BenQ LR100 User Manual

							Playback mode  61
English
4. Press  ,  ,  , or   to locate the area to trim.
5. Press   to confirm the change.
6. Press   or   to select 
Overwrite or Save as and press   button to 
save the image file.
Resizing
Changes an image file to a smaller size, and overwrites the image file or saves it 
as another new file.
To resize an image:
1. In Playback mode, press   or   to select the image you want to resize.
2. Press  >  > 
Resize >   or  .
3. Press   or   to select the target image size to which you want to reduce.
4. Press   to confirm the change.
5. Press   or   to select 
Overwrite or Save as and press   button to 
save the image file.
Startup Image
Sets the welcome screen when the camera is powering on.
To select a startup image:
1. In Playback mode, press   >   > Startup Image >   or  .
2. Press   or   to select one of the following options.
• To use the default startup image, select 
Default.
• To use a custom image, select 
My Photos and press   or   to select an 
image.
• To disable the startup image, select 
Off.
3. Press   to confirm.
You cannot trim images in the size of 3:2, 16:9, or VGA, or images captured in 
Panorama mode.
You cannot resize images in the size of 3:2, 16:9, or VGA, or images captured in 
Panorama mode.
LR100 UM - EN.book  Page 61  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							62  Playback mode
English
DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on 
the memory card for printing and specify the number of print copies in advance 
using the camera. This is extremely convenient for sending the images to a 
photo developing service or for printing on a direct print function compatible 
printer.
To set up DPOF:
1. In Playback mode, press   >   > DPOF.
2. Press   or   to select one of the following options.
• To set the DPOF setting for one image, select 
One and press  .
• Press   or   to select an image.
• Press   or   to specify the number of copies.
• Press   to decide whether you want to turn the date stamp on.
• To set the DPOF setting for all images, select 
All and press  .
• Press   or   to specify the number of copies.
• Press   to decide whether you want to turn the date stamp on.
• To clear all DPOF settings to initial default, select 
Reset > Ye s.
3. Press   to confirm the settings.
Radial Blur
Applies a rotating motion effect to give a feel of speed.
To apply a Radial Blur effect:
1. In Playback mode, press   >   > Radial Blur >   or  .
2. Press   or   to select a degree of Radial Blur.
3. Press   to confirm the change.
4. Press   or   to select 
Overwrite or Save as and press   button to 
save the image file.
You cannot use this function on images captured in Panorama mode.
LR100 UM - EN.book  Page 62  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							Playback mode  63
English
Face Retouch
Enhances and brightens the tone of skin and adjusts the eyes size so that the 
facial appearance looks better.
To apply a Face Retouch effect:
1. In Playback mode, press   >   > 
Face Retouch >   or  .
2. Press   or   to select the retouch item 
and press   or   to enter the submenu.
3. Press   or   to adjust the desired 
setting and press   to confirm.
4. After all settings are complete, press   or   to select 
Save and press 
 to save the image file.
• The cursor on the picture frame will only appear if there is more than one face in 
the shot.
• Only one face can be retouched each time.
• This function is applicable only once.
• You cannot use this function on images captured in Panorama mode.
LR100 UM - EN.book  Page 63  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							64  Working with computer and AV system
English
Working with computer and AV system
Bundled software
The camera offers the following programs on a CD.
To install this program, see the information supplied with the CD.
Connecting the camera to a computer
You can connect the camera to a PC or notebook to transfer, view, print, or edit 
files as well as charge the camera.
To connect the camera to a computer:
1. Connect the end of the smaller plug of the USB cable to the camera.
2. Turn on the camera.
3. Open the USB/HDMI port cover.
4. Connect the other end of the USB cable to an 
available USB port on your computer.
5. Select 
Computer and wait for the connection.
6. A 
Removable Disk icon appears in My 
Computer
. Click this icon to access the files in your camera.  ArcSoft 
MediaImpression™Easily, creatively, and productively manage your 
multimedia files. Create your own movies or photo slide 
shows, and share your photo, video and music files easily 
through simple e-mail attachments or popular photo 
printing and video sharing websites. 
• When connecting the camera to a computer, it is necessary to install a battery 
into the camera.
• When connecting the camera to a computer, please use the original accessory of 
the USB cable to avoid possible system conflicts and damage to the camera.
LR100 UM - EN.book  Page 64  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							Working with computer and AV system  65
English
Connecting the camera to an AV system
You can play files in your camera on a TV using a micro HDMI cable.
To connect the camera to a TV using a micro HDMI cable:
1. Open the USB/HDMI port cover.
2. Connect one end of the micro HDMI cable to the 
camera.
3. Connect the other end of the micro HDMI cable 
to an HDMI TV.
4. Turn on the TV, and then switch the input source 
of the TV to “HDMI”.
5. Turn on the camera, and operate the media 
playback using the camera control buttons.
To operate the media playback with the TV remote control:
1. Turn on the camera and set HDMI Control to On. See HDMI Control on 
page 49.
2. Turn off the camera and connect the camera and TV with a micro HDMI 
cable.
3. Turn on the TV, and then switch the input source of the TV to “HDMI”.
4. Turn on the camera.
5. Follow the on-screen instructions to operate the camera via the TV.
• Before connecting the camera to a TV, set the TV Out setting to match the TV’s 
video output format. See TV Setting on page 49 for details.
• For details on changing the input source of the TV, refer to the TV’s user’s manual.
• Some TVs may not recognize the video format (1080p or 1080i). Please check the 
user manual that came with the TV for more assistance.
• Some TVs may not work with the TV remote control even the on-screen 
instructions are displayed on the camera. If this occurs, set HDMI Control to Off 
and operate using the camera.
• The micro HDMI and AV cables are optional accessories.
LR100 UM - EN.book  Page 65  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							66  Working with computer and AV system
English
Printing images
In addition to printing images by connecting the camera to a printer via a 
computer or bringing the memory card (if available) to a photo-processing 
center, you can choose to print using PictBridge.
Printing with PictBridge
You can directly print images by connecting your camera to a PictBridge-
compatible printer without using a computer.
To print images from a PictBridge-compatible printer:
1. Connect the end of the smaller plug of the USB cable to the camera.
2. Connect the other end of the USB cable to an available USB port on your 
printer.
3. Turn on the printer. Wait for a while until it finishes starting up and is ready 
to print.
4. Turn on the camera.
5. Select 
Printer and wait for the connection.
6. Select one of the following options:
• To print one image at a time, select 
Print One, and press   or   to 
select an image.
• To print all images at a time, select 
Print All.
• To print all images (shown by thumbnails) at a time, select 
Print Index.
7. Press .
• The above procedure may vary depending on the printer type you are using.
• If you connect the camera to your printer while the printer is still starting up, the 
camera will be automatically turned off.
• Failure to follow the above procedure will make the camera show an error 
message. Please disconnect the camera and the camera will be automatically 
turned off.
LR100 UM - EN.book  Page 66  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							Troubleshooting and service information  67
English
Troubleshooting and service 
information
If your camera cannot operate normally, see the frequently encountered 
problems and solutions listed below. If the problem persists, contact your 
nearest service center or technical support.
ProblemCauseSolution
The camera 
cannot power 
up.There is no battery or the 
battery is not inserted 
correctly.Insert the battery correctly.
The battery has no power. Replace the battery.
The battery 
power is 
draining quickly.The external temperature is 
extremely low.--
Many shots are being 
captured in dark places, 
requiring a flash.--
The battery or 
camera is warm.The camera or flash was 
used continuously over a 
long period of time.--
The flash does 
not fire or 
recharge.The camera flash is turned 
off.Set the flash to Auto Flash.
The light source is 
sufficient.--
Even though the 
flash fired, the 
image is dark.The distance to the subject 
is greater than the flashs 
effective range.Get closer to the subject and 
shoot.
The image is 
too bright or 
too dark.The exposure is excessive 
or inadequate.Reset exposure compensation.
I cannot format 
a memory card.The memory card is write-
protected.Remove the write protection.
End of the memory card 
life.Insert a new memory card.
LR100 UM - EN.book  Page 67  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							68  Troubleshooting and service information
English
Technical support
For technical assistance, free driver updates, product information, and news 
releases, visit the following web site:
http://www.BenQ.com
I cannot 
download 
images from the 
camera to my 
computer.The free space on the hard 
disk of your computer is 
insufficient.Ensure that the hard disk has 
enough space for running 
Windows and that the drive for 
loading image files has free 
space equal to or greater than 
the memory card in the camera.
There is no power being 
supplied to the camera.Replace the battery.
The camera 
does not shoot 
even when 
pressing the 
shutter.The battery is running low. Replace the battery.
The camera is not in the 
Capture mode.Switch to the Capture mode.
The shutter was not 
pressed all the way down.Press the shutter all the way 
down.
The internal memory or 
memory card does not have 
any free space.Load a new card or delete 
unwanted files.
The flash is recharging. Wait until the flash mode icon, 
indicated on the screen, stops 
flashing.
The camera does not 
recognize the memory card.Format the memory card 
before the initial use or before 
using with another camera.
I cannot print 
images with 
PictBridge-
compliant 
printers.The camera is connected to 
the printer when the 
camera is powered off.Connect the camera to the 
printer, turn on the camera, and 
then select 
Printer.
ProblemCauseSolution
LR100 UM - EN.book  Page 68  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							Specifications  69
English
Specifications
Sensor Panasonic 14 Mega Pixels, 1/2.3 inch CMOS
Zoom Optical: 5X
Digital: Up to 5X (Preview) / Up to 12X (Playback)
Lens  f = 4.6 (W) ~ 23 (T) mm
F= 3.2 (W) ~ 6.4 (T)
f = 26 mm ~ 130 mm, 35 mm equivalent
Focus Range
Normal: W = 5 cm ~ Infinity, T = 60 cm ~ Infinity
Super Macro: 5 cm
LCD 2.7” LCD 230k pixels
Image Resolution 14M (4320 x 3240), 8M (3264 x 2448), 5M (2560 x 1920), 
3M (2048 x 1536), VGA (640 x 480)
Movie Format FHD 1080p (1920 x 1080) 30fps, HD 720p (1280 x 720) 
60fps, HD 720p (1280 x 720) 30fps, VGA (640 x 480) 30fps, 
QVGA (320 x 240) 120fps, HD 720p (1280 x 720) with 
Watercolor
Continuous recording with stereo sound
Shutter Speed 1/2000 ~ 1 sec. 
(Fireworks 2 sec.; Night Scene 1/2000 ~ 15 sec.)
White Balance Auto, Daylight, Cloudy, Tungsten, Fluorescent H, 
Fluorescent L, Manual
Exposure -2 ~ +2 EV (0.3EV / step)
ISO Auto / 100 / 200 / 400 / 800 / 1600 / 3200* / 6400*
*3200 / 6400 for resolution of 3M or under only
Flash Auto / Auto Anti Red-eye / Forced On / Slow Sync / Forced 
Off
Drive Mode 10 sec. (Self-timer) / 2 sec. (Self-timer) / Double / Off
Power Source CIPA approximately 180 based on bundled Li-ion battery
Storage Type Built-in approx. 42.9 MB
4GB SD / 32GB SDHC / SDXC (> 32GB) card compatible
File Format Still Image: JPEG (EXIF 2.3 compatible); DCF compatible 
Video: MOV
Audio: WAV
LR100 UM - EN.book  Page 69  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							70  Specifications
English
Dimensions / 
Weight92.7 x 55.3 x 18.1 mm
100 g (w/o battery & SD card)
Interface Digital output: USB 2.0 compatible
Audio / Video output (NTSC/PAL/HDMI)
PictBridge compatible
Accessories USB Cable / Software & User Manual CD / Quick Guide / 
Hand Strap / Pouch (optional) / Li-ion battery / AC power 
adapter
 Available accessories depend on the actual items shipped 
and may vary from the list above. 
All information, designs, and specifications are subject to change without prior 
notice.
LR100 UM - EN.book  Page 70  Wednesday, May 30, 2012  9:16 AM
Downloaded From camera-usermanual.com BenQ Manuals