Home > BenQ > Projector > BenQ Projector MX723 User Manual

BenQ Projector MX723 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual BenQ Projector MX723 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    Maintenance 71
    11. Restart the projector.
    Do not turn the power on with the lamp cover removed.
    Resetting the lamp timer
    12. After the startup logo, open the On-Screen 
    Display (OSD) menu. Go to the  SYSTEM 
    SETUP: Advanced  > Lamp Settings  menu. 
    Press  Mode/Enter . The Lamp Settings  page 
    displays. Press   to select  Reset lamp timer 
    and press  Mode/Enter . A warning message 
    displays asking if you want to reset the lamp timer. Select  Yes and press  Mode/
    Enter . The lamp time will be reset to 0.
    Do not reset if the lamp is not new or replaced as this could cause damage.  7. Tighten the screws that secure the  lamp.
    • Loose screw may cause a bad  connection, which could result in 
    malfunction.
    • Do not over tighten the screws.
    8. Ensure the handle is fully laid flat and  locked in place.
    9. Replace the lamp cover by sliding it  into place.
    10. Tighten the screw that secures the  lamp cover. 
    • Loose screw may cause a bad  connection, which could result in 
    malfunction.
    • Do not over tighten the screw.
    (a) (b) 
    						
    							
    Maintenance
    72
    Indicators
    LightStatus & DescriptionPOWERTEMPLAMP1LAMP2
    Pow e r  eve n t s
    Orange Off Off Off
    Stand-by
    Green
    Flashing Off Off OffPowering up
    Green Off Off OffNormal operation
    Orange
    Flashing Off Off OffNormal power-down cooling
    Red Off Off OffDownload
    Green Off Red OffCW start fail
    Red 
    Flashing Off Off OffScaler shutdown fail (data abord)
    Red Off Red OffScaler reset fail (video projector only)
    Off Red Off OffLAN download fail
    Off Green Off OffLAN download processing
    Burn-in message
    Green Off Off
    Burn-in ON
    Green Green GreenBurn-in OFF
    Lamp error messages
    Off Off Red Off
    Lamp1 error in normal operation
    Off Off Orange OffLamp is not lit up
    Thermal error messages
    Red Red Off Off
    Fan 1 error (the actual fan speed is  ±25% outside 
    the desired speed)
    Red Red 
    Flashing Off OffFan 2 error (the actual fan speed is 
    ±25% outside 
    the desired speed)
    Red Green Off OffFan 3 error (the actual fan speed is  ±25% outside 
    the desired speed)
    Green Red Off OffTemperature 1 error (over limited temperature)
    Green Red 
    Flashing Off OffThermal Sensor 1 open error
    Green Green Off OffThermal Sensor 1 short error
    GreenGreen
    Flashing Off OffThermal IC #1 I2C Connection error
    Green
    Flashing Red Off OffTemperature 2 error (over limited temperature)
    Green
    Flashing Red 
    Flashing Off OffThermal Sensor 2 open error 
    						
    							
    Maintenance 73
    Green
    Flashing Green Off OffThermal Sensor 2 short error
    Green
    Flashing Green
    Flashing Off OffThermal IC #2 I2C Connection error 
    						
    							
    Troubleshooting
    74
    Troubleshooting
    The projector does not turn on.
    No picture
    Blurred image
    Remote control does not work
    The password is incorrect
    CauseRemedy
    There is no power from the power 
    cable. Plug the power cord into the AC inlet on the 
    projector, and plug the power cord into the 
    power outlet. If the power outlet has a 
    switch, make sure that it is switched on.
    Attempting to turn the projector on 
    again during the cooling process. Wait until the cooling down process has 
    completed.
    CauseRemedy
    The video source is not turned on or 
    connected correctly.
    Turn the video source on and check that the 
    signal cable is connected correctly.
    The projector is not correctly 
    connected to the input signal device. Check the connection.
    The input signal has not been 
    correctly selected. Select the correct input signal with the 
    Source
     key on the projector or remote 
    control.
    The lens cover is still closed. Open the lens cover.
    CauseRemedy
    The projection lens is not correctly 
    focused. Adjust the focus of the lens using the focus 
    ring.
    The projector and the screen are not 
    aligned properly. Adjust the projection angle and direction as 
    well as the height of the unit if necessary.
    The lens cover is still closed. Open the lens cover.
    CauseRemedy
    The battery is out of power. Replace the battery with new one.
    There is an obstacle between the 
    remote control and the projector. Remove the obstacle.
    You are too far away from the 
    projector. Stand within 8 meters (26 feet) of the 
    projector.
    CauseRemedy
    You do not remember the password.
    Please see 
    Entering the password recall 
    procedure on page 34  for details. 
    						
    							
    Specifications 75
    Specifications
    All specifications are subject to change without notice.
    Optical
    Resolution(MX723)
    1024 x 768 XGA
    (MW724)
    1280 x 800 WXGA
    Display system 1-CHIP DMD
    Lens F/Number (MX723)
    F= 2.5~3.12  
    f=  16mm~25.46mm
    (MW724)
    F= 2.41~2.78 
    f= 15.76mm~21.11mm
    Offset (MX723)130%
    (MW724)125%
    Zoom ratio(MX723)1.6X
    (MW724)1.36X
    Lamp
    (MX723)260W
    (MW724)240W
    Electrical
    Power supplyAC100–240V, 3.4 A,
    50-60 Hz (Automatic)
    Power consumption
    (MX723) 335W (Max.); < 0.5 W; < 6 W 
    (when the Network function in the 
    Standby Settings is on)
    (MW724) 315W (Max.); < 0.5 W; < 6 W 
    (when the Network function in the 
    Standby Settings is on)
    Mechanical
    We i g h t(MX723) 2.9 kg
    (MW724) 3.0 kg
    Output terminals
    RGB outputD-Sub 15-pin (female) x 1
    Speaker (Stereo) 10 watt x 1
    Audio signal output PC audio jack x 1
    Control
    IR receiver x 1 (front)
    RS-232 serial control9 pin x 1
    LAN control
    Wired (RJ45)
    USB Mini B
    Supports firmware upgrade
    Type A
    1.5A output
    Input terminals
    Computer input
    RGB inputD-Sub 15-pin (female) x 2
    Video signal input S-VIDEOMini DIN 4-pin port x 1
    VIDEO RCA jack x 1
    SD/HDTV signal input
    Analog - Component RCA jack x 3
       (through RGB input)
    Digital-HDMI x 1
    Audio signal input Audio inPC audio jack x 1 for audio input
    PC audio jack x 1 for microphone 
    audio input
    RCA audio jack (L/R) x 2
    Environmental Requirements
    Operating temperature 0°C-40°C at sea level
    Operating relative humidity 10%-90% (without condensation)
    Operating altitude
    0-1499 m at 0°C-35°C
    1500-3000 m at 0°C-30°C (with High 
    Altitude Mode on)
    Lamp life results will vary depending on environmental conditions and usage. 
    						
    							
    Specifications
    76
    Dimensions
    327.3 mm (W) x 136.7 mm (H) x 232.8 mm (D )
    Ceiling mount installation
    Ceiling mount screw: M4
    (Max L = 25 mm; Min L = 20 mm)
    Unit: mm 
    						
    							
    Specifications 77
    Timing chart
    Supported timing for PC input
    ResolutionTimingHorizontal Frequency  (KHz)Ve r t i c a l  
    Frequenc y (Hz)Pixel 
    Frequency  (MHz)3D Field Sequent ial3D 
    top 
    bott om3D 
    side  by 
    side
    640 x 480 VGA_60 59.94 31.469 25.175
    ◎◎◎
    VGA_72 72.809 37.861 31.500
    VGA_75 75 37.5 31.500
    VGA_85 85.008 43.269 36.000
    720 x 400 720 x 
    400_70 70.087 31.469 28.3221
    800 x 600 SVGA_60 60.317 37.879 40.000
    ◎◎◎
    SVGA_72 72.188 48.077 50.000
    SVGA_75 75 46.875 49.500
    SVGA_85 85.061 53.674 56.250
    SVGA_120 (Reduce 
    Blanking) 119.854 77.425 83.000
    ◎
    1024 x 768 XGA_60 60.004 48.363 65.000
    ◎◎◎
    XGA_70 70.069 56.476 75.000
    XGA_75 75.029 60.023 78.750
    XGA_85 84.997 68.667 94.500
    XGA_120 (Reduce 
    Blanking) 119.989 97.551 115.5
    ◎
    1152 x 864 1152 x 
    864_75 75 67.5 108
    1024 x 576 BenQ 
    Notebook  Timing 60 35.82 46.966
    1024 x 600 BenQ 
    Notebook  Timing 64.995 41.467 51.419
    1280 x 720 1280 x 
    720_60 60 45 74.250
    ◎◎◎
    1280 x 
    720_120 120 90.000 148.500
    ◎
    1280 x 768 1280 x 
    768_60 59.87 47.776 79.5
    ◎◎◎
    1280 x 800 WXGA_60 59.81 49.702 83.500
    ◎◎◎
    WXGA_75 74.934 62.795 106.500
    WXGA_85 84.88 71.554 122.500
    WXGA_120 (Reduce 
    Blanking) 119.909 101.563 146.25
    ◎
    1280 x 1024 SXGA_60 60.02 63.981 108.000
    ◎◎
    SXGA_75 75.025 79.976 135.000
    SXGA_85 85.024 91.146 157.500
    1280 x 960 1280 x 
    960_60 60 60 108.000
    ◎◎
    1280 x 
    960_85 85.002 85.938 148.500
    1360 x 768 1360 x 
    768_60 60.015 47.712 85.5
    ◎◎
    1440 x 900 WXGA+_6
    0 59.887 55.935 106.500
    ◎◎
    1400 x 1050 SXGA+_60 59.978 65.317 121.750 ◎◎
    1600 x 1200 UXGA 60 75 162.000 ◎◎ 
    						
    							
    Specifications
    78 • The timings showing above may not be supported due to EDID file and 
    VGA graphic card limitations. It is possible that some timings cannot be 
    chosen.
    Supported timing for HDMI (HDCP) input
    1680 x 1050 1680 x 
    1050_60 59.954 65.29 146.25
    ◎◎
    1920 x 1080 1920 x 
    1080_60 (Reduce 
    Blanking) 67.5 60 148.5
    1920 x 1200 1920 x 
    1200_60
    (Reduce 
    Blanking) 59.95 74.038 154.000
    640 x 480 @67Hz MAC13 66.667 35 30.240
    832 x 624 @75Hz MAC16 74.546 49.722 57.280
    1024 x 768 @75Hz MAC19 75.02 60.241 80.000
    1152 x 870 @75Hz MAC21 75.06 68.68 100.000
    ResolutionTimingHorizontal 
    Frequency  (KHz)Ve r t i c a l  
    Frequenc y (Hz)Pixel 
    Frequency  (MHz)3D Field Sequent ial3D 
    top 
    bott om3D 
    side  by 
    side
    640 x 480 VGA_60 59.94 31.469 25.175
    ◎◎◎
    VGA_72 72.809 37.861 31.500
    VGA_75 75 37.5 31.500
    VGA_85 85.008 43.269 36.000
    720 x 400 720 x 
    400_70 70.087 31.469 28.3221
    800 x 600 SVGA_60 60.317 37.879 40.000
    ◎◎◎
    SVGA_72 72.188 48.077 50.000
    SVGA_75 75 46.875 49.500
    SVGA_85 85.061 53.674 56.250
    SVGA_120 (Reduce 
    Blanking) 119.854 77.425 83.000
    ◎
    1024 x 768 XGA_60 60.004 48.363 65.000
    ◎◎◎
    XGA_70 70.069 56.476 75.000
    XGA_75 75.029 60.023 78.750
    XGA_85 84.997 68.667 94.500
    XGA_120 (Reduce 
    Blanking) 119.989 97.551 115.5
    ◎
    1152 x 864 1152 x 
    864_75 75 67.5 108
    1024 x 576 BenQ 
    Notebook  Timing 60 35.82 46.966
    1024 x 600 BenQ 
    Notebook  Timing 64.995 41.467 51.419
    1280 x 720 1280 x 
    720_60 60 45 74.250
    ◎◎◎
    1280 x 768 1280 x 
    768_60 59.87 47.776 79.5
    ◎◎◎ 
    						
    							
    Specifications 79
    The timings showing above may not be supported due to EDID file and 
    VGA graphic card limitati
    ons. It is possible that some timings cannot be 
    chosen.
    Supported 3D signal for Video input
    Supported timing for Component-YPbPr input
    1280 x 800 WXGA_60 59.81 49.702 83.500
    ◎◎◎
    WXGA_75 74.934 62.795 106.500
    WXGA_85 84.88 71.554 122.500
    WXGA_120 (Reduce 
    Blanking) 119.909 101.563 146.25
    ◎
    1280 x 1024 SXGA_60 60.02 63.981 108.000
    ◎◎
    SXGA_75 75.025 79.976 135.000
    SXGA_85 85.024 91.146 157.500
    1280 x 960 1280 x 
    960_60 60 60 108.000
    ◎◎
    1280 x 
    960_85 85.002 85.938 148.500
    1360 x 768 1360 x 
    768_60 60.015 47.712 85.5
    ◎◎
    1440 x 900 WXGA+_6
    0 59.887 55.935 106.500
    ◎◎
    1400 x 1050 SXGA+_60 59.978 65.317 121.750 ◎◎
    1600 x 1200 UXGA 60 75 162.000 ◎◎
    1680 x 1050 1680 x 
    1050_60 59.954 65.29 146.25
    ◎◎
    640 x 480 @67Hz MAC13 66.667 35 30.240
    832 x 624 @75Hz MAC16 74.546 49.722 57.280
    1024 x 768 @75Hz MAC19 75.02 60.241 80.000
    1152 x 870 @75Hz MAC21 75.06 68.68 100.000
    1920 x 1080 1920 x 
    1080_60  (Reduce 
    Blanking) 67.5 60 148.5
    1920 x 1200 1920 x 
    1200_60 
    (Reduce 
    Blanking) 59.95 74.038 154.000
    Video modeHorizontal 
    Frequency (kHz)Ve r t i c a l  
    Frequency (Hz)Color sub-
    carrier 
    Frequency  (MHz)3D Field 
    Sequential
    NTSC 15.73 60 3.58 ◎
    PAL 15.63 50 4.43
    SECAM 15.63 50 4.25 or 4.41
    PAL-M 15.73 60 3.58
    PAL-N 15.63 50 3.58
    PAL-60 15.73 60 4.43
    NTSC4.43 15.73 60 4.43
    TimingResolutionHorizontal  Frequency  (KHz)Ve r t i c a l  
    Frequency  (Hz)Pixel 
    Frequency  (MHz)3D Field 
    Sequential
    480i 720 x 480 15.73 59.94 13.5 ◎ 
    						
    							
    Specifications
    80
    480p 720 x 480 31.47 59.94 27 ◎
    576i 720 x 576 15.63 50 13.5
    576p 720 x 576 31.25 50 27
    720/50p 1280 x 720 37.5 50 74.25
    720/60p 1280 x 720 45.00 60 74.25 ◎
    1080/50i 1920 x 1080 28.13 50 74.25
    1080/60i 1920 x 1080 33.75 60 74.25
    1080/24P 1920 x 1080 27 24 74.25
    1080/25P 1920 x 1080 28.13 25 74.25
    1080/30P 1920 x 1080 33.75 30 74.25
    1080/50P 1920 x 1080 56.25 50 148.5
    1080/60P 1920 x 1080 67.5  60 148.5 
    						
    All BenQ manuals Comments (0)

    Related Manuals for BenQ Projector MX723 User Manual