BenQ Mp724/mp727/mp735 Digital Projector User Manual

Operation 41
EnglishAdjusting Color
Highlight Color in the  PICTURE  menu and adjust the values by pressing  /  on the 
projector or remote control.
Lower setting produces less saturated colors. If  the setting is too high, colors on the image 
will be overpowering, which makes the image unrealistic.
Adjusting Tint
Highlight  Tint in the  PICTURE  menu and adjust the values by pressing  /  on the 
projector or remote control.
The higher the value, the more reddish the pict ure becomes. The lower the...

Operation
42
English3D Color Management
In most installation situations, color manage ment will not be necessary, such as in 
classroom, meeting room, or l ounge room situations where lights remain on, or where 
building external windows allo w daylight into the room. 
Only in permanent installations with controlled  lighting levels such as boardrooms, lecture 
theaters, or home theaters, should color management be considered. Color management 
provides fine color control adjustment to allo w for more...

Operation 43
EnglishSetting the presentation timer
The presentation timer can indicate the presentation 
time on the screen to help you achieve better time 
management when giving presentations. Follow these 
steps to utilize this function:
1. Go to the  SYSTEM SETUP: Basic > 
Presentation Timer  menu and press MODE/
ENTER  to display the  Presentation Timer  
page.
2. Press  to highlight  Timer period and decide the timer period by pressing  / . 
The length of time can be set from 1 to 5 mi nutes in...

Operation
44
English3. Highlight  Yes and press  MODE/ENTER  to confirm. You will see the message 
“ Timer is Off ” displaying on the screen.
Remote paging operations
Hiding the image
In order to draw the audiences full attention to 
the presenter, you can use  BLANK on the 
projector or remote control to hide the screen 
image. Press any key on the projector or remote 
control to restore the image.  The word 
 BLANK  appears at the lower right corner of 
the screen while the image is hidden.
You can set...

Operation 45
EnglishLocking control keys
With the control keys on the projector locked, you can prevent your projector settings from 
being changed accidentally (by ch ildren, for example). When the Panel Key Lock  is on, no 
control keys on the projector will operate except  POWER.
1. Press  / on the projector or go to the 
SYSTEM 
SETUP: Basic > Panel Key Lock  menu
, and select 
On  by pressing  /  on the pr ojector or remote 
control. 
2. A confirmation message displays. Select  Yes to 
confirm.
To...

Operation
46
EnglishOperating in a high altitude environment
We recommend you use the  High Altitude Mode when your environment is between 
1500 m –3000 m above sea level, and temperature is between 5°C–23°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature 
is between 5°C and 28°C. The projector will be  over cooled, if you turn the mode on under 
such a condition.
To activate the  High Altitude Mode :
1. Press  MENU/EXIT  and then press  /  
until the  SYSTEM...

Operation 47
EnglishAdjusting the sound
The sound adjustments made as below will have an effect on the projector speakers. Be sure 
you have made a correct connection to the projector audio input. See Connection on page 
20 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound,
• Using the remote control
Press  MUTE  to temporarily turn off the sound. While the sound is off, 
the screen will display    in the upper right corner of the screen.
To restore the sound, press...

Operation
48
EnglishPersonalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The 
following settings do not aff ect the projection settings, operation, or performance. 
• Menu display time  in the SYSTEM SETUP: Advanced  > Menu Settings  menu sets 
the length of time the OSD will remain activ e after your last key press. The time length 
ranges from 5 to 30 seconds in 5-second incr ements. Use  /  to select a suitable time 
frame.
• Menu...

Operation 49
EnglishMenu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff
/Light Yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9
Keystone
Position
Phase
H. Size
Digital Zoom
2. 
PICTURE
Picture Mode PC source:
 Dynamic/Presentation/sRGB/Cinema/
User 1/User 2
Video source:  Dynamic/Standard/Cinema/User 1/
User 2
Reference Mode PC source:...

Operation
50
English
6. 
INFORMATI
ON
FAQ-Image and Installation
FAQ-Features and Service
Current System Status •
Source
• Picture Mode
• Resolution
• Color System
• Equivalent Lamp Hour
4. 
SYSTEM 
SETUP: 
Basic
Presentation 
Timer Timer period
1~240 minutes
Timer display Always /1 min/2 min/3 min/Never
Timer position Top-Left
/Bottom-Left/Top-Right/
Bottom-Right
Timer counting 
direction Count Down
/Count Up
Sound reminder On/Off
On /Off
Language
Projector Position Front Table
/Rear Table/
Rear...