BenQ Projector MP610 User Manual

Operation 25
Selecting an application mode
The projector is preset with several predefined application modes 
so that you can choose one to suit your operating environment and 
input source picture type. To select a operation mode that suits 
your need, press Mode. The picture modes available for different 
types of signals are shown below. See Application Mode on page 
29 for details.
Switching input signal
The projector can be connected to multiple devices at 
the same time. However, it can only...

Operation 26
Remote paging operations
You can operate your display software program (on a connected PC) which 
responds to page up/down commands (like Microsoft PowerPoint) by 
pressing 
Page Up and Page Dow n on the remote control. See 
Connecting a computer on page 15 for details. 
Connect the projector to your PC or notebook with a USB cable prior to 
using this function. 
Freezing the image
Press the Freeze button on the remote control to freeze the image. 
An icon   will display in the lower right...

Operation 27
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
*When a Video or S-Video signal is connected, the function is only available with NTSC 
system selected.
Functions available when receiving different signal types...
Sub-MenuPCVideo / S-VideoComponent Video 
Picture
Application Mode
Keystone
Color Temp
Brightness
ContrastApplication Mode
Keystone
Color Temp
Brightness
Contrast
Color
Tint*
Pro-Picture
Auto Resize
Aspect...

Operation 28
Using the menus
The projector is equipped with on-screen display (OSD) menus for making various 
adjustments and settings.
There are 17 different menu languages. (Refer to page 4. Advance menu on page 33 for 
more details.)
The following example describes the adjustment of the keystone.
1. Press 6 Menu on the projector or Menu 
on the remote control to turn the on-
screen menu on.4. Adjust keystone values by 
pressing Left 3/ Right 4on the 
projector or Left 3/ Right 4 on 
the remote...

Operation 29
1. Picture menu
Some picture adjustments are available only when certain input sources are in use. 
Unavailable adjustments are not shown on the screen.
FUNCTION 
(default setting 
/ value)
DESCRIPTION
Application 
Mode
(PC: 
Brightest;
YPbPr/ S-
Video/ Video: 
Movie)
Pre-defined application modes are provided so you can optimize your 
projector image set-up to suit your program type.
You can use the remote control Mode button to select a predefined 
application mode. See Selecting an...

Operation 30
Color Temp 
(depends on 
the selected 
Application 
mode)
There are four color temperature* settings are available.
1.T1: With the highest color temperature, T1 makes the image 
appear the most bluish white than other settings.
2.T2: Makes images appear bluish white.
3.T3: Maintains normal colorings for white.
4.T4: Makes images appear reddish white.
*About color temperatures:
There are many different shades that are considered to be “white” for 
various purposes. One of the common methods...

Operation 31
2. Pro-Picture menu
Some picture adjustments are available only when certain input sources are in use. 
Unavailable adjustments are not shown on the screen.
FUNCTION 
(default 
setting / value)
DESCRIPTION
Auto Resize 
(on)
Automatically resizes the input signal pixel resolution to the native resolution 
of the projector.
On: The pixel resolution of the input signal is converted to the native 
resolution of the projector (800 x 600). For input signals with lower 
resolutions, gaps in the...

Operation 32
3. Setting menu 
FUNCTION 
(default setting 
/ value)
DESCRIPTION
Mute (off)Toggles projector audio between on and off.
Volume (5)Adjusts audio volume level.
OSD Time 
(10)Sets the length of time the OSD will remain active after your last button 
press. The range is from 5 to 100 seconds.
Quick 
Cooling (off)Enables or disables the Quick Cooling function. Selecting On enables the 
function and projector cooling time will be shortened from a normal 90-
second duration to approximately 30...

Operation 33
4. Advance menu
FUNCTION 
(default setting 
/ value)
DESCRIPTION
Mirror (Floor 
front)The projector can be installed on a ceiling or behind a screen, or with one 
or more mirrors. Contact your dealer for the ceiling mount bracket 
(optional accessory) if you need to install the projector on your ceiling. 
Refer to Choosing a location on page 11 for more information.
Blank Time 
(20)Sets the image blank time when the Blank feature is activated, once 
elapsed the image will return to the...

Operation 34
High Altitude 
Mode (off)
A mode for operation in areas like high altitude or high temperature. We 
recommend you use the High Altitude Mode when your environment is 
higher than 3000 feet above sea level, or is hotter than 40
°C, or whenever 
the projector will be used for extended periods of time (>10 hours) 
without shutdown.
To activate the High Altitude Mode, select On by pressing Left 3/ Right 
4on the projector or remote control. A confirmation message displays. 
Press Auto.
Next time...