BenQ Projector CH100 User Manual

CH100
Full HD Portable LED Projector
User Manual
CH100_EN.book  Page 1  Wednesday, March 2, 2016  11:54 AM 

2 Table of contents
Table of contents
Important safety 
instructions ...........................3
Overview...............................7
Projector features ..................................... 7
Shipping contents ...................................... 8
Projector exterior view........................... 9
Controls and functions ..........................10
Installation......................... 14
Choosing a location ................................14
Obtaining a preferred projected 
image size...

3 Important safety instructions
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information 
technology equipment. However, to ensure safe use of this product, it is important that you 
follow the instructions mentioned in this manual and marked on the product.
1.Please read this manual before 
you operate your projector. Save 
it for future reference.
2.Do not look straight at the 
projector lens during operation. 
The intense light beam may...

4 Important safety instructions6. Never replace any electronic 
components unless the projector is 
unplugged.
7. Do not place this product on an 
unstable cart, stand, or table. The 
product may fall, sustaining serious 
damage.
8. Do not attempt to disassemble this 
projector. There are dangerous high 
voltages inside which may cause 
death if you should come into 
contact with live parts. Refer 
servicing only to suitably qualified 
professional service personnel.9. Do not block the ventilation...

5 Important safety instructions 11. Do not stand the projector on end 
vertically. Doing so may cause the 
projector to fall over, causing injury 
or resulting in damage to the 
projector.
12. Do not step on the projector or 
place any objects upon it. Besides 
probable physical damage to the 
projector, doing so may result in 
accidents and possible injury.
13. When the projector is under 
operation, you may sense some 
heated air and odor from its 
ventilation grill. It is a normal 
phenomenon and not...

6 Important safety instructions
Ceiling mounting the projector
If you intend to mount your projector on the ceiling, we strongly recommend that you use 
a proper fitting BenQ Projector Mounting Kit and ensure it is securely and safely installed.
If you use a non-BenQ brand projector ceiling mount kit, there is a safety risk that the 
projector may fall from the ceiling due to an improper attachment through the use of the 
wrong gauge or length screws.
You can purchase a BenQ Projector Mounting Kit from...

7 Overview
Overview
Projector features
The projector integrates high-performance optical engine projection and a user-friendly 
design to deliver high reliability and ease of use.
The projector offers the following features.
• Advanced LED light source
Long lasting LED light source provides a longer life span than traditional lamps.
• Optical engine with DLP technologies
Full HD resolution and a bright picture.
• Various useful features
Supports iPhone/iPad, Android devices, multimedia players, and...

8Overview
Shipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these items 
are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those illustrated.
• * The warranty card is only supplied in some specific regions. Please consult your dealer for 
detailed information.
• Pull the tab before using the remote control.
Projector Power cord Quick start guide
Remote...

9 Overview
Projector exterior view
• Do not block the ventilation openings. Blocking the ventilation openings can cause your 
projector to overheat and may cause it to fail.
• Make sure the lens cover is always open when the projector lamp is on.
1. Vent (heated air exhaust)
2. Built-in speakers
3. Vents (cold air intake)
4. Focus ring
5. LED indicator
6. TEMP (Temperature) indicator
7.  POWER button/POWER 
indicator
8. Front IR remote sensor
9. Lens cover
10. Projection lens
11. USB Type-A port
-...

10 Overview
Controls and functions
Projector
For more information, see Indicators on page 61.
1.  POWER button/POWER 
indicator
• Toggles the projector between 
standby mode and on. See 
Starting up the projector on 
page 26 and Shutting down the 
projector on page 28 for details.
• Lights up or flashes when the 
projector is under operation.
2. TEMP (Temperature) indicator
Lights up in red if the projector’s 
temperature becomes too high.
3. LED indicator
Indicates the status of the lamp. 
Lights up or...