BenQ Ms521p Users Manual

Specifications 51
Specifications
Projector specifications
All specifications are subject to change without notice.
Optical
Resolution
(MS512H/MS521P/TS537)
800 x 600 SVGA
(MX522P/TX538)
1024 x 768 XGA
Display system
1-CHIP DMD
Lens F/Number
F = 2.56 ~ 2.8, f = 21 ~ 23.1 mm
Lamp
190 W lamp
Electrical
Power supply
AC100–240V, 2.7 A, 50-60 Hz 
(Automatic)
Power consumption
280 W (Max); < 0.5 W (Standby)
Mechanical
Weight
1.9 Kg (4.19 lbs)
Output terminals
RGB output
D-Sub 15-pin (female) x 1
Speaker...

Specifications 52
Dimensions
283 mm (W) x 95 mm (H) x 222 mm (D)
Ceiling mount installation
283
222
95
Unit: mm 59.554.46
59.5
54.46
207.54
71.75
201.55
71.654.93
105.77
625.86
128.9 81.9
577.7
537.9
44.94
104.42
225.4
Ceiling Mount screw: M4
(Max L = 25 mm; Min L = 20 mm)
Unit: mm
Downloaded From projector-manual.com BenQ Manuals 

Specifications 53
Timing chart
Supported timing for PC input
•  *Supported timing for 3D signal in Frame Sequential, Top Bottom and Side by Side formats.
**Supported timing for 3D signal in Frame Sequential format.
***Supported timing for 3D signal in Top Bottom and Side by Side formats.
ResolutionMode
Ve r t i c a l  
Frequency 
(Hz)Horizontal 
Frequency 
(kHz)Pixel 
Frequency
(MHz)
640 x 480VGA_60* 59.940 31.469 25.175
VGA_72 72.809 37.861 31.500
VGA_75 75.000 37.500 31.500
VGA_85 85.008 43.269 36.000...

Specifications 54
•  The timings showing above may not be supported due to EDID file and VGA graphic card limitations. It is 
possible that some timings cannot be chosen.
Supported timing for HDMI (HDCP) input
•  *Supported timing for 3D signal in Frame Sequential, Top Bottom and Side by Side formats.
**Supported timing for 3D signal in Frame Sequential format.
***Supported timing for 3D signal in Top Bottom and Side by Side formats.
•  The timings showing above may not be supported due to EDID file and...

Specifications 55
*Supported timing for 3D signal in Frame Sequential format.
**Supported timing for 3D signal in Frame Packing, Top Bottom and Side by Side formats.
***Supported timing for 3D signal in Frame Sequential, Frame Packing, Top Bottom and Side by Side 
formats.
****Supported timing for 3D signal in Side by Side format.
*****Supported timing for 3D signal in Top Bottom format.
Supported timing for Component-YPbPr input
•  *Supported timing for 3D signal in Frame Sequential format.
•...

Warranty and Copyright information 56
Warranty and Copyright information
Limited warranty
BenQ warrants this product against any defects in material and workmanship, under 
normal usage and storage.
Proof of purchase date will be required with any warranty claim. In the event this product 
is found to be defective within the warranty period, BenQs only obligation and your 
exclusive remedy shall be replacement of any defective parts (labor included). To obtain 
warranty service, immediately notify the...