BenQ Pb2220/Pb2120 Dlp Projector Users Guide

							Specifications27 BenQ PB2220/ PB2120 User’s Guide
Timing Chart
RESOLUTION H SYNC (KHZ) V SYNC (HZ) REMARK
640x350 31.5 70.1
640x400 37.9 85.1 VESA
720x400 31.5 70.0
720x400 37.9 85.1 VESA
640x480 31.5 60.0 VESA
640x480 37.9 72.8 VESA
640x480 35.0 66.7 Macintosh
640x480 43.3 85.0 VESA
800x600 35.2 56.3 VESA
800x600 37.9 60.3 VESA
800x600 46.9 75.0 VESA
800x600 48.1 72.2 VESA
800x600 53.7 85.1 VESA
832x624 49.7 74.5 Macintosh
1024x768 48.4 60.0 VESA
1024x768 56.5 70.1 VESA
1024x768 60.0 75.0 VESA
1024x768 68.7 85.0 VESA
1280x1024 64.0 60.0 VESA 
						

							Dimensions 28 BenQ PB2220/ PB2120 User’s Guide
DIMENSIONS 
220mm
175mm
  52mm 
						

							Wa r r a n t y29 BenQ PB2220/ PB2120 User’s Guide
WA R R A N T Y
Limited Warranty
BENQ warrants this product against any defects in material and workmanship, under 
normal usage and storage. 
Exclusion to Warranty: The lamps are considered a consumable item and are war-
ranted for 90 days or 500 hours, whichever occurs first. Proof of purchase date will be 
required with any warranty claim. In the event this product is found to be defective 
within the warranty period, BENQ’s only obligation and your exclusive remedy shall be 
replacement of any defective parts (labor included). To obtain warranty service, imme-
diately notify the dealer from which you purchased the product of any defects.
Important: The above warranty shall be void if the customer fails to operate the prod-
uct in accordance with BENQ’s written instructions. This warranty gives you specific 
legal rights, and you may have other rights which vary from country to country.
For more detailed information, please refer to BenQ Warranty Information Book. 
						

							Safety Regulations 30 BenQ PB2220/ PB2120 User’s Guide
SAFETY REGULATIONS
FCC Statement
CLASS A: This equipment generates, uses and can radiate radio frequency energy, and 
if not installed and used in accordance with the instruction manual, may cause interfer-
ence to radio communications. It has been tested and found to comply with the limits 
for a Class “A” computing device pursuant to Subpart B of Part 15 of the FCC Rules, 
which are designed to provide reasonable protection against such interference when 
operated in a commercial environment. Operation of this equipment in a residential area 
is likely to cause interference, in which case the user at his/her own expense will be 
required to take whatever measures may be required to correct the interference. 
CLASS B: This equipment generates, uses and can radiate radio frequency energy and, 
if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of the fol-
lowing measures:
— Reorient or relocate the receiving antenna.
— Increase the distance between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
EEC Statement
This machine was tested against the 89/336/EEC (European Economic Community) for 
EMC (Electro Magnetic Compatibility) and fulfills these requirements.