BenQ Projector MS527E User Manual

Operation 41
To cancel the timer, perform the following steps.
• Using the remote control. 
Press Timer On and press  /  to highlight Off and press MODE/ENTER.
• Using the OSD menu.
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and 
highlight Off.
Press MODE/ENTER. A confirmation message displays.
2. Highlight Yes and press MODE/ENTER to confirm. 
How to use the Timer On key?
Timer On is a multi-functional key.
• If the presentation timer is off, pressing this 
key activates the timer.
• If...

Operation
42
Hiding the image
Press the Eco Blank button from projector or remote control to turn off the image 
for a period of time with up to 70% lamp power saving. Press any key on the projector 
or remote control to restore the image. 
The word Eco Blank appears at the screen 
while the image is hidden. When this function is 
activated with an audio input connected,the audio 
can still be heard.  
• Eco Blank: Save up 70% of your lamp power. 
Time to do your part in saving the planet. 
The automatic...

Operation 43
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is 1500 
m –3000 m above sea level, and ambient temperature is between 0°C–35°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 
1500 m and ambient temperature is between 0°C and 35°C. The projector 
will be over cooled, if you turn the mode on under such a condition.
To activate the High Altitude Mode:
1. Press MENU/EXIT and then press  /  until the SYSTEM SETUP:...

Operation
44
U s e  Te a c h i n g  Te m p l a t e
Making writing on the board easier for teachers, you can use build-in template by 
OSD or remote control.  
Open the OSD menu and go to the DISPLAY > Teaching Template . Select 
Blackboard/ Whiteboard. >  Off/ Letter Formation/ Worksheet/ 
Coordinate Chart. The Teaching Template displays.
Teaching 
TemplateWhiteboardBlackboard
Letter 
Formation
Worksheet
Coordinate 
Chart 

Operation 45
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The 
following settings do not affect the projection settings, operation, or performance. 
•Menu display Time in the SYSTEM SETUP: Basic > Menu Settings menu 
sets the length of time the OSD will remain active after your last key press. The 
time length ranges from 5 to 30 seconds in 5-second increments. Use  /  to 
select a suitable time frame.
•Menu Position in the SYSTEM...

Operation
46
Shutting down the projector
1. Press POWER and a confirmation 
message displays prompting you. 
If you dont respond in a few seconds, the 
message will disappear.
2. Press POWER a second time. The 
POWER indicator light flashes orange, 
the projection lamp shuts down, and the 
fans will continue to run for approximately 
90 seconds to cool down the projector.
• To protect the lamp, the projector will 
not respond to any commands during 
the cooling process.
• To shorten the cooling time, you...

Operation 47
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light Green/
Blue/Blackboard
Aspect RatioAuto/Real/4:3/16:9/16:10
Keystone
Position
Phase
H. Size
Digital Zoom
3D3D modeAuto/Top-Bottom/Frame 
sequential/Frame packing/Side By 
side/Off
3D Sync InvertDisable/Invert
Save 3D 
Settings3D Settings 1/3D Settings 2/3D 
Settings 3
Apply 3D 
Settings3D...

Operation
48
2. 
PICTURE
Picture ModeBright/Presentation/sRGB/Cinema/(3D)/User 1/User 
2
Reference 
ModeBright/Presentation/sRGB/Cinema/(3D)
Brightness
Contrast
Color
Tint
Sharpness
Brilliant ColorOn/Off
Color 
Temperature Cool/Normal/Warm
Color 
Temperature 
Fine TuningR Gain/G Gain/B Gain/R Offset/G 
Offset/B Offset
3D Color 
ManagementPrimary Color R/G/B/C/M/Y
Hue
Saturation
Gain
Reset Picture 
SettingsCurrent/All/
Cancel
3. SOURCEQuick Auto SearchOn/Off
Color Space ConversionAuto/RGB/YUV 

Operation 49
4. 
SYSTEM 
SETUP: 
Basic
Presentation 
TimerTimer Period 1~240 minutes
Timer DisplayAlways/3 min/2 min/1 min/
Never
Timer PositionTop-Left/Bottom-Left/Top-
Right/Bottom-Right
Timer Counting 
DirectionCount Down/Count Up
On/Off Yes/No
Language
Projector InstallationFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Menu SettingsMenu display Time5 secs/10 secs/20 secs/30 secs/
Always
Menu PositionCenter/Top-Left/Top-Right/
Bottom-Right/Bottom-Left
Reminder message On/Off
Operation...

Operation
50Note that the menu items are available when the projector detects at least one valid 
signal. If there is no equipment connected to the projector or no signal detected, 
limited menu items are accessible.
5. 
SYSTEM 
SETUP: 
Advanced
High Altitude 
ModeOn/Off Yes/No
Audio SettingsMute On/Off
Volume 0~10
Lamp SettingsLamp ModeNormal/Economic/SmartEco/ 
LampSave
Reset Lamp Timer Reset/Cancel
Equivalent Lamp Hour
Security 
SettingsChange Password
Change Security Power on lock
Baud...