BenQ Mp721 Users Manual

Operation 37
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
*When a Video or S-Video signal is connected, the function is only available with NTSC 
system selected.
Functions available when receiving different signal types...
Sub-MenuPCVideo / S-VideoComponent Video 
Picture
Picture Mode
Color Temp
Brightness
ContrastPicture Mode
Color Temp
Brightness
Contrast
Color
Tint*
Sharpness
Pro-Picture
Keystone
Auto Resize
Aspect Ratio
H...

Operation 38
Using the menus
The projector is equipped with on-screen display (OSD) menus for making various 
adjustments and settings.
There are 17 different menu languages. (Refer to page Advanced menu on page 43 for 
more details.)
The following example describes the adjustment of the keystone.
1. Press MENU6 on the projector or 
MENU on the remote control to turn 
the on-screen menu on.4. Adjust keystone values by 
pressing Left 3/Right 4on the 
projector or Left 3/Right 4 on 
the remote control.
2....

Operation 39
Picture menu
Some picture adjustments are available only when certain input sources are in use. 
Unavailable adjustments are not shown on the screen.
FUNCTION 
(default setting 
/ value)
DESCRIPTION
Picture Mode
(PC: 
Dynamic;
YPbPr/ S-
Video/ Video: 
Standard)Pre-defined application modes are provided so you can optimize your 
projector image set-up to suit your program type.
You can use the remote control Mode button to select a predefined 
application mode. See Selecting a picture mode on...

Operation 40
Color 
(depends on 
the selected 
input source)Increases or decreases the color intensity of the image.
Tint (50)
Adjusts the color tones of the image. The higher the value, the more 
reddish the image becomes. The lower the value, the more greenish the 
image becomes.
When a Video or S-Video signal is connected, the function is only 
available with NTSC system selected.
Sharpness 
(15)Adjusts the image to make it look sharper or softer.
Downloaded From projector-manual.com BenQ Manuals 

Operation 41
Pro-Picture menu
Some picture adjustments are available only when certain input sources are in use. 
Unavailable adjustments are not shown on the screen.
FUNCTION 
(default 
setting / value)
DESCRIPTION
Keystone (0)Corrects any keystoning of the image. Refer to Correcting keystone on 
page 29 for more information.
Auto Resize 
(on)
Automatically resizes the input signal pixel resolution to the native resolution 
of the projector.
On: The pixel resolution of the input signal is converted to...

Operation 42
Setting menu 
FUNCTION 
(default setting 
/ value)
DESCRIPTION
Mute (off)
Toggles projector audio and Power On/Off Tone between on and off.
To  d i s a b l e  Power On/Off Tone, go to
  Setting > Mute and press 
Left3/Right 4. Then press Down 6 to choose Power On/Off Tone and 
press Left3/Right 4 to  select off.
Volume (5)Adjusts audio volume level.
OSD Time 
(20)Sets the length of time the OSD will remain active after your last button 
press. The range is from 5 to 100 seconds.
Blank Time...

Operation 43
Advanced menu
FUNCTION 
(default setting 
/ value)
DESCRIPTION
Mirror (Floor 
front)The projector can be installed on a ceiling or behind a screen, or with one 
or more mirrors. Contact your dealer for the ceiling mount bracket 
(optional accessory) if you need to install the projector on your ceiling. 
Refer to Choosing a location on page 12 for more information.
Source Scan 
(on)Sets whether the projector searches automatically for input signals. If the 
source scan is On, the projector...

Operation 44
High Altitude 
Mode (off)
A mode for operation in areas like high altitude or high temperature. We 
recommend you use the High Altitude Mode when your environment is 
higher than 3000 feet above sea level, or is hotter than 40
°C, or whenever 
the projector will be used for extended periods of time (>10 hours) 
without shutdown.
To activate the High Altitude Mode, select On by pressing Left 3/Right 
4on the projector or remote control. A confirmation message displays. 
Press6.
Next time you...

Operation 45
Information menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. 
Unavailable adjustments are not shown on the screen.
FUNCTIONDESCRIPTION
SourceShows the current signal source.
ResolutionShows the resolution of the input signal.
Picture ModeShows the selected mode in the   Picture menu.
Equivalent 
Lamp HourDisplays the equivalent lamp hour calculated by the built-in timer.
SystemShows the...

Maintenance 46
Maintenance
Care of the projector
Your projector needs little maintenance. The only thing you need to do on a regular basis is 
to keep the lens clean.
Never remove any parts of the projector except the lamp. Contact your dealer if other parts 
need replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface. 
• Use a canister of compressed air to remove dust. 
• If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner...