BenQ Mk2443 Users Manual

							English
8  Section 1: Quick Start Guide
9. Activate the remote control
Installing batteries
    1.  Turn the remote control to reveal its back side, 
and open the lid of the battery compartment.
    2.  Insert the batteries (supplied) ensuring that the 
positive and negative marked battery terminals 
match the (+) and (-) marks in the battery 
compartment. Note that these batteries are 
provided for your convenience so that you can 
operate the display straight away. You should 
replace them as soon as possible.
    3.  Refit the lid of the battery compartment.
 
Battery safety notice
The use of the wrong type of batteries may cause chemical leaks and/or
explosion. Please note the following:
	 	 •		 Always	ensure	that	the	batteries	are	inserted	with	the	positive	and	negative	 terminals in the correct direction as shown in the battery compartment.
	 	 •		 Different	types	of	batteries	have	different	characteristics.	Do	not	mix	different	 types.
	 	 •		 Do	not	mix	old	and	new	batteries.	Mixing	old	and	new	batteries	will	shorten	 battery life and/or cause chemical leaks from the old batteries.
	 	 •		 When	batteries	fail	to	function,	replace	them	immediately.
	 	 •		 Chemicals	which	leak	from	batteries	may	cause	skin	irritation.	If	any	chemical	 matter seeps out of the batteries, wipe it up immediately using a dry cloth.
	 	 •		 Due	to	varying	storage	conditions,	the	battery	life	for	the	batteries	included	with	 your TV may be shortened. Replace them within 3 months or as soon as you can 
after	initial	use.
 
						

							English
Section 1: Quick Start Guide     9
Using the remote control
 
1.   Point and aim the top front of the remote control 
directly at the display when pressing the buttons. 
  2.  The remote control must be held at an angle 
within 30 degrees of the display's remote control 
sensor window to function correctly. The 
distance between the remote control and the 
sensors should not exceed 5 meters.
  3.  Do not cover the sensor window on the front of 
the display (below the power indicator lamp), or 
place objects in front of it which will block the 
direct line of sight between the remote control 
and the sensor window on the display.
  	 •		 Do	not	let	the	remote	control	become	wet,	or	
place it in humid environments (like bathrooms.)
	 •		 If	the	remote	control	sensor	window	on	the	 display is in direct sunlight or strong light, the 
remote control may not operate properly. In this 
situation, change the light source or readjust 
the angle of your display, or operate the remote 
control from a location closer to the remote 
control sensor window on the display.
 
						

							English
10  Section 1: Quick Start Guide
Before you can use your TV to view TV programs, you need to let it search for and tune 
TV station programs appropriate to your region. This process only needs to be done when 
the TV is newly installed, or whenever you install it in OSD menu for convenience of 
operation.
  1.  When Backlight  is highlighted, use the 
◄ or 
► buttons to adjust the backlight.
  2.  Press 
▼ button to select Language, use the 
◄ or 
► buttons to select the language 
displayed on the menu.
  3. Press 
▼ button to select Auto Tuning and press the OK
 button.
  4. Press 
◄ or 
► to select the Country
 where you operate the TV, then select Start  and 
press OK . The Auto Tuning automatically creates a list of receivable channels. Press 
the BACK  button at any time to interrupt the memorization process. (The list cannot 
be created if interrupted)
10. Initialize your TV
Press Power button on the remote control. the TV will turn on and the power indicator 
will light up blue. When first turned on (and until tuned), the Initial Menu will display:
11. View the TV programs
 •		 Press	PROG ▲ or PROG
▼ on the remote control to sequentially cycle through 
your TV channels. 
	 •		 To	select	a	single-	or	double-digit	channel,	press	the	corresponding	channel	 selection buttons on the remote control. For example, to select channel 8, press 0 
and 8 on the remote control.
	 •		 Press	VOL
  or VOL on the remote control to increase volume. The volume 
indicator will increase in length as volume rises.
	 •	 Press	
 MUTE on the remote control to turn off the sound temporarily. Press  
MUTE once more, or press VOL
 to restore the sound level. 
	 •	 You	can	press	RETURN on the remote control to quickly return to the previous  viewed channel.
 
						

							English
Section 1: Quick Start Guide     11
Care and cleaning information
•		 Always	turn	off	the	display	and	disconnect	it	from	the	mains	power	before	cleaning.
•		 Do	NOT	use	cream,	liquid,	aerosol	or	spray	cleaners.	Use	only	a	slightly	damp	well	wrung-out	(drip-free)	and	lint-free,	clean	soft	cloth	and	lightly	wipe	the	display.
  If necessary, use a pH-neutral liquid dish-washing detergent diluted with water on a 
separate clean lint-free cloth to remove oil or grease marks. Wipe over again with a 
cleandry lint-free cloth to remove any smear marks.
•	 Under	close	examination	and	in	certain	circumstances,	you	may	notice	that	a	few	 non-active pixels appear on the screen as a fixed point of colour. Please note that this 
does not affect the performance of your product as it is usually not visible at normal 
viewing distances.
•	 If	the	display	is	not	going	to	be	used	for	an	extended	period	of	time	(like	when	you	 are going away for holidays), it should be switched off and unplugged from the wall 
outlet. You should also consider removing the batteries from the remote control (as 
they may leak)
•	 LCD	(Liquid	Crystal	Display)	screens,	like	plasma	and	conventional	CRT	(Cathode	 Ray Tube) screens, are also susceptible to ‘screen burn-in’ or ‘image retention’ which 
can be found on the screen as visible fixed lines and shades and can’t be removed. 
If	the	circumstance	is	caused	due	to	improper	use	by	the	user	(such	as	the	left	and	
right straight lines occurred from displaying still pictures for long periods of time, 
the channel logos, etc.), an appropriate service fee should be charged. To avoid such 
permanent damage to the screen, it is advisable to take the following preventive 
actions:(1) Avoid displaying still (inactive) image s for more than two hours.
(2) Change the screen image aspect ratio from time to time.
(3) If it is necessary to display still images for a long time, lower the contrast and  brightness.
(4) The LCD monitor is designed for use in normal home environment, do not use it  in any other place, such as public places.
What's next?
 You have reached the end of Section 1: Quick Start Guide. By now, you should have a 
reasonable understanding of your new LCD TV and its controls, know how to install, 
connect, turn on and how to care for and maintain it.
  Should you wish to maximize your viewing experience pleasure, Section 2 of this 
booklet contains the User Manual which describes how to customise the display 
settings to suit your preferences and viewing environment. It details the features and 
functions of the display and provides product specifications and troubleshooting 
information for your further assistance.
 
						

							English
MK2443 LCD TV
Section 2: User Manual
We l c o m e
 
						

							English
Getting to know your TV     13
Getting to know your TV
 
Front view
No.Name Description
1 VOL +/- button • Adjusts the volume level of the speakers.
•	In	the	OSD	menu,	moves	the	selection	highlight	left	or	right	or	
changes settings.
2 MENU button Displays the OSD (On-Screen Display) menu if not visible, or 
exits the current menu if displayed.
3 Power/Standby 
button Toggles the display between standby mode and on.
4 CH +/- button • Press these buttons to sequentially change channels.
• In the OSD menu, moves the selection highlight up or down.
5 ENTER button •	Select	input	source.
•	In	the	OSD	menu,	confirms	the	selection.
6 Remote Control 
Receiver Receives command signals from the remote control. Do not 
obstruct the sensor by placing any objects in front of it, which 
will hinder the reception of signals.
7 Power Indicator • Lights up blue when the diaplay is powered on.
• Lights up orange when the diaplay is in standby mode.1   2  3   4 
  5   6   7
 
						

							English
14 Getting to know your TV
Rear view
No. Name Description
A AC Power Switch Use this switch to turn the main power on/off.
B AC Power Input Connect to a AC power source.
C AV Composite Video 
Input Connect to the Composite video (AV) output of video 
devices.
D USB Terminal Connector	for	software	upgrades	and	Media	Play,	etc.
E HDMI2 Input Terminal Connect to the HDMI digital audio/video output on 
digital video devices.
F HDMI1 Input Terminal Connect to the HDMI digital audio/video output or DVI 
digital video output on digital video devices.
G VGA (PC Video Input) Connect to the RGB video (D-sub) output of PCs. 
H S-VIDEO Input Connect to the S-Video output of video devices.
I YPbPr Component Video 
Input Connect to the Component video (Y Pb Pr) output of 
video devices.
J Audio In L/R Connect	to	the	left/right	audio	channel	output	of	video	
devices.
A
    B           C  D  E    F      G   H    I    J  K       L      M N O    P  Q
 
						

							English
Getting to know your TV     15
No.Name Description
K PC/DVI Audio In Connect to the audio output of PCs. This jack is used for 
PC Audio input, when the picture input is connected to 
VGA or DVI (via HDMI1 input) on the PC.
L SCART Input Connect to external equipment with scart socket. This 
scart input allows audio and CVBS/YC/RGB+CVBS. RGB, 
S-VIDEO from an external devise to be shown on your 
T V.
M SPDIF Optical output Connect this port to the SPDIF input of A/V device.
N Headphone Jack Connect to your headphones.
O RS232 signal input This port is for the service technician’s use.
P RF Antenna / Cable TV 
Input Connect to RF Cable or CATV cable.
Q CAM Card Slot Plug the CAM Card into this slot.
 
						

							English
16 Getting to know the remote control
1
22
23
25
24
26
2
3
4
8
6
7
12
11
10
13
17
21
5
9
20
18
16
15
19
27
30
33
34
35
29
28
31
3214
1.  POWER
Press this button to power the TV on or put it to the 
standby mode.
2. DTV/RADIO
Digital TV function. Switch between DTV/RADIO 
programs.
3. INFO
Press this button to display the input source 
4. SLEEP
Press this button to set the automatic shut-off timer.
5. SOUND
To select sound mode from Standard, Music, Movie, 
Sports, and User.
6. FREEZE
Press this button to freeze the image on the screen.
Press the button again to resume viewing in real time. 
7. 0-9 Channel selection
Press these buttons to select the program you wish to 
view.
8. 
 SRS
Press to switch on/off SRS TruSurround HD function.
9. GUIDE
Displays the Electronic Program Guide on the screen 
in DTV mode.  Pressing again to turn Guide off.
10. VOL
 / VOL
Press these buttons to raise or lower the volume level.
information.
11. BACK 
In the OSD menu, press this button to return to the 
previous menu page. 
12.  ▲/
▼ /
◄ /
► /OK
•	Press	 ▲ or 
▼ to change TV programs sequentially.
•	Press	 ◄ or 
► to adjust volume. 
When the OSD (On-Screen Display) menu displays 
on-screen:
•	Press	 ▲ or 
▼ to select settings.
•	Press	 ◄ or 
► to adjust settings.
• 	Press 	OK 	to 	execute 	selections, 	or 	to 	enter 	a 	submenu	
you have selected.
13. 
  INPUT
Press these buttons to sequentially change channels.
Getting to know the remote control
Remote Control
 
						

							English
Getting to know the remote control     17
1
22
23
25
24
26
2
3
4
8
6
7
12
11
10
13
17
21
5
9
20
18
16
15
19
27
30
33
34
35
29
28
31
3214
14 .  Green/ Rotate
•	Green:	Function	key	for	teletext,	program	edit,	or	 electric program guide. 
•	Rotate:	Rotate	the	photo	90°,	180°,	270°,	360°	 clockwise in Media.
15. 
 Red/ Skip  (Backwards)
•	Red:	Function	key	for	teletext,	program	edit,	or	 electric program guide. 
•	Skip:	Go	to	previous	chapter/track/file	in	Media.
16. 
 Scan (Backwards) 
Search backwards in Media.
17. 
 Play/Pause
Start or pause playback of  media files in Media.
18 .  Senseye
 
Press this button to display the senseye menu.
19. 
 MUTE
Press this button to mute the sound output. Press it 
again to restore the sound output.
20.  B AC K L I G H T
Press this button to adjust your desired screen 
backlight level.
21.  TV AUDIO
•	Select	sound	modulation	in	ATV.
•	Select	audio	language	in	DTV.
•	Select	the	Left/Right	Audio	Channels	in	other	 sources (except ATV, DTV, and Media)
22. ATV/DTV  
Swap between ATV/DTV. Swap to the last TV source 
when in other source.
23. PICTURE  
Press this button to select a desired preset picture 
mode: Standard, Mild, User, Dynamic.
24. SUBTITLE  
•	ATV:	Switch	between	available	subtitle	languages.
•	DTV:	Display	subtitle	language	selection	box.	
25. WIDE  
Press this button to adjust the screen image aspect 
ratio.
26. RETURN  
Press to toggle between the current channel and the 
previous one.
27. PROG ▼/
▲
Press these buttons to sequentially change channels.