Home > BenQ > Projector > BenQ Mp723 Digital Projector User Manual

BenQ Mp723 Digital Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual BenQ Mp723 Digital Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Specifications 61
    Specifications
    Projector specifications
    All specifications are subject to change without notice.
    Optical
    Resolution
     1024 x 768 XGA
    Display system
    1-CHIP DMD
    Lens F/Number
    F=2.4 to 2.48, f= 20.7 to 22.8 mm
    Lamp
    280 W lamp
    Electrical
    Power supply
    AC100–240V, 4.5A, 50-60 Hz (Automatic)
    Power consumption
    365 W (Max); 5 W (Standby)
    Mechanical
    We i g h t
    7.7 lbs (3.5 Kg)
    Output terminals
    RGB output
    D-Sub 15-pin (female) x 1
    Speaker
    (Stereo) 2 watt x 1
    12VDC (Max. 1A)
    Control
    USB serial control
    Ty p e  m i n i  B
    RS-232 serial control
    Mini Din 8 pin x 1
    Input terminals
    Computer input
    RGB input
    D-Sub 15-pin (female) x 1
    DVI-I input
    Video signal input
    S-VIDEO
    Mini DIN 4-pin port x 1
    VIDEO
    RCA jack x 1
    SD/HDTV signal input
    Analog - Component RCA jack x 3
    (through RGB input)
    Digital - DVI (supports HDCP)
    Audio signal input
    Audio in
    PC audio jack
    Environmental Requirements
    Operating temperature
    0°C–40°C at sea level
    Operating relative humidity
    10%–90% (without condensation)
    Operating altitude
    0–1499 m at 0°C–35°C
    1500–3000 m at 0°C–30°C (with 
    High Altitude Mode on) 
    						
    							Specifications 62
    Dimensions
    274.87 mm (W) x 131.30 mm (H) x 304.99 mm (D)
    274.87
    304.99131.30
    48.5774.30 
    						
    							Specifications 63
    Timing chart
    Supported timing for PC (including DVI-D) input
    Supported timing for Component-YP
    bPr input
    ResolutionHorizontal 
    Frequency 
    (kHz)Ve r t i c a l  
    Frequency 
    (Hz)Pixel 
    Frequency 
    (MHz)Mode
    640 x 48031.469 59.940 25.175 VGA_60
    37.861 72.809 31.500 VGA_72
    37.500 75.000 31.500 VGA_75
    43.269 85.008 36.000 VGA_85
    720 x 400 31.469 70.087 28.3221 720 x 400_70
    800 x 60037.879 60.317 40.000 SVGA_60
    48.077 72.188 50.000 SVGA_72
    46.875 75.000 49.500 SVGA_75
    53.674 85.061 56.250 SVGA_85
    1024 x 76848.363 60.004 65.000 XGA_60
    56.476 70.069 75.000 XGA_70
    60.023 75.029 78.750 XGA_75
    68.667 84.997 94.500 XGA_85
    1280 x 768 47.77 60.09 80.768 SXGA_60
    1280 x 800 49.65 59.96 83.458 SXGA_60
    1280 x 1024 63.981 60.020 108.000 SXGA_60
    VIDEO
    (HDCP)
    15.7560
    13.51480i
    31.4760
    27480p
    31.25 50 27.000 576p
    37.50 50
    74.25720p_50
    45.00 60
    74.25720p_60
    33.7560
    74.251035i
    67.560
    148.51035p
    28.13 50
    74.251080i_50
    33.75 60
    74.251080i_60
    67.560
    148.51080p
    Signal FormatHorizontal 
    Frequency (kHz)Vertical Frequency 
    (Hz)
    480i(525i)@60Hz 15.73 59.94
    480p(525p)@60Hz 31.47 59.94
    576i(625i)@50Hz 15.63 50.00
    576p(625p)@50Hz 31.25 50.00
    720p(750p)@60Hz 45.00 60.00
    720p(750p)@50Hz 37.50 50.00
    1080i(1125i)@60Hz 33.75 60.00
    1080i(1125i)@50Hz 28.13 50.00 
    						
    							Specifications 64
    Supported timing for Video and S-Video inputs
    Video modeHorizontal 
    Frequency 
    (kHz)Ve r t i c a l  
    Frequency 
    (Hz)Color sub-
    carrier 
    Frequency 
    (MHz)
    NTSC 15.73 60 3.58
    PAL 15.63 50 4.43
    SECAM 15.63 50 4.25 or 4.41
    PAL-M 15.73 60 3.58
    PAL-N 15.63 50 3.58
    PAL-60 15.73 60 4.43
    NTSC4.43 15.73 60 4.43 
    						
    							Warranty and Copyright information 65
    Warranty and Copyright information
    Limited warranty
    BenQ warrants this product against any defects in material and workmanship, under normal 
    usage and storage. 
    Proof of purchase date will be required with any warranty claim. In the event this product is 
    found to be defective within the warranty period, BenQs only obligation and your exclusive 
    remedy shall be replacement of any defective parts (labor included). To obtain warranty 
    service, immediately notify the dealer from which you purchased the product of any defects.
    Important: The above warranty shall be void if the customer fails to operate the product in 
    accordance with BenQs written instructions, especially the ambient humidity must be in-
    between 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 
    feet, and avoiding to operate the projector in a dusty environment. This warranty gives you 
    specific legal rights, and you may have other rights which vary from country to country.
    For other information, please visit www.BenQ.com.
    Copyright
    Copyright 2007 by BenQ Corporation. All rights reserved. No part of this publication may 
    be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any 
    language or computer language, in any form or by any means, electronic, mechanical, 
    magnetic, optical, chemical, manual or otherwise, without the prior written permission of 
    BenQ Corporation.
    Disclaimer
    BenQ Corporation makes no representations or warranties, either expressed or implied, 
    with respect to the contents hereof and specifically disclaims any warranties, merchantability 
    or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise 
    this publication and to make changes from time to time in the contents hereof without 
    obligation to notify any person of such revision or changes.
    *DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others 
    are copyrights of their respective companies or organizations. 
    						
    							Regulation statements 66
    Regulation statements
    FCC statement
    CLASS B: This equipment generates, uses and can radiate radio frequency energy and, if not 
    installed and used in accordance with the instructions, may cause harmful interference to 
    radio communications. However, there is no guarantee that interference will not occur in a 
    particular installation. If this equipment does cause harmful interference to radio or 
    television reception, which can be determined by turning the equipment off and on, the user 
    is encouraged to try to correct the interference by one or more of the following measures:
    — Reorient or relocate the receiving antenna.
    — Increase the distance between the equipment and receiver.
    — Connect the equipment into an outlet on a circuit different from that to which the 
    receiver is connected.
    — Consult the dealer or an experienced radio/TV technician for help.
    EEC statement
    This machine was tested against the 89/336/EEC (European Economic Community) for 
    EMC (Electronic Magnetic Compatibility) and fulfills these requirements.
    WEEE directive
    Disposal of Waste Electrical and Electronic Equipment by users in private households in the 
    European Union.
    This symbol on the product or on the packaging indicates that this can not 
    be disposed of as household waste. You must dispose of your waste 
    equipment by handling it over to the applicable take-back scheme for the 
    recycling of electrical and electronic equipment. For more information 
    about recycling of this equipment, please contact your city office, the shop 
    where you purchased the equipment or your household waste disposal 
    service. The recycling of materials will help to conserve natural resources 
    and ensure that it is recycled in a manner that protects human health and 
    environment.
       
    						
    All BenQ manuals Comments (0)

    Related Manuals for BenQ Mp723 Digital Projector User Manual