BenQ Pb7200/pb7220/pb7100 Users Manual

Introduction
7 BenQ PB7200/ PB7220/ PB7100 User’s Manual
Remote Control Effective Range
The remote sensors are located on the front and the back of the projector. It can 
function in a range of 30 degrees horizontally and 30 degrees vertically relative to a line 
that is a right angle to the remote sensors. The distance between the remote control 
and the remote sensors must be shorter than 6 meters (19.5 feet).  
Installing or Replacing Batteries
Caution
Avoid excessive heat and humidity. There may be...

Installation 8 BenQ PB7200/ PB7220/ PB7100 User’s Manual
INSTALLATION
Screen Size
Place the projector at the required distance from the screen according to the desired 
picture size (see the table below).    
 PB7200/ PB7220 (XGA) screen size chart  
Distance 
from screenDiagonal measurementDistance from 
screenDiagonal measurementMinimum 
zoomMaximum 
zoomMinimum 
zoomMaximum 
zoom
feetinchesfeetinchesfeet inchesmeterscmmeterscmmeterscm
4 48 2.49 29.9 3.05 36.6 1 100 0.62 62.2 0.76 76.2
6 72 3.73 44.8...

Installation
9 BenQ PB7200/ PB7220/ PB7100 User’s Manual
 PB7100 (SVGA) screen size chart  
Connecting to Various Equipment
HDTV Equipment
The projector is capable of displaying various High Definition TV display modes. Some 
of these sources are:  
Most of these sources will provide an analog component video output, a standard VGA 
output, or a YP
bPr (default) format. 
The projector is capable of accepting HDTV data through a YP
bPr connector. Use a 
HDTV cable that came with your projector to display...

Installation 10 BenQ PB7200/ PB7220/ PB7100 User’s Manual
Connecting to Various Equipment 
It only takes a few seconds to connect your projector to your desktop or notebook 
computer, VCR, or other systems. However, a Mac adapter (an optional accessory) is 
needed for connection to Macintosh computers.    
1. Notebook/ Computer (Macintosh computer or SOG signal is only supported with 
RGB IN-1.)   
The USB cable is not needed unless you have a remote control with mouse 
functions.
2. DVD player or HDTV...

Installation
11 BenQ PB7200/ PB7220/ PB7100 User’s Manual
4. Video device or VCR  

Operation 12 BenQ PB7200/ PB7220/ PB7100 User’s Manual
OPERATION
Start Up
1. Plug the power cord into the projector and into a wall socket. 
2. Turn on the main power switch. 
3. Press and hold POWER to start the unit. The back-lit POWER key flashes green 
and stays green when the power is turned on.
(When the power is turned off, there is a 90-second cooling period before the 
projector can be re-started.)
4. Switch on all connected equipment.
        Remote Control
Projector 

Operation
13 BenQ PB7200/ PB7220/ PB7100 User’s Manual
Digital Keystone Correction
Keystoning refers to the situation where the projected image is noticeably wider at 
either the top or bottom. To correct this, press 3 Left/ Right 4 (hot key) on the 
control panel of the projector or KEYSTONE 3/4 on the remote control, and then 
adjust the sliding bar labeled Keystone, as needed. Press + to correct keystoning at the 
top of the image. Press - to correct keystoning at the bottom of the image.
Auto...

Operation 14 BenQ PB7200/ PB7220/ PB7100 User’s Manual
Source Selection
When several input sources are available, press the SOURCE key to make a selection 
from the control panel of the projector or the remote control.  
Blank
Uses Blank to hide the screen image. You can unseal the image gradually by using the 
mouse of the remote control, or simply press Blank to turn on the image immediately.
ProjectorRemote control
ProjectorRemote control 

Operation
15 BenQ PB7200/ PB7220/ PB7100 User’s Manual
Menu System
Press Menu for the main menu, and then press 3or 4 to select a sub-menu. Press 
Menu again to select items in the sub-menu.  
Menu Bar
Sub-menu Display Image Source Control PIP
PCKe y s t o n e
Brightness
Contrast
Phase
H SizeAuto Resize
H Position
V Position
Color Temp
InformationMirror
Source Scan
Vo l u m e
MuteLanguage
OSD
Setup
Economic 
Mode
Reset
Lamp HourMain page:
PIP Source
PIP Size
PIP Pos.
H Position
V Position
More Options...

Operation 16 BenQ PB7200/ PB7220/ PB7100 User’s Manual
1. Display Menu    
FUNCTIONDESCRIPTION
Key s t o n eCorrects any keystoning of the image. 
BrightnessAdjusts the brightness of the image.  
ContrastAdjusts the degree of difference between dark and light in the 
image.   
PhaseAdjusts to avoid the occurrence of flicker.
*This function is not available when the input mode is Video or S-
Video. 
H SizeAdjusts to fit in the desired image size. *This function is not available when the input mode is...