BenQ Fp95g User Manual

  11   Getting the most from your BenQ monitor
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
software on a new computer which has never had a monitor driver installed before. This 
instruction is only suitable for a computer which has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that...

12  Getting the most from your BenQ monitor  
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software 
on your Microsoft Windows computer. It is currently tested as compatible (and recommended 
only) for Windows XP and Windows Vista Operating System (OS). 
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, 
however, as at the time of writing, BenQ has done no...

  13   Getting the most from your BenQ monitor
How to install on Windows Vista systems
1. Open Display Settings.
Right-click the desktop and select Personalize from the popup menu.
Select Display Settings from the Personalize appearance and sounds window. 
The Display Settings window will display.
2. Click the Advanced Settings button. 
The Generic PnP Monitor Properties window will display.
3. Click the Monitor tab and the Properties button.
4. Click Continue in the prompted User Account Control...

14  Getting the most from your BenQ monitor  
How to install on Windows XP system
1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop. 
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel. 
In Windows XP version, Control Panel is located directly under the main Start menu item. 
The menu options displayed will depend upon which type of view is selected for...

  15   How to adjust the screen resolution
5. How to adjust the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. 
The best possible picture for your FP95G is achieved with a resolution of 1280 x 1024. This is 
called “Native Resolution” or maximal resolution – that is, the clearest picture. Lower resolutions 
are displayed on a full screen through an interpolation circuit. Image blurring across pixel 
boundaries can occur with the...

16  How to adjust the screen refresh rate  
6. How to adjust the screen refresh rate 
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not 
technically possible for an LCD display to flicker. The best results are obtained by using the factory 
modes already set in your computer. There is a table with the factory modes in the specification 
section of this User Manual: 
Supported PC Timings on page 33.
You can choose 60, 70 and 75 Hertz, (but not 72Hz) for the...

  17   Picture optimization
7. Picture optimization 
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the i key 
function. Press the 
i key to optimize the currently displayed image to the screen. 
When you connect a digital video output using a digital (DVI) cable to your monitor, the i key and the Auto 
Adjustment function will be disabled, because the monitor will automatically display the best image. 
Please ensure that the connected graphic card on your computer is...

18  How to adjust your monitor  
8. How to adjust your monitor
The control panel
1. “i key”: Adjust vertical position, phase, horizontal position and pixel clock automatically.
2. “MENU” key: Activate OSD main menu and return to the previous menu or exit OSD.
3.
W /Mode key: For Left/Decrease adjustment. The key is the hot key for Mode.
4.  
X /Contrast/Brightness key: For Right/Increase adjustment. The key is the hot key for 
Brightness and Contrast.
5. “ENTER” key: Enter sub menus and select items. The...

  19   How to adjust your monitor
On Screen Display (OSD) menu structure 
DISPLAYAuto Adjustment
H. Position
V.  P o s i t i o n
Pixel Clock
Phase
Red
PICTUREBrightness
Normal Green
Contrast
Bluish Blue
Sharpness
Reddish
Color
User Mode YES
Reset Color NO
PICTURE 
ADVANCEDPicture Mode
Standard
Senseye Demo
Movie
Dynamics
Photo
sRGB
ON
OFF
 SYSTEM
Input
D-sub English
OSD Settings
DVI French
Information
German
Reset All 
Italian
Language
Spanish
H. Position Polish/Japanese
V.  P o s i t i o...

20  How to adjust your monitor  
Hot key mode
The monitor keys perform as hotkeys to provide direct access to particular functions whenever the 
menu isnt currently displaying on-screen.
Brightness and Contrast hot keys
Mode hot key
Input hot keyPress the 
X key to display the Brightness  
and Contrast indicators. Further press the 
the 
W or X keys, then the ENTER key to 
select Brightness or Contrast. The  
X key 
will increase the level, while the 
W key will 
decrease the level.
To exit, press the...