BenQ Fp93vw User Manual

  11
  How to assemble your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the 
power cable. Turn off the computer before unplugging the 
monitor signal cable.
Please be careful to prev ent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or  damage the LCD substrate 
voiding your warranty. Sliding or scraping the monitor 
around on your desk will scratch or...

12  Getting the most from your BenQ monitor  
4. Getting the most from your BenQ monitor
The BenQ LCD monitor you purchased is compatible for Macintosh and Microsoft operating 
systems.
If you are using Windows system, to gain the most benefit from your new BenQ color LCD flat 
screen monitor, you should install the custom Be nQ LCD Monitor driver software as provided on 
the BenQ LCD Monitor CD-ROM.
The circumstances under which you connect and in stall your BenQ LCD Monitor will determine 
which...

  13
  Getting the most from your BenQ monitor
How to install the monitor on a new computer
This instruction details the procedure for select ing and installing the BenQ LCD Monitor driver 
software on a new computer which has never  had a monitor driver installed before. This 
instruction is only suitable for a computer whic h has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer...

14  Getting the most from your BenQ monitor  
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software 
on your Microsoft Windows computer. It is curr ently tested as compatible for Windows XP and 
Windows Vista Operating System (OS). 
The BenQ LCD Monitor driver for your model may well  function perfectly with other versions of Windows, 
however, as at the time of writing, BenQ has done no  testing of this...

  15
  Getting the most from your BenQ monitor
How to install on Windows Vista systems
1. Open  Display Settings .
Right-click the desktop and select  Personalize from the popup menu.
Select  Display Settings  from the Personalize appearance and sounds  window. 
The  Display Settings  window will display.
2. Click the Advanced Settings  button. 
The Generic PnP Monitor Properties  window will display.
3. Click the Monitor tab and the  Properties button.
4. Click  Continue  in the prompted  User Account...

16  Getting the most from your BenQ monitor  
How to install on Windows XP system
1. Open Display Properties .
The quickest shortcut to  Display Properties is through the Windows desktop. 
Right-click the desktop and select  Properties from the popup menu.
Alternatively, the Windows menu to  Display Properties is located in Control Panel . 
In Windows XP version,  Control Panel is located directly under the main  Start menu item. 
The menu options displayed will depend upon which type of view is...

  17
  How to adjust the screen resolution
5. How to adjust the screen resolution
Due to the nature of liquid crystal display (LCD) te chnology, the picture resolution is always fixed. 
The best possible picture for your FP93VW is ac hieved with a resolution of 1440 x 900. This is 
called “Native Resolution” or maximal resolution – that is, the clearest picture. Lower resolutions 
are displayed on a full screen through an interpolation circuit. Image blurring across pixel 
boundaries can occur with the...

18  How to adjust the screen refresh rate  
6. How to adjust the screen refresh rate 
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not 
technically possible for an LC D display to flicker. The best resu lts are obtained by using the factory 
modes already set in your computer. There is a ta ble with the factory modes in the specification 
section of this User Manual: 
Supported PC Timings on page 32
You can choose 60 Hertz for the native resolution of 1440...

  19
  Picture optimization
7. Picture optimization 
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the i  key 
function. Press the 
i  key to optimize the currently displayed image to the screen. 
When you connect a digital video output using  a digital (DVI) cable to your monitor, the i key and the  Auto 
Adjustment  function will be disabled, be cause the monitor will automatica lly display the best image. 
Please ensure that the connected graphic card on your...

20  How to adjust your monitor  
8. How to adjust your monitor
The control pane
1. “Power”: Turn the power on or off.
2. “Enter” key: Enter sub menus and select items. The key is also the hot key for Input.
3.
t (Up) key: For Up/Increase adjustment. The key is also the hot key for Brightness.
4.
u (Down) key: For Down/Decrease adjustment.  The key is also the hot key for Contrast.
5. “Menu/Exit” key: Activate OSD main menu and return to the previous menu or exit OSD.
6. “
i  key”: Adjust vertical...