BenQ Ms616st/mx618st Digital Projector User Manual
Here you can view all the pages of manual BenQ Ms616st/mx618st Digital Projector User Manual. The BenQ manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
Maintenance 51 Indicators LightStatus & Description Powe r ev e n t s Orange Off OffStand-by mode. Green Flashing Off OffPowering up. Green Off OffNormal operation. Orange Flashing Off OffNormal power-down cooling Lamp events Off Off RedLamp error in normal operation Orange Flashing Off RedLamp is not lit up Thermal events Off Red Off Fan 1 error (the actual fan speed is +25% outside the desired speed) Off Red RedFan 2 error (the actual fan speed is +25% outside the desired speed) Off Red GreenFan 3...
Page 52
Troubleshooting 52 Troubleshooting The projector does not turn on. No picture Blurred image Remote control does not work The password is incorrect CauseRemedy There is no power from the power cord. Plug the power cord into the AC power jack on the projector, and plug the power cord into the power outlet. If the power outlet has a switch, make sure that it is switched on. Attempting to turn the projector on again during the cooling process. Wait until the cooling down process has completed....
Page 53
Specifications 53 Specifications Projector specifications All specifications are subject to change without notice. Optical Resolution800 x 600 SVGA (MS616ST) 1024 x 768 XGA (MX618ST) Display system 1-CHIP DMD Lens F/Number F = 2.6 ~ 2.78, f = 10.2 ~ 12.24 mm Lamp 190 W lamp (MS616ST) 210 W lamp (MX618ST) Electrical Power supplyAC100–240V, 3.2 A, 50-60 Hz (Automatic) (MS616ST) AC100–240V, 3.5 A, 50-60 Hz (Automatic) (MX618ST) Power consumption 275 W (Max); < 0.5 W (Standby) (MS616ST) 295 W (Max); <...
Page 54
Specifications 54 Dimensions 312 mm (W) x 104 mm (H) x 244 mm (D) Ceiling mount installation 312 244 104 5158 Ceiling Mount screw: M4 x 8 (Max L = 8 mm) Unit: mm
Page 55
Specifications 55 Timing chart Supported timing for PC input • *Supported timing for 3D signal with Frame Sequential, and Top Bottom format. **Supported timing fo r 3D signal with Frame Sequential format. ***Supported timing for 3D signal with Top Bottom format. ResolutionMode Ve r t i c a l Frequency (Hz)Horizontal Frequency (kHz)Pixel Frequency (MHz) 640 x 480 VGA_60 59.940 31.469 25.175 VGA_72 72.809 37.861 31.500 VGA_75 75.000 37.500 31.500 VGA_85 85.008 43.269 36.000 720 x 400 720 x 400_70...
Page 56
Specifications 56 • The timings showing above may not be supported due to EDID file and VGA graphic card limitations. It is possible that some timings cannot be chosen. Supported timing for HDMI (HDCP) input • *Supported timing for 3D signal with Frame Sequential, and Top Bottom format. **Supported timing fo r 3D signal with Frame Sequential format. ***Supported timing for 3D signal with Top Bottom format. ResolutionModeVe r t i c a l Frequency (Hz)Horizontal Frequency (kHz)Pixel Frequency...
Page 57
Specifications 57 • The timings showing above may not be supported due to EDID file and VGA graphic card limitations. It is possible that some timings cannot be chosen. *Supported timing for 3D signal with Frame Sequential format. Supported timing for Component-YPbPr input • *Supported timing for 3D signal with Frame Sequential format. • Displaying a 1080i(1125i)@ 60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs *Supported timing...
Page 58
Warranty and Copyright information 58 Warranty and Copyright information Limited warranty BenQ warrants this product against any de fects in material and workmanship, under normal usage and storage. Proof of purchase date will be required with an y warranty claim. In the event this product is found to be defective within the warran ty period, BenQs only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify...