BenQ Ms510/mx511 Digital Projector User Manual

Operation 41
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between 1500 m 
–3000 m above sea level, and ambient temperature is between 0°C–35°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient 
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode 
on under such a condition.
To activate the High Altitude Mode:
1. Press Menu/Exit and then press  /  until the...

Operation 42
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The 
following settings do not affect the projection settings, operation, or performance. 
•Menu display time in the SYSTEM SETUP: Basic > Menu Settings menu sets the length 
of time the OSD will remain active after your last key press. The time length ranges from 
5 to 30 seconds in 5-second increments. Use  /  to select a suitable time frame.
•Menu position in the SYSTEM...

Operation 43
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Keystone
Position
Phase
H. Size
Digital Zoom
3D Sync On/Off
3D Sync InvertDisable/Invert
Teaching 
Te m p l a t eBlackboardLetter Formation/Musical Staff/
Worksheet/Coordinate Chart
WhiteboardLetter Formation/Musical Staff/...

Operation 44
4. 
SYSTEM 
SETUP: 
Basic
Presentation 
TimerTimer period1~240 minutes
Timer displayAlways/Last 1 min/Last 2 min/
Last 3 min/Never
Timer positionTop-Left/Bottom-Left/Top-
Right/Bottom-Right
Timer counting 
directionCount Down/Count Up
On/Off
Language
Projector PositionFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Menu SettingsMenu display 
time5 sec/10 sec/15 sec/20 sec/25 
sec/30 sec
Menu positionCenter/Top-left/Top-right/Bottom-
right/Bottom-left
Reminder 
messageOn/Off
Operation...

Operation 45 Note that the menu items are available when the projector detects at least one valid signal. If 
there is no equipment connected to the projector or no signal detected, limited menu items 
are accessible.
5. 
SYSTEM 
SETUP: 
Advanced
Quick Cooling On/Off
High Altitude Mode On/Off
Audio SettingsMute On/Off
Volume
Lamp SettingsLamp mode Normal/Economic
Reset lamp timer
Equivalent lamp hour
Security 
SettingsChange password
Change Security 
SettingsPower on lock
Splash Screen on Lock
Baud...

Operation 46
Description of each menu
• The default values listed in this manual, especially on pages 46-54, are for reference only. 
They may vary between the projectors due to the continuous improvement to the  
products.
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Wall ColorCorrects the projected picture’s color when the projection surface is 
not white. See Using Wall Color on page 35 for details.
Aspect RatioThere are four options to set the images aspect ratio depending on...

Operation 47
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
3D Sync
This projector features a 3D function which enables you to enjoy the 
3D movies, videos, and sporting events in a more realistic way by 
presenting the depth of the images. You need to wear a pair of 3D 
glasses to view the 3D images.
• For a PC type signal:
When the vertical frequency is 120Hz, and the content being projected 
is made with 3D technology, selecting On will present the 3D images.
When the input...

Operation 48
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Picture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See Selecting a 
picture mode on page 34 for details.
Reference 
Mode
Selects a picture mode that best suits your need for the image quality 
and further fine-tune the image based on the selections listed on the 
same page below. See Setting the User 1/User 2 mode on page 34 for 
details.
This...

Operation 49
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Brilliant Color
Adjusts white peaking while maintaining correct color presentation. 
See Adjusting Brilliant Color on page 35 for details.
This function is only available when User 1/2 is selected.
Color 
TemperatureSee Selecting a Color Temperature on page 35 for details.
This function is only available when User 1/2 is selected.
3D Color 
ManagementSee 3D Color Management on page 36 for details.
This function is only...

Operation 50
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Presentation 
Timer
Reminds the presenter to finish the presentation within a certain time 
frame. See Setting the presentation timer on page 38 for details.
Timer period
Sets a preferred length of time for presentation.
Timer display
Sets whether to display the timer on screen.
Timer position
Sets the position where the timer displays on screen.
Timer counting direction
Sets the timer counting direction.
LanguageSets the...