BenQ G2400wt User Manual

							Welcome
G2400WT
24 Wide-Screen LCD Monitor
User Manual
 
						

							2   
Copyright
Copyright © 2008 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness 
for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication 
and to make changes from time to time in the contents hereof without obligation of BenQ 
Corporation to notify any person of such revision or changes.
Please follow these safety instructions for best performance, 
and long life for your monitor
Power Safet y
•The AC plug isolates this equipment from the AC supply.
•The power supply cord serves as a power disconnect device for pluggable equipment. The 
socket outlet should be installed near the equipment and be easily accessible.
•This product should be operated from the type of power indicated on the marked label. If you 
are not sure of the type of power available, consult your dealer or local power company.
Care And Cleaning
•Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD 
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass 
cleaners.
•Slots and openings on the back or top of the cabinet are for ventilation. They must not be 
blocked or covered. Your monitor should never be placed near or over a radiator or heat 
source, or in a built-in installation unless proper ventilation is provided.
•Never push objects or spill liquid of any kind into this product.
Servicing
•Do not attempt to service this product yourself, as opening or removing covers may expose 
you to dangerous voltages or other risks. If any of the above mentioned misuse or other 
accident such as dropping or mishandling occurs, contact qualified service personnel for 
servicing.
 
						

							Table of Contents 3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 4
Getting to know your monitor  ............................................................................................ 6
Front view  ....................................................................................................................6
Back view  .....................................................................................................................6
How to assemble your monitor hardware ........................................................................... 7
Rotating the monitor (optional) ................................................................................. 9
Viewing angle adjustment ......................................................................................... 11
Getting the most from your BenQ monitor ...................................................................... 12
How to install the monitor on a new computer  ...................................................... 13
How to upgrade the monitor on an existing computer  .......................................... 14
How to install on Windows Vista systems  ............................................................... 15
How to install on Windows XP system  .................................................................... 16
Picture optimization ...........................................................................................................17
How to adjust your monitor  .............................................................................................. 18
The control panel  ...................................................................................................... 18
Hot key mode  ............................................................................................................ 19
Main menu mode  ...................................................................................................... 20
Troubleshooting ................................................................................................................. 30
Frequently asked questions (FAQ)  ........................................................................... 30
Need more help?  ........................................................................................................ 31
 
						

							
4  Getting started  
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product 
supplied for your region)
Signal Cable: D-Sub
Signal Cable: DVI-D (optional)
 
						

							
  5
  Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal  for protecting the monitor during transport.
Signal Cable: HDMI (optional)
 
						

							
6  Getting to know your monitor  
2. Getting to know your monitor
Front view
Back view 
1. AC power input jack
2. DVI-D input socket 
3. HDMI input socket
4. D-Sub input socket
Earphone socket
 
						

							
  7
  How to assemble your monitor hardware
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Unpack the monitor and place it on a stable surface.
2. Connect the video cable.
Do not use both DVI-D cable and D-Sub cable on the 
same PC. The only case in which both cables can be 
used is if they are connecte d to two different PCs with 
appropriate video systems. 
Connect one end of the DVI-D cable to the monitor 
DVI-D socket and the other end to the DVI-D port on 
your computer. (optional)
The DVI-D format is used for direct digital connection 
between source video and digital LCD monitors or 
projectors. The digital video signals produce a superior 
quality picture than analog video signals.
Connect the plug of the D-Sub cable (at the end without 
the ferrite filter) to the monitor D-Sub socket. Connect the 
other plug of the D-Sub cable (at the end with the ferrite 
filter) to the computer video D-Sub socket. 
Connect one end of the HDMI cable to the monitor 
HDMI socket and the other end to the HDMI port on 
your HDMI device. (optional)
Tighten all finger screws to prevent the plugs from acci-
dently falling out during use.
Either
Or
Or
 
						

							8  How to assemble your monitor hardware  
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled 
‘POWER IN’ on the rear of the monitor. Do not connect 
the other end to a power outlet just yet. 
4. Route the cables via the cable holder.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the 
front of the monitor. 
Turn on the computer too, and follow the instructions in 
Section 4: 
Getting the most from your BenQ monitor 
on page 12
 to install the monitor software.
 
						

							  9   How to assemble your monitor hardware
Rotating the monitor (optional)
Your LCD monitor also supports portrait viewing orientation, allowing you to fit your specific 
desktop application without needing to scroll down.
Before rotating the display with a portrait viewing orientation, please install the Pivot software 
from the attached CD first.
To install the Pivot software
1. Execute Pivot-Setup.exe from the folder named Pivot on the attached CD.
2. Follow the on-screen instructions to install the software.
3. After restarting your system, you will see a Pivot Software Control icon,  , displaying in 
the system tray. Click on the icon and choose Rotate 90 degrees,  , to pivot the display. 
To cancel this action, choose Rotate 0 degree, .
4. Turn the power off and keep following the steps below.
To rotate the display
1. Fully extend the monitor and tilt it.
Gently lift the display up and extend the stand to the maxi-
mum extended position.
The stand should be vertically extended to allow the 
monitor to rotate from landscape to portrait mode. 
 
						

							
10  How to assemble your monitor hardware  
Then tilt the monitor. 
2. Rotate the monitor 90 degrees clockwise as illustrated. 
To avoid the edge of the LCD display hitting the 
monitor base surface while it  is being rotated, do tilt 
and extend the monitor to the highest position before 
you start to rotate the display.