BenQ G2200wt User Manual

Welcome
G2200WT
22 Wide-Screen LCD Monitor
User Manual
 

2   
Copyright
Copyright © 2010 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

Table of Contents 3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 4
Getting to know your monitor  ............................................................................................ 5
Front view  ....................................................................................................................5
Back view...

4  Getting started  
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
BenQ LCD Monitor
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product 
supplied for your region)
Signal...

  5   Getting to know your monitor
2. Getting to know your monitor
Front view
Back view 
1. AC power input jack
2. DVI-D input socket 
3. D-Sub input socket
 

6  How to assemble your monitor hardware  
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Unpack the monitor and place it on a stable surface.
2. Connect the video cable.
Do not use both DVI-D cable and D-Sub cable on the 
same PC. The only case in which both cables can be 
used is if they are connected to two different PCs with 
appropriate video systems....

  7   How to assemble your monitor hardware
4. Route the cables via the cable holder.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the 
front of the monitor. 
Turn on the computer too, and follow the instructions in 
Section 4: 
Getting the most from your BenQ monitor 
on page 11
 to install the monitor software.
 

8  How to assemble your monitor hardware  
Rotating the monitor (optional)
1. Fully extend the monitor and tilt it.
Gently lift the display up and extend the stand to the maxi-
mum extended position.
The stand should be vertically extended to allow the 
monitor to rotate from landscape to portrait mode. 
Then tilt the monitor. 
 

  9   How to assemble your monitor hardware
2. Rotate the monitor 90 degrees clockwise as 
illustrated. 
To avoid the edge of the LCD display hitting the 
monitor base surface while it is being rotated, do tilt 
and extend the monitor to the highest position before 
you start to rotate the display. 
3. Adjust the monitor to the desired viewing angle.
 

10  How to assemble your monitor hardware  
Viewing angle adjustment
You may position the screen to the desired angle with -2° to +20° monitor tilt, 90° (left and right 
total) monitor swivel, and 130 mm monitor height.