BenQ Pb7210/pb7230/pb7110 Digital Projector Users Manual

							Specifications 37
Supported timing for Video and S-Video inputs
Video modeHorizontal 
Frequency (kHz)Ve r t i c a l  
Frequency (Hz)Pixel Frequency 
(MHz)
NTSC 15.73 60 3.58
PAL 15.63 50 4.43
SECAM 15.63 50 4.25 or 4.41
PAL-M 15.73 60 3.58
PAL-N 15.63 50 3.58
PAL-60 15.73 60 4.43
NTSC4.43 15.73 60 4.43 
						

							Dimensions 38
Dimensions
Unit: mm 
						

							Warranty 39
Warranty
Limited Warranty
BenQ warrants this product against any defects in material and workmanship, under 
normal usage and storage. 
Exclusion to Warranty: The lamps are considered as 
consumable items and are war-
ranted for 90 days or 500 hours, whichever occurs first. Proof of purchase date will be 
required with any warranty claim. In the event this product is found to be defective 
within the warranty period, BenQ’s only obligation and your exclusive remedy shall be 
replacement of any defective parts (labor included). To obtain warranty service, imme-
diately notify the dealer from which you purchased the product of any defects.
Important: The above warranty shall be void if the customer fails to operate the prod-
uct in accordance with BenQ’s written instructions. This warranty gives you specific 
legal rights, and you may have other rights which vary from country to country.
For other information, please refer to BenQ Warranty Information Book. 
						

							Safety Regulations 40
Safety Regulations
FCC Statement
CLASS A: This equipment generates, uses and can radiate radio frequency energy, and 
if not installed and used in accordance with the instruction manual, may cause interfer-
ence to radio communications. It has been tested and found to comply with the limits 
for a Class “A” computing device pursuant to Subpart B of Part 15 of the FCC Rules, 
which are designed to provide reasonable protection against such interference when 
operated in a commercial environment. Operation of this equipment in a residential 
area is likely to cause interference, in which case the user at his/her own expense will be 
required to take whatever measures may be required to correct the interference.
CLASS B: This equipment generates, uses and can radiate radio frequency energy and, 
if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:
— Reorient or relocate the receiving antenna.
— Increase the distance between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
EEC Statement
This machine was tested against the 89/336/EEC (European Economic Community) 
for EMC (Electro Magnetic Compatibility) and fulfills these requirements.
MIC Statement
A class equipment (Business purpose info/telecommunications equipment)
As this equipment has undergone EMC registration for business purpose, the seller and/or 
the buyer is asked to beware of this point and in case a wrongful sale or purchase has been 
made, it is asked that a change to household use be made.
B class equipment (Household purpose info/telecommunications equipment)
As this equipment has undergone EMC registration for household purpose, this product can 
be used in any area including residential area.