BenQ Pb9200 Digital Projector Installations Series Operating Guide

Operating 15
Operating
Selecting An Input Signal
1. Select an input signal. 
■ Using the INPUT dial
Turn the INPUT dial of the projector. Turning 
the dial cycles through the input ports as 
shown below. Select the signal you wish to 
project.
■ Using SEARCH button
Press the SEARCH button of the projector or 
the remote control.
Pressing the button automatically cycles 
through input ports and displays the picture 
of retrieved signal.
memo If no signal is found or the projector 
is unstable to find an...

Operating 16
Selecting The Aspect Ratio
1. Press the Aspect button to toggle between the 
modes for aspect ratio.
■ At a M1-D signal
memo NORMAL keeps the original aspect ratio of 
the input signal.
■ At a RGB signal (not M1-D)
■ At a video signal / no signal
memo At a HDTV signal of 1125i or 750p, only 16:9 can be selected.
Using The Automatic Adjustment Feature
memo The automatic adjustment operation requires approximately 10 seconds. Also, please 
note that it may not function correctly with some...

Operating 17
Adjusting The Picture Position
1. Press the POSITION but-
ton. As illustrated on the 
right, a 
dialog will 
appear on the screen to 
aid you in adjusting the 
position.
2. Use the cursor buttons 
/// to adjust 
the position.
memo When you want to ini-
tialize the position, press the 
RESET button during adjust-
ment.
3. Press the POSITION button again to close the dialog and complete this operation.
memo Even if you dont do anything, the dialog will automatically disappear after a few sec-...

Operating 18
Adjusting The Volume
1. Press the VOLUME button. 
As illustrated on the right, a 
dialog will appear on the 
screen to aid you in adjust-
ing the volume.
2. Use the cursor buttons /
 to adjust the volume.
3. Press the VOLUME button 
again to close the dialog and 
complete this operation.
memo Even if you dont do any-
thing, the dialog will automatically 
disappear after a few seconds.
Muting The Sound
1. Press the MUTE button. As illus-
trated on the right, a dialog will 
appear on the...

Operating 19
Freezing The Screen
1. Press the FREEZE button. As 
illustrated on the right, a dia-
log will appear on the screen, 
and the screen will freeze at 
the current image.
2. Press the FREEZE button 
again to restore the screen to 
normal. 
The icon “||” will 
change to the icon “ 
4 ”.  
And after a couple of sec-
onds, the dialog will be 
closed and the screen will be 
restored to normal.
memo The freezing feature will automatically finish if a remote control’s button that 
changes some display...

Operating 20
Displaying The Child Window
memo This feature called PinP (Picture in Picture) is available only when a RGB signal is 
selected to main screen.
1. Press the PinP button. The child window with a 
picture of a video signal 
will appear.
2. Press the PinP button again to change the size of 
the child window or close the window.
memo You can select the video signal to display in the 
child window, and the position of the child window. 
Please refer to the items “P.INP. INPUT” and “P.INP....

Multifunctional Settings 21
Multifunctional Settings
Using The Menu Functions
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, 
SCREEN, OPTION and NETWORK. Each of these menus is operated using the same meth-
ods. The basic operations of these menus are as follows.
1. Press the MENU 
button. The menu 
will appear on the 
screen.   
2. Use the cursor but-
tons / to select 
a menu, then press 
the   (or the 
ENTER) button to 
progress. The display of the selected menu will...

Multifunctional Settings 22
MAIN Menu
With the MAIN menu, the items shown in the table below can be 
performed. Perform each operation in accordance with the 
instructions in the table below.
Item Description
BRIGHT
Adjust the brightness using the 5 / 6 buttons. : Light   Dark
CONTRASTAdjust the contrast using the 5 / 6 buttons. : Strong   Weak
ASPECT
Select an aspect ratio using the 5 / 6 buttons. :
■ At a M1-D signal
NORMAL 4:3 16:9
The NORMAL keeps the original aspect ratio of the input signal.■ At a...

Multifunctional Settings 23
PICTURE-1 Menu
With the PICTURE-1 menu, the items shown in the table 
below can be performed. Perform each operation in accor-
dance with the instructions in the table below.
(This table is continued to the following page.)
Item Description
GAMMA
Select a gamma mode using the 5 / 6 buttons. :NORMAL  CINEMA  DYNAMIC  CUSTOMSelecting the CUSTOM and then pressing the 4 (or the ENTER) but-
ton calls the CUSTOM menu.
CUSTOM Menu
Select an item using the 5 / 6 buttons, and press...

Multifunctional Settings 24
PICTURE-1 Menu (continued)
Item Description
MY MEMORY
Select a command to load or save using the 5 / 6 buttons, and then 
press the   (or the ENTER) button to perform the function.:
This projector has 4 numbered memories for adjustment data. Per-
forming the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current 
adjustment data on the memory whose number corresponds with 
the command’s number. Performing the LOAD1, LOAD2, LOAD3 or 
LOAD4 loads the data on the memory whose number...