BenQ Mx661 Users Manual

Operation 51 The Information page displays the information and status of this projector.
The Conference Control page allows you to control computer’s display status of all the 
computers linked to this projector.
The Crestron page is only available when you are  on a Wired LAN network. It also allows 
you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9.
Downloaded From projector-manual.com BenQ Manuals 

Operation
52i. These buttons function the same as the ones on the OSD menus or remote 
control. See 2. PICTURE on page 71 and Remote control on page 14 for 
details.
The Menu button can also be used to go back to previous OSD menu, exit and save menu 
settings.
ii. To switch input source, click on your desired signal.
i
i
i
ii
Downloaded From projector-manual.com BenQ Manuals 

Operation 53 The tools page allows you to manage the projector, configure the LAN control settings and 
secure access of remote network operation on this projector.
i. You can name the projector, keep track of its location and the person in charge 
of it.
ii. You can adjust the Wired LAN settings.
iii. Once set, access to the remote network operation on this projector has been 
password-protected.
iv. Once set, access to the tools page has been password-protected.
After making the adjusents, press the...

Operation
54The info page displays the information and status of this projector.
i. Press exit to go back to the Crestron remote network operation page.
The Admin page allows you to enter Basic, Wired LAN, Wireless LAN and Mail pages 
once the password is entered. The default password is “0000”. If you want to change the 
password, please enter Basic page.
i
Downloaded From projector-manual.com BenQ Manuals 

Operation 55 The Basic page allows you to change the password and select connected persons. The 
number of connected persons may affect the network display performance.
The Wired LAN page allows you to adjust the Wired LAN settings.
Downloaded From projector-manual.com BenQ Manuals 

Operation
56The Mail page allows you to send alert e-mail to your ITS administrator.
You can first try the Mail Test function to check if the Alert Mail works.
Downloaded From projector-manual.com BenQ Manuals 

Operation 57
Displaying image through Q Presenter
The Q Presenter is an application running on the host PC. It connects to an available 
network display and transfers the desktop contents to the network display via local 
network connection.
Be sure to turn off other virtual network control programs before using Q Presenter.
1. Connect the projector with the RJ45 cable, and make sure your laptop or computer 
also link to the LAN. See Wired connection on page 46 and Wireless connection 
on page 47 for...

Operation
58i. You can key in the IP address (see Controlling the projector remotely through a 
web browser on page 48 for details.) to connect the network directly or click 
“Search” to find the search results.
ii.  You can activate audio streaming. MAC version is by keypad.
iii. Choose the IP address and click “Connect”. Then you should be able to see the 
image on projector.
The Feature page allows you to manage the display image on your projector.MAC version
Windows version
i
ii
iii
Downloaded From...

Operation 59 i. You can choose mirror or extension diplay your contents.
ii. You can select to Play/Pause displaying desktop contents to connected network 
display.
iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click 
the location you want to display. 4 locations can be chosen (1-4) or 2 places (L 
and R) if it’s 2 computers. Once you click the place you want to display, the image 
appers on th eprojector. You can change the location anytime you want, even 
back to full...

Operation
60i. You can select Video or Graphic display mode. Graphic Mode: worse image 
quality but faster tramsmission speed. Video Mode: better image quality but 
slower transmission speed. However, the actual transmission performance was 
determined by the status of network usage at that time.
ii. You can select whether to activate compatible mode.
iii.  You can select whether to automatically open the Q Presenter application when 
the computer is powered on.
iv. When you install the Q Presenter, the...