BenQ Lx60st Users Manual
Here you can view all the pages of manual BenQ Lx60st Users Manual. The BenQ manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Operation 31 6. Press to select a menu item to be changed and adjust the value with /. See Fine-tuning the image quality in user modes below for details. 7. When all settings have been done, highlight Save Settings and press MODE/ ENTER to store the settings. 8. The confirmation message “Setting Saved” is displayed. Fine-tuning the image quality in user modes According to the detected signal type, there are some user-definable functions available when User 1 or User 2 is selected. Based on your needs,...
Page 32
Operation 32There are many different shades that are considered to be white for various purposes. One of the common methods of representing white color is known as the “color temperature”. A white color with a low color temperature appears to be reddish white. A white color with a high color temperature appears to have more blue in it. 3D Color Management In most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge room situations where lights...
Page 33
Operation 33 Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic. 6. Press to highlight Gain and adjust its values to your preference by pressing / . The contrast level of the primary color you select will be affected. Every adjustment made will reflect to the image immediately. 7. Repeat steps 3 to 6 for...
Page 34
Operation 34 To cancel the timer, perform the following steps: 1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight Off. Press MODE/ENTER. A confirmation message is displayed. 2. Highlight Ye s and press MODE/ENTER to confirm. You will see the message “Timer is Off” appearing on the screen. Remote paging operations Connect the projector to your PC or notebook with a USB cable prior to using the paging function. See Connection on page 17 for details. You can operate your display...
Page 35
Operation 35 Locking control keys With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except POWER. 1. Go to the SYSTEM SETUP: Basic > Panel Key Lock menu, and select On by pressing / on the projector or remote control. A confirmation message is displayed. 2. Highlight Ye s and press MODE/ENTER to confirm. To release panel key...
Page 36
Operation 364. If the action is successful, you see the message Captured Succeeded on the screen. The captured picture is saved as MyScreen. 5. To view the captured picture displayed as the startup screen, set MyScreen in the SYSTEM SETUP: Basic > Splash Screen menu and restart the projector. • Using the OSD menu 1. Press MENU/EXIT and then press / until the SYSTEM SETUP: Basic menu is highlighted. 2. Press to highlight MyScreen and press MODE/ENTER. 3. Repeat steps 2-5 in the Using the remote...
Page 37
Operation 37 Presenting from a USB Reader This feature displays a slide show of images stored on a USB flash drive connected to the projector. It can eliminate the need for a computer source. Supported image formats: • Not all PDF files can be displayed. • A square box will be displayed on the filename for unidentified characters. • Thai filename is not supported. • Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than WXGA (1280 x 800) only. • If a folder...
Page 38
Operation 38 During a slide show Setting page You can adjust the file order and Slideshow settings. When you are done, press OK to save the settings or press Cancel to ignore the change. Shutting down the projector 1. Press POWER or OFF, and a confirmation message will be displayed prompting you. If you dont respond in a few seconds, the message will disappear. 2. Press POWER or OFF a second time. The POWER indicator light flashes orange, the light source shuts down. 3. A Power Off Ring Tone...
Page 39
Operation 39 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. Main menu Sub-menu Options 1. DISPLAY Wall ColorOff/Light Yellow/Pink/Light Green/ Blue/Blackboard Aspect Ratio Auto/Real/4:3/16:9/16:10 Auto Keystone On/Off Keystone Position Phase H. Size Digital Zoom 3D Sync Off/Frame Sequential/Top-Bottom 3D Sync Invert Disable/Invert Teaching TemplateBlackboardOff/Letter Formation/Worksheet/...
Page 40
Operation 40 Main menu Sub-menu Options 4. SYSTEM SETUP: Basic Language Projector PositionFront Table/Rear Table/Rear Ceiling/Front Ceiling Menu SettingsMenu Display Time5 sec/10 sec/15 sec/20 sec/25 sec/30 sec Menu PositionCenter/Top-Left/Top-Right/Bottom- Right/Bottom-Left Reminder MessageOn/Off Operation SettingsDirect Power On On/Off Signal Power On On/Off Auto Power OffDisable/5 min/10 min/15 min/20 min/25 min/30 min Eco Blank TimerDisable/5 min/10 min/15 min/20 min/25 min/30 min Sleep...