BenQ G2010wa User Manual

							
  31
  Troubleshooting
Is the prompt on the display illuminated in orange?
If the LED is illuminated in orange, the power ma nagement mode is active. Press any button on 
the computer keyboard or move the mouse. If  that does not help, check the signal cable 
connectors. If any pin is bent or broken off, plea se contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the instructions on the link Adjusting the Screen Resolution  on the CD, and then select 
the correct resolution, refresh rate and make adjustments based on these instructions.
You are running the monitor at its native re solution, but the image is still distorted.
Images from different input sources may appear di storted or stretched on the monitor running at 
its native resolution. To have the optimal display performance of each type of input sources, you 
can use the Display Mode functio n to set a proper aspect ratio for the input sources. See 
Display 
Mode on page 26  
for details.
The image is displaced in one direction:
Read the instructions on the link   Adjusting the Screen Resolution  on the CD, and then 
select the correct resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible:
• To unlock the OSD controls when the OSD is pr eset to be locked, press and hold the “MENU” 
key for 15 seconds to enter the “OSD Lock” option and make changes. 
• Alternatively, you may use the 
W or X keys to select “OFF” in the “OSD Lock” submenu 
from the “OSD Settings” menu (under SYSTEM), and all OSD controls will be accessible.
Need more help?
If your problems remain after checking this ma nual, please contact your place of purchase or 
e-mail us at: [email protected]