BenQ Projector MX723 User Manual

Operation 51
4. 
SYSTEM 
SETUP: 
Basic
Presentation 
Timer
Timer Period
1~240 minutes
Timer Display Always
/1 min/2 min/3 min/
Never
Timer Position Top-Left
/Bottom-Left/Top-
Right/Bottom-Right
Timer Counting 
Direction Count Down
/Count Up
Sound 
Reminder On/
Off
On /Off Yes /No
Language
Projector 
Installation Front Table
/Rear Table/Rear 
Ceiling/Front Ceiling
Menu Settings Menu Display 
Time
5 secs/10 secs/
20 secs /30 secs/
Always
Menu Position Center
/Top-Left/Top-Right/
Bottom-Right/Bottom-Left...

Operation
52 4. 
SYSTEM 
SETUP: 
Basic
Operation 
Settings Direct Power 
On
On/
Off
Signal Power 
On Computer / YPbPr
HDMI
Auto Power Off Disable/3 min/10 min/15 min/
20 
min /25 min/30 min
Quick Cooling On/Off
Instant Restart On/Off
Blank Timer Disable
/5 min/10 min/15 min/
20 min/25 min/30 min
Sleep Timer Disable
/30 min/1 hr/2 hrs/3 
hrs/4 hrs/8 hrs/12 hrs
Panel Key 
Lock On/
Off Ye s /No
Background 
Color BenQ
/Black/Blue/Purple
Splash Screen BenQ /Black/Blue 

Operation 53
5. 
SYSTEM 
SETUP: 
Advanced
High Altitude 
Mode
On/
Off Ye s /No
Audio Settings Mute
On/Off
Volume 0~10
Microphone 
Volume 0~10
Power On/Off 
Ring Tone On
/Off
Lamp Settings Lamp Mode
Normal/Economic/SmartEco
Reset lamp 
timer Yes/No
Lamp 
Information Lamp Usage Time
Normal
Economic
SmartEco
Equivalent Lamp Hour
Security 
Settings Change Password
Change 
Security 
Settings
Power On Lock
On/Off
Web Control 
Lock On/
Off
Baud Rate 2400/4800/9600/19200/38400/
57600/
115200
Te s t  P a t t e r...

Operation
54 Note that the menu items are available when the projector detects at least one valid 
signal. If there is no equipment connected to the projector or no signal detected, 
limited menu items are accessible.
5. 
SYSTEM 
SETUP: 
Advanced
Network 
Settings Wired LAN Status
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Projection 
Login Code On/
Off
AMX Device 
Discovery On/
Off
Mac Address
Reset All 
Settings Reset/
Cancel
6. 
INFORMATI
ON Current System Status Source
Picture...

Operation 55
Description of each menu
• The default values listed in this manual, especially on pages 55-64, are 
for reference only. They may vary between the projectors due to the 
continuous improvement to the  products.
FUNCTIONDESCRIPTION
Wall Color Corrects the projected picture’s color when the projection 
surface is not white. See 
Using Wall Color on page 39  for 
details.
Aspect Ratio There are four options to set the images aspect ratio depending 
on your input signal source. See 
Selecting...

Operation
56
FUNCTIONDESCRIPTION
3D This projector features a 3D function which enables you to enjoy 
the 3D movies, videos, and sporting events in a more realistic 
way by presenting the depth of the images. You need to wear a 
pair of 3D glasses to view the 3D images.
3D Mode
The default setting is 
Auto and the projector automatically 
chooses an appropriate 3D format when detecting 3D contents. 
If the projector cannot recognize the 3D format, press  /  to 
choose a 3D mode.
3D Sync Invert
When you...

Operation 57
FUNCTIONDESCRIPTION
Picture Mode Pre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See 
Selecting 
a picture mode on page 38  for details.
Reference 
Mode Selects a picture mode that best suits your need for the image 
quality and further fine-tune the image based on the selections 
listed on the same page below. See 
Setting the User 1/User 2 
mode on page 38  for details.
This function is only available when User 1 or User...

Operation
58
FUNCTIONDESCRIPTION
Color 
Te m p e r a t u r e See 
Selecting a Color Temperature on page 40  for details.
This function is only av ailable when User 1/2 is 
selected.
Color 
Te m p e r a t u r e  
Fine Tuning See 
Setting a preferred color temperature on page 40  for 
details.
3D Color 
Management See 
3D Color Management on page 40  for details.
This function is only av ailable when User 1/2 is 
selected.
Reset Picture 
Setting See 
Resetting current or all picture modes on page 42  for...

Operation 59
FUNCTIONDESCRIPTION
Presentation 
Timer Reminds the presenter to finish the presentation within a certain 
time frame. See 
Setting the presentation timer on page 43  for 
details.
Timer Period
Sets a preferred length of time for presentation.
Timer Display
Sets whether to display the timer on screen.
Timer Position
Sets the position where the timer displays on screen.
Timer Counting Direction
Sets the timer counting direction.
Sound Reminder
Sets a sound reminder if timer is up.
Language...

Operation
60
FUNCTIONDESCRIPTION
Operation 
Settings Direct Power On
Selecting 
On enables the function. See  Starting up the 
projector on page 27  for details.
Signal Power On
Selecting On  the projector will turn on automatically when VGA 
signal is detected. 
Selecting Off  the projector has to be turnned 
on manually (by keypad or remote).
 See Starting up the 
projector on page 27
 for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is 
detected after a...