BenQ Projector LU9715 User Manual
Have a look at the manual BenQ Projector LU9715 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
71 Edge BlendingWrite Edge Blending On *eb=on# Write Edge Blending Off *eb=off# Read Edge Blending Status *eb=?# Write Edge Blending Reset *eb=reset# Write Edge Blending adjust lines On *ebadl=on# Edge Blending Write Edge Blending adjust lines Off *ebadl=off# Read Edge Blending adjust lines Status *ebadl=?# Write Edge Blending White Level Top Decrease *ebwt=-# Write Edge Blending White Level Top Increase *ebwt=+# Read Edge Blending White Level Top Status *ebwt=?# Write Edge Blending White Level Bottom Decrease *ebwb=-# Write Edge Blending White Level Bottom Increase *ebwb=+# Read Edge Blending White Level Bottom Status *ebwb=?# Write Edge Blending White Level Left Decrease *ebwl=-# Write Edge Blending White Level Left Increase *ebwl=+# Read Edge Blending White Level Left Status *ebwl=?# Write Edge Blending White Level Right Decrease *ebwr=-# Write Edge Blending White Level Right Increase *ebwr=+# Read Edge Blending White Level Right Status *ebwr=?# Write Edge Blending Black Level Top Decrease *ebbt=-# Write Edge Blending Black Level Top Increase *ebbt=+# Read Edge Blending Black Level Top Status *ebbt=?# Write Edge Blending Black Level Bottom Decrease *ebbb=-# Write Edge Blending Black Level Bottom Increase *ebbb=+# Read Edge Blending Black Level Bottom Status *ebbb=?# Write Edge Blending Black Level Left Decrease *ebbl=-# Write Edge Blending Black Level Left Increase *ebbl=+# Read Edge Blending Black Level Left Status *ebbl=?# Write Edge Blending Black Level Right Decrease *ebbr=-# Write Edge Blending Black Level Right Increase *ebbr=+# Read Edge Blending Black Level Right Status *ebbr=?# English
72 Edge BlendingWrite Edge Blending Black Level All color Decrease *ebca=-# Write Edge Blending Black Level All color Increase *ebca=+# Read Edge Blending Black Level All color Status *ebca=?# Write Edge Blending Black Level Red Decrease *ebcr=-# Write Edge Blending Black Level Red Increase *ebcr=+# Read Edge Blending Black Level Red Status *ebcr=?# Write Edge Blending Black Level Green Decrease *ebcg=-# Write Edge Blending Black Level Green Increase *ebcg=+# Read Edge Blending Black Level Green Status *ebcg=?# Write Edge Blending Black Level Blue Decrease *ebcb=-# Write Edge Blending Black Level Blue Increase *ebcb=+# Read Edge Blending Black Level Blue Status *ebcb=?# System Write Standby Settings-Network on (Network Standby) *standbynet=on# Write Standby Settings-Network off (ECO Standby) *standbynet=off# Read Standby Settings-Network Status *standbynet=?# Write Auto Power Off-on (Auto power off) *autopoweroff=on# Write Auto Power Off-off (Auto power off) *autopoweroff=off# Read Auto Power Off-Status *autopoweroff=?# Write Direct Power On-on (Auto Power On ) *directpower=on# Write Direct Power On-off (Auto power off) *directpower=off# Read Direct Power On-Status *directpower=?# Write Set background to Logo *bg=logo# Write Set background to Black *bg=black# Write Set background to Blue *bg=blue# Write Set background to White *bg=white# Read Get background status *bg=?# Write Startup logo off *startlogo=off# Write Startup logo on *startlogo=on# Write Get startup logo status *startlogo=# Write Trigger on *trigger=on# Write Trigger off *trigger=off# Read Trigger status *trigger=?# Write Dynamic black on *db=on# Write Dynamic black off *db=off# English
73 SystemRead Dynamic black status *db=?# Write Factory reset *fact=reset# Write System reset *system=reset# Information Read Get Model Name *modelname=?# Information Read Get Serial Number *sn=?# Read Get F/W Version *swver=?# Read Get Active source *activesour=?# Read Get Pixel clock *pixelclock=?# Read Get Signal format *signal=?# Read Get H refresh rate *hfreq=?# Read Get V refresh rate *vfreq=?# Read Laser Hour *lsrtim=?# Miscellaneous Write Blank On *blank=on# Write Blank Off *blank=off# Read Blank Status *blank=?# Write Freeze On *freeze=on# Write Freeze Off *freeze=off# Read Freeze Status *freeze=?# Write Menu On *menu=on# Write Menu Off *menu=off# Read Menu Status *menu=?# Write Up *up# Write Down *down# Write Right *right# Write Left *left# Write Enter *enter# Read Error Code *error=report# Write Lens Shift Up *lst=up# Write Lens Shift Down *lst=down# Write Lens Shift Left *lst=left# Write Lens Shift Right *lst=right# Write Lens Focus Plus *focus=+# Write Lens Focus Minus *focus=-# Write Lens Zoom Plus *zoom=+# Write Lens Zoom Minus *zoom=-# Note: RS-232 Baud rate: 9600 English
74 Control the projector through network Set up the projector for networking Network ModeProjector Contorl IP Address Subnet Mask Gateway DHCP Apply Off Reset Network Computer 1 MENUExit Picture System Network Display SetupAdvanced SystemInformation Caution: Please set DHCP option to Off and select Apply to activate it. The DHCP service assigns an IP address and settings. The IP address, Subnet Mask and Gateway options will be dimmed and not available for selection. If the LAN does not support DHCP service, please press ▲▼ and Enter key to select network and its settings: IP Address : To specify an IP address, press the Enter button to show the IP address input window. Use the ◄► buttons to select the number in the IP address to be changed. Use the ▲▼ buttons to increase or decrease the number in the IP address. Subnet Mask : Set up the subnet address in the same way as for the IP Address setup. Gateway: Set up the gateway address in the same way as for the IP Address setup. DHCP : Set DHCP to On or Off. If this is set to On, the DHCP server of network domain will assign an IP address to the projector. That is, the IP address will display in the address window instead of having to be manually entered. Otherwise, the domain does not or cannot assign an IP address, and 0. 0. 0. 0 is shown on the IP address window. Apply: Select this button and press Enter. It takes the projector several seconds to execute the change in network setting until the following message disappears. Apply Network Ye s No Please contact your network administrator if the network remains disconnected. English
75 Control the projector through web browser Open a web browser and enter the projector's IP address. Its home page with five options will display: Projector Status: Current projector settings. Projector Control: Control projector via web Crestron RoomView: Crestron compatible network browser control page. Network Setup: Setting option for network connection. Alert Mail Setup: Settings for projector abnormality email reminders. In case of any abnormality the projector sends emails to preset users. Projector status The following illustrates a projector with IP address "192.168.0.100": Model: Model number of the projector Software Version : Version of projector system software Power Status : Current projector power on status Input : Current input signal Diagnostic status : Display projector error messages Network control setup information (RJ-45 Version) LAN Software Version : Version of network control software MAC address : Current IP address English
76 Projector control Choose this function to control the projector via the web. Crestron RoomView Click the Crestron option in your projector’s home page to display its control page in a new tab. Pow e r: Press to power on or off your projector. Source List : Switch among list of available projector input signal sources. Press the ▲ (at top of screen) or ▼ (at bottom of screen) arrow key to scroll through the list. English
77 Image adjust options Press the ◄ (to the left of screen) or ► (to the right of screen) arrow key to scroll through other adjustment options. Freeze : Freeze current projection screen. The projection screen prompts "Freeze" message once the freeze function is enabled. Press the Freeze button again to unfreeze the image. Contrast : Press to display the adjustment window, click ◄► arrow key to adjust contrast. Brightness : Press to display the adjustment window, click ◄► arrow key with the mouse to adjust brightness. Sharpness : Press to display the adjustment window, click ◄► arrow key with the mouse to adjust sharpness. Zoom : Zoom in on the projection image. Click "+" key to zoom in and "-" to zoom out. Click the four arrow keys in the window to move the zoomed projection image. Control key window This window simulates keys on the remote controller and control panel. Enter: Confirm the changes and select the OSD option Menu: Press to display the OSD menu. Press again to exit it. Auto: Execute the auto image adjustment function. Blank: Pause the image projection, i.e. the projection image is masked. Press again to resume the projection. Source: Display list of signal sources. Tools: Set up options to work with Crestron compatible devices. See relevant manuals for detailed setup steps. English
78 Info: Display current projector status and Crestron settings. Network setup Control your projector with following setup. Network control setup information IP Address: Current IP address Subnet Mask : Current subnet setting Gateway : Current gateway setting DNS Server : Current DNS server setting English
79 Alert mail setup The projector can send alert messages with Email to predefined users. Make the following settings. Before enabling this function: SMTP Sever:Set up name of SMTP server for the projector's sending reminder E-mail Port. E-mail Port :Set up transmission port. User Name :Set up user name for the projector's sending reminder email through SMTP server. Password :Set up user password. E-mail Alert :Enable or disable E-mail Alert function. From :Set up sender's email address. To :Set up recipient's email address. CC :Set up CC recipient's email address. Projector Name :Set up projector name or ID. Location :Set up installation location of projector. English
80 Troubleshooting Indicator messages Several indicator messages are used by the projector to alert users about problems with setup or system error. The LEDs on top cover of the projector illustrated below. TEMP LED LED displayProjector status Operation tips Off Normal status Flashing RedOver temperature error Contact with your nearest authorized dealer or service center. LIGHT SOURCE LED LED display Projector status Operation tips Off Light source is off Flashing Green Projector is turning on Red (Cycles of 6) Light source is end-of-life Please call the local service center. On Red Light source problem Please call the local service center. Green Light source is on STATUS LED indicator LED display Projector status Operation tips Close Normal Flashing Red (once) Safety switch error Please check whether the top cover is well assembled or lens is well installed or not. If the problem persists, call the local service center. Red (quadruple) Fan error Call the local service center. Lights up RedSystem error Call the local service center. POWER LED indicator LED display Projector status Operation tips Close AC power turned offCheck AC power source and power on the projector. Flashing Green Ready to power on the projector Wait until the projector starts projecting. Orange The projector is cooling down Lights up Red Standby mode To power on the projector, press the ON key on the remote controller or the Power key on the control panel. Green Projector powered on English