BenQ G900 User Manual

							
  11
  Getting the most from your BenQ monitor
4. Getting the most from your BenQ monitor
To gain the most benefit from  your new BenQ color LCD flat sc reen monitor, you should install 
the custom BenQ LCD Monitor driver software  as provided on the BenQ LCD Monitor CD-ROM.
The circumstances under which you connect and in stall your BenQ LCD Monitor will determine 
which process you need to follow to successfully install the BenQ LCD Monitor driver software. 
These circumstances relate to which version of  Microsoft Windows you are using, and whether 
you are connecting the monitor and installing the so ftware onto a new computer (without existing 
monitor driver software), or whet her you are upgrading an existing  installation (which already has 
existing monitor driver software) with a newer monitor. 
In either case however, the very next time you  turn on your computer (after connecting the 
monitor to your computer), Windows will automatically recognise the new (or different) 
hardware, and will launch its  Found New Hardware wizard. 
Follow the wizard instructions until it asks you to  select a monitor model. At that point, click the 
Have Disk  button, insert the BenQ LCD Monitor CD-ROM and select the appropriate monitor 
model. Further details and step-by-step instruc tions for both an automatic (new) or upgrade 
(existing) installation follow. See:
• How to install the monitor on  a new computer on page 12. 
• How to upgrade the monitor on an  existing computer on page 13 
If you require a User Name and Password to login to your Windows computer, you must be logged on as 
an Administrator or as a member of  the Administrators group in order to install the monitor driver software. 
Furthermore, if your computer is connected to a network which has security access requirements, network 
policy settings may prevent you from in stalling software on your computer. 
 
						

							
12  Getting the most from your BenQ monitor  
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
software on a new computer which has never  had a monitor driver installed before. This 
instruction is only suitable for a computer which has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an exis ting computer that has already had another monitor 
connected to it (and has monitor driver software inst alled), you should not be following these instructions. 
You should instead be following the instructions for How to upgrade the monitor on an existing computer.
1. Follow the instructions in  How to assemble your monitor hardware on page 7 . 
When Windows starts, it will automatically detect the new monitor and launch the Found New 
Hardware Wizard . Follow the prompts until it displays the option to  Install Hardware Device drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device  option, and click Next.
4. Check the option for  CD-ROM drives (uncheck all others) and click  Next.
5. Look to confirm that the wizard has  selected the correct name of your monitor  and click 
Next .
6. Click  Finish.
7. Restart the computer.
 
						

							
  13
  Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer
This instruction details the procedure for manual ly updating the existing monitor driver software 
on your Microsoft Windows computer. It is curr ently tested as compatible for Windows XP and 
Windows Vista Operating System (OS). 
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, 
however, as at the time of writing, BenQ has done no  testing of this driver on other versions of Windows 
and cannot guarantee its operation on those systems.
Installing monitor driver software involves selecting  an appropriate information file (.inf ) on the 
BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and letting 
Windows install the corresponding  driver files from the CD. You need only steer it in the right 
direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide you 
through the file selection and installation process. 
See:
• How to install on Windows Vista systems on page 14 .
• How to install on Windows XP system on page 15 .
 
						

							
14  Getting the most from your BenQ monitor  
How to install on Windows Vista systems
1. Open Display Settings .
Right-click the desktop and select  Personalize from the popup menu.
Select  Display Settings  from the Personalize appearance and sounds  window. 
The  Display Settings  window will display.
2. Click the Advanced Settings  button. 
The Generic PnP Monitor Properties  window will display.
3. Click the Monitor tab and the  Properties button.
4. Click  Continue  in the prompted  User Account Control  window.
5. Click the  Driver tab and the  Update Driver  button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the  Update Driver Software  window, select the option ‘ Browse my computer for driver 
software ’.
8. Click ‘ Browse’ and navigate to the fo llowing directory: d:\BenQ_LCD\Driver  (where d is the 
drive letter designator for the CD-ROM drive).
The drive letter for your CD drive may differ from th e example above depending upon your system – it may 
be ‘D:’ or ‘E:’ or ‘F:’ etc.
9. Select the correct folder name of your  monitor from provided driver list, and click  Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click  Close.
You do not need to restart Windows Vista, as the BenQ LCD monitor drivers will operate immediately 
with no further action required by you. 
 
						

							
  15
  Getting the most from your BenQ monitor
How to install on Windows XP system
1. Open  Display Properties .
The quickest shortcut to  Display Properties is through the Windows desktop. 
Right-click the desktop and select  Properties from the popup menu.
Alternatively, the Windows menu to  Display Properties is located in Control Panel . 
In Windows XP version,  Control Panel is located directly under the main  Start menu item. 
The menu options displayed will depend upon whic h type of view is selected for your system. 
• Under the Classic view, click  Start | Control  Panel  | Display .
• Under the Category view, click  Start | Control  Panel  | Appearance and Themes  | Change the 
screen resolution .
The  Display Properties  window will display.
2. Click the Settings tab and the  Advanced button. 
The Advanced Display Properties  window will display.
3. Click the Monitor tab and select the ‘Plug and  Play Monitor’ from the list.
If there is only one monitor in the list, it will already be selected for you.
4. Click the Properties button. 
The Monitor Properties  window will display. 
If the driver provider is listed as BenQ, and the model matches that of your new monitor, the proper 
drivers are already installed, and you need do nothing further. Cancel out of these property windows. 
However, if BenQ is not listed as the manufacturer, or the correct model is not currently shown, you 
will need to continue with these instructions.
5. Click the  Driver tab and the  Update Driver  button.
The Hardware Update Wizard  will display. Follow the wizard instructions noting the steps below:
6. Insert the BenQ LCD Monitor CD-ROM into a  CD drive on the computer you attached the 
monitor to.
7. Check the option ‘ Install from a list or specific location ’ and click Next.
8. Check the option ‘ Search for the best driver in these locations ’ and also check ‘Search 
removable media ’, then click Next.
Please wait while the wizard searches for drives and the BenQ LCD Monitor CD inserted in step 6. 
When completes, the wizard should have found and selected the BenQ driver on the CD appropriate to 
your monitor model.
9. Select (single-click) the correct name of  your monitor from provided driver list on the CD, 
and click the  Next button.
This will copy and install the appropriate monitor driver files to your computer.
10. Click  Finish.
This will close the wizard and return you to the  Monitor Properties window.
11. Click Close, OK , and OK.
This will close the  Display Properties windows. You do not need to restart Windows XP, as the BenQ 
LCD monitor drivers will operate immediately with no further action required by you. 
 
						

							
16  Picture optimization  
5. Picture optimization 
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the AU TO key 
function. Press the  AU TO
 key to optimize the currently displayed image to the screen. 
When you connect a digital video output using a digital (DVI) cable to your monitor, the  AUTO key and the 
Auto Adjustment  function will be disabled, because the monito r will automatically display the best image. 
Please ensure that the connected graphic card on your  computer is set to the native resolution of the 
monitor when you use the  AUTO key function.
If you wish, you can always adjust the screen  geometric settings manually using geometry menu 
items. To assist you in this ende avour, BenQ has provided a screen  test image utility which you can 
use to check for screen color, gray scale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as  the desktop of your operating system. However,  we recommend that you use auto.exe. As you 
run auto.exe, a test pattern displays.
2. Press the  AU TO key on the monitor.
3. Press the  MENU key to access the monitor On-Screen Display (OSD) menu.
4. Use the 
W or X keys to select  DISPLAY and press the  ENTER key to enter the menu.
5. If you notice a vertical noise (like a curtai n effect-shimmering of vertical lines), press the 
W 
or 
X keys to select  Pixel Clock and press the  ENTER key. Then press the W or X keys to 
adjust the monitor until the noise disappears.
6. If you notice a horizontal noise, press the 
W or X keys to select  Phase and press the  ENTER 
key. Then press the 
W or X keys to adjust the monitor until the noise disappears.
 
						

							
  17
  How to adjust your monitor
6. How to adjust your monitor
The control panel
1. “AUTO”: Adjust vertical position, phase, hori zontal position and pixel clock automatically.
2. “MENU” key: Activate OSD main menu and  return to the previous menu or exit OSD.
3.
W /Mode key: For Left/Decrease adjustment. The key is the hot key for Mode.
4. “Power”: Turn the power on or off.
5.  
X /Contrast/Brightness key: For Right/Increa se adjustment. The key is the hot key for 
Brightness and Contrast.
6. “ENTER” key: Enter sub menus and  select items. For models with DVI inputs, this key is also 
the hot key for Input. 
OSD = On Screen Display.
The hot-keys will display a graduated scale for adjustin g the value of that setting, and will only operate 
while the OSD menu is not currently  displaying. Hot-key displays will disappear after a few seconds of no 
key activity. See  Hot key mode on page 19 .
 
						

							18  How to adjust your monitor  
On Screen Display (OSD) menu structure 
DISPLAYAuto Adjustment
H. Position
V.  P o s i t i o n
Pixel Clock
Phase
Red
PICTUREBrightness
Normal Green
Contrast
Bluish Blue
Sharpness
Reddish
Color
User Mode YES
DynamicContrast
Reset Color NO
ON
OFF
PICTURE 
ADVANCEDPicture Mode
Standard
Senseye Demo
Movie
Display Mode
Dynamics
Photo
sRGB
ON
OFF
Full
Aspect
1:1
Display Mode is only available for wide-screen models, and 1:1 is specially available for 24’’ 
wide-screen models.
 SYSTEM
Input
D-sub English
OSD Settings
DVI French
DDC/CI
German
Information Language
Italian
Reset All 
H. Position Spanish
V. Position Polish/Japanese
Display TimeCzech/Traditional 
Chinese
OSD LockHungarian/Simplified 
Chinese
Serbo-croatian
ON Romanian
OFF Dutch
Russian
YES Swedish
NO Portuguese
5 Sec.
10 Sec.
15 Sec.
20 Sec.
25 Sec.
30 Sec.
ON
OFF
Input is only available for models with DVI inputs.
 
						

							  19   How to adjust your monitor
Hot key mode
The monitor keys perform as hotkeys to provide direct access to particular functions whenever the 
menu isnt currently displaying on-screen.
Brightness and Contrast hot keys
Mode hot key
Input hot key (not available for analog-only models)Press the 
X key to display the Brightness  
and Contrast indicators. Further press the 
the 
W or X keys, then the ENTER key to 
select Brightness or Contrast. The  
X key 
will increase the level, while the 
W key will 
decrease the level.
To exit, press the MENU key.
Press the 
W key continually to switch 
between the 5 modes for the main window, 
including Standard, Movie, Dynamics, 
Photo, and sRGB. The setting will take effect 
immediately.
See also 
Picture Mode on page 25. 
Press the ENTER key to toggle between 
different PC video signal inputs that may be 
connected to your monitor. 
The setting will take effect immediately.
See also 
Input on page 27. 
 
						

							20  How to adjust your monitor  
Main menu mode
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor. 
Press the MENU key to display the following main OSD menu. 
The OSD menu languages may differ from the product supplied to your region, see “Language on page 
28” under “OSD Settings” for more details. 
For more information on each menu, please refer to the following pages:
• Display menu on page 21
• Picture menu on page 23
• Picture Advanced menu on page 25
• System menu on page 27
There are four main OSD menus:
1. Display
2. Picture
3. Picture Advanced
4. System
Use the 
W (left) or X (right) keys to high-
light a menu item, and press the ENTER key 
to enter the Menu item settings.
1
3
4 2