BenQ G1 User Manual
Have a look at the manual BenQ G1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Working with computer and AV system 81 English To set the printing settings on the specific file: 1. On the PictBridge menu, press or to select Print One and press to select the files that you want to print. 2. Press to enter the printer settings. • Press or to select Copies. Press or to select the file that you want to print and use the wheel dial or press or to specify the number of copies. . • Press or to select Paper Size, and press or to select the desired paper size. • Press or to select Quality, and press or to select the desired print quality. 3. After all settings are complete, press or to select Print and press to start printing. To set the printing settings on the selected files: 1. On the PictBridge menu, press or to select Print Index and press to select the files that you want to print. 2. Press to enter the printer settings. • Press or to select Copies. Use the wheel dial or press or to specify the number of copies. . Slide the Zoom lever to to enable/disable Date Stamp. Slide the Zoom lever to to enable/disable Date Stamp. Copies 153/153 00 Date Stamp On Copies 00 Date Stamp On G1 UM - Without Safety Reg - EN.book Page 81 Wednesday, June 13, 2012 10:39 AM Downloaded From camera-usermanual.com BenQ Manuals
82 Working with computer and AV system English • Press or to select Paper Size, and press or to select the desired paper size. • Press or to select Quality, and press or to select the desired print quality. 3. After all settings are complete, press or to select Print and press to start printing. To set the printing settings on all files: 1. On the PictBridge menu, press or to select Print All and press to select the files that you want to print. 2. Press to enter the printer settings. • Press or to select Copies. Use the wheel dial or press or to specify the number of copies. . • Press or to select Paper Size, and press or to select the desired paper size. • Press or to select Quality, and press or to select the desired print quality. 3. After all settings are complete, press or to select Print and press to start printing. Slide the Zoom lever to to enable/disable Date Stamp. Print All Copies Paper Size Quality Default Default Print Exit G1 UM - Without Safety Reg - EN.book Page 82 Wednesday, June 13, 2012 10:39 AM Downloaded From camera-usermanual.com BenQ Manuals
Working with computer and AV system 83 English To print all files with DPOF tag: 1. On the PictBridge menu, press or to select DPOF. 2. Press to enter the printer settings. • Press or to select Paper Size, and press or to select the desired paper size. • Press or to select Quality, and press or to select the desired print quality. 3. After all settings are complete, press or to select Print and press to start printing. • The above procedure may vary depending on the printer type you are using. • If you connect the camera to your printer while the printer is still starting up, the camera will be automatically turned off. • Failure to follow the above procedure will make the camera show an error message. Please disconnect the camera and the camera will be automatically turned off. DPOF Paper Size Quality Default Default Print Exit G1 UM - Without Safety Reg - EN.book Page 83 Wednesday, June 13, 2012 10:39 AM Downloaded From camera-usermanual.com BenQ Manuals
84 Troubleshooting and service information English Troubleshooting and service information If your camera cannot operate normally, see the frequently encountered problems and solutions listed below. If the problem persists, contact your nearest service center or technical support. ProblemCauseSolution The camera cannot power up.There is no battery or the battery is not inserted correctly.Insert the battery correctly. The battery has no power. Replace the battery. The battery power is draining quickly.The external temperature is extremely low.-- Many shots are being captured in dark places, requiring a flash.-- Continuous video recording. The battery or camera is warm.The camera or flash was used continuously over a long period of time.-- The flash does not fire or recharge.The camera flash is turned off.Set the flash to Auto Flash. The light source is sufficient.-- Even though the flash fired, the image is dark.The distance to the subject is greater than the flashs effective range.Get closer to the subject and shoot. The image is too bright or too dark.The exposure is excessive or inadequate.Reset exposure compensation. G1 UM - Without Safety Reg - EN.book Page 84 Wednesday, June 13, 2012 10:39 AM Downloaded From camera-usermanual.com BenQ Manuals
Troubleshooting and service information 85 English I cannot format a memory card.The memory card is write- protected.Remove the write protection. End of the memory card life.Insert a new memory card. I cannot download images from the camera to my computer.The free space on the hard disk of your computer is insufficient.Ensure that the hard disk has enough space for running Windows and that the drive for loading image files has free space equal to or greater than the memory card in the camera. There is no power being supplied to the camera.Replace the battery. The camera does not shoot even when pressing the shutter.The battery is running low. Replace the battery. The camera is not in the Capture mode.Switch to the Capture mode. The shutter was not pressed all the way down.Press the shutter all the way down. The internal memory or memory card does not have any free space.Load a new card or delete unwanted files. The flash is recharging. Wait until the flash mode icon, indicated on the screen, stops flashing. The camera does not recognize the memory card.Format the memory card before the initial use or before using with another camera. I cannot print images with PictBridge- compliant printers.The camera is connected to the printer when the camera is powered off.Connect the camera to the printer, turn on the camera, and then select Printer. ProblemCauseSolution G1 UM - Without Safety Reg - EN.book Page 85 Wednesday, June 13, 2012 10:39 AM Downloaded From camera-usermanual.com BenQ Manuals
86 Troubleshooting and service information English Technical support For technical assistance, free driver updates, product information, and news releases, visit the following web site: http://www.BenQ.com G1 UM - Without Safety Reg - EN.book Page 86 Wednesday, June 13, 2012 10:39 AM Downloaded From camera-usermanual.com BenQ Manuals
Specifications 87 English Specifications Sensor Panasonic 14 Mega Pixels, 1/2.3 inch High Sensitivity CMOS Zoom Optical: 4.6X Digital: Up to 6X (Preview) / Up to 12X (Playback) Lens f = 4.3 (W) ~ 19.8 (T) mm F= 1.8 (W) ~ 4.9 (T) (f = 24 mm ~ 110 mm, 35 mm equivalent) Focus Range Normal: W = 30 cm ~ Infinity; T = 60 cm ~ Infinity; Macro: 3 cm ~ Infinity LCD 3.0” LCD 920K pixels swivel LCD Image Resolution 14M / 8M / 4M / 2M / VGA / 16:9 Movie Mode FHD 1080p (1920 x 1080) 30fps / HD 720p (1280 x 720) 30fps / VGA (640 x 480) 30fps Continuous recording with sound Slow motion: VGA (640x480) 120fps / HD 720p (1280x720) 60 fps Fast motion: FHD 1080p (1920x1080) 15fps Shutter Speed Auto: 1/2000 ~ 2 sec. Manual mode: 1/2000 ~ 15 sec. White Balance Auto / Daylight / Cloudy / Tungsten / Fluorescent H / Fluorescent L / Manual Exposure -2.0 ~ +2.0 EV (0.3EV / step) ISO Auto / 100 / 200 / 400 / 800 / 1600 / 3200 / 6400 Flash Auto Flash / Auto Anti Red-eye / Forced On / Slow Sync / Forced Off Drive mode Off / 10 sec. / 2 sec. / Smile detection Power Source CIPA approximately 260 (base on bundled Lithium-ion battery) Storage Type Built-in approx. 85MB (+-5%) SD (up to 4GB) / SDHC (up to 32GB) / SDXC (> 32GB) G1 UM - Without Safety Reg - EN.book Page 87 Wednesday, June 13, 2012 10:39 AM Downloaded From camera-usermanual.com BenQ Manuals
88 Specifications English File Format Still Image: JPEG (EXIF 2.3 compatible); DCF compatible; Support DPOF Video: MOV Audio: WAV Sound: Stereo sound Dimensions / Weight114 x 62.5 x 25.5 mm 195g (w/o battery & SD card) Interface Digital output: USB 2.0 compatible Audio / Video output (NTSC/PAL) and HDMI PictBridge compatible Accessories USB Cable / Software & User Manual CD / Quick Guide / USB Adapter / Neck Strap (optional) / Pouch (optional) / Rechargeable Lithium-ion battery / AV cable Available accessories depend on the actual items shipped and may vary from the list above. All information, designs, and specifications are subject to change without prior notice. G1 UM - Without Safety Reg - EN.book Page 88 Wednesday, June 13, 2012 10:39 AM Downloaded From camera-usermanual.com BenQ Manuals