of the image. See Correcting 
keystone on page 25 for details.
KeystoneCorrects any keystoning...

Operation 59
Function Description
Teaching 
Template
Provides several preset patterns for various teaching purposes.
Choose Blackboard or Whiteboard first by pressing  /  and press 
/  to choose the pattern you need. Once you are done, go back to 
the PICTURE > Teaching Template > Blackboard or Whiteboard 
(depending on which item you previously selected) menu and select 
Off.
Picture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type....

Operation 60
Function Description
Quick Auto 
SearchSee Switching input signal on page 30 for details.
Color Space 
ConversionSee Changing Color Space (MX762 ST only) on page 30 for details.
Presentation 
TimerReminds the presenter to finish the presentation within a certain time 
frame. See Setting the presentation timer on page 36 for details.
LanguageSets the language for the On-Screen Display (OSD) menus. See Using 
the menus on page 26 for details.
Projector 
PositionThe projector can be installed...