BenQ Fp93gx User Manual

Welcome
FP93G/FP93GX
LCD Color Monitor
19.0 LCD Panel Size
User’s Manual
 

2   
Copyright
Copyright © 2006 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

Table of Contents 3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 5
Getting to know your monitor  ............................................................................................ 6
Front View  ................................................................................................................... 6
Back View...

Table of Contents 4
 

  5   Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
11
11
BenQ LCD Monitor
 
Quick Start Guide
 
CD-ROM
 
Power Cord
Signal Cable: D-Sub
Signal Cable: DVI-D (optional)
 

6  Getting to know your monitor  
Getting to know your monitor
Front View
Back View 
1. Power AC input jack
2. DVI-D Connector
3. D-Sub Connector
11
12
 

  7   How to install your monitor hardware
How to install your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler 
or a mouse will crack the glass or damage the LCD 
substrate voiding your warranty. Sliding or scraping 
the monitor around on your desk will...

8  How to install your monitor hardware  
2. Connect the video cable.   
Connect one end of the DVI-D cable to the monitor 
DVI-D socket and the other end to the DVI-D port on 
your computer. (optional)
The DVI-D format is used for direct digital connection 
between source video and digital LCD monitors or 
projectors. The digital video signals produce a 
superior quality picture than analog video signals.
Connect the plug of the D-Sub cable (at the end without 
the ferrite filter) to the monitor D-Sub...

  9   How to install your monitor hardware
4. Route the cables via the loose bracket.
Release the cable retaining clip by squeezing the clip 
inwards as illustrated. Position the cables together and 
reinsert the clip over them to retain the cables neatly in 
place behind the monitor stand.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point 
and turn it on.
Turn on the monitor by pressing the power button on the 
front of the monitor. 
Turn on the computer too,...

10  How to install your monitor hardware  
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the 
power cable. Turn off the computer before unplugging the 
monitor signal cable.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler 
or a mouse will crack the glass or damage the LCD 
substrate voiding your warranty. Sliding or scraping 
the monitor around on your desk will scratch or...