BenQ Fp93gs User Manual

							  31   How to adjust your monitor
Language Sets the OSD menu 
language.Press the W or X keys to 
adjust the value.
The language options 
displayed on your OSD 
may differ from those 
shown on the right, 
depending on the product 
supplied in your region.
• English
• French
• German
• Italian
• Spanish
• Polish/
Japanese
• Czech/
Traditional
Chinese
• Hungarian/
Simplified 
Chinese
• Serbo-Croatian
• Romanian
• Dutch
• Russian
• Swedish
• Portuguese
H. Position Adjusts the horizontal 
position of the OSD menu. 
Press the 
W or X keys to 
change the settings. 0 to 100
V. Position Adjusts the vertical 
position of the OSD menu.0 to 100
Display Time Adjusts the display time of 
the OSD menu.• 5 sec.
• 10 sec.
• 15 sec.
• 20 sec.
• 25 sec.
• 30 sec.
 
						

							32  How to adjust your monitor  
OSD Lock Prevents all the monitor 
settings from being 
accidentally changed. 
When this function is 
activated, the OSD 
controls and hotkey 
operations will be 
disabled.Press the W or X keys to 
change the settings. 
To unlock the OSD 
controls when the OSD is 
preset to be locked, press 
and hold the ’ENTER key 
for 15 seconds to enter 
the OSD Lock option and 
make changes. 
Alternatively, you may 
use the W or X keys to 
select ’OFF’ in the OSD 
Lock submenu from the 
’OSD Settings’ menu, and 
all OSD controls will be 
accessible.
• ON
• OFF
Press Exit to leave the OSD Settings menu.
Information Displays the current 
monitor property settings.Press the ENTER key to 
select this option.
Reset All Resets all mode, color and 
geometry settings to the 
factory default values.Press the 
W or X keys to 
change the settings. • Ye s
• No
 
						

							  33   Troubleshooting
9. Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the 
How to adjust the screen resolution on page 17 section, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in the 
How to adjust the screen refresh rate on page 18 section It 
is normal for blurring to occur due to conduction losses in extension cables. You can minimize 
these losses by using an extension cable with better conduction quality or with a built-in booster.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the How to adjust the screen resolution on page 17 section. Select the native resolution.
Pixel errors can be seen:
One of several pixels is permanently black, one or more pixels are permanently white, one or 
more pixels are permanently red, green, blue or another color.
•Clean the LCD screen.
•Cycle power on-off.
•These are pixels that are permanently on or off and is a natural defect that occurs in LCD 
technology.
The image has a faulty coloration:
It has a yellow, blue or pink appearance.
Select ENTER > PICTURE > Color > Reset Color, and then choose “Yes” in the “Caution” 
message box to reset the color settings to the factory defaults. 
If the image is still not correct and the OSD also has faulty coloration, this means one of the three 
primary colors is missing in the signal input. Now check the signal cable connectors. If any pin is 
bent or broken off, please contact your dealer to get necessary support.
No image can be seen:
Is the prompt on the display illuminated in green?
If the LED is illuminated in green and there is a message “Out of Range” on the screen, this means 
you are using a display mode that this monitor does not support, please change the setting to one 
of the supported mode. Please read “
Supported PC Timings on page 35” section.
Faint shadow from the static image displayed is visible on the screen:
•Activate the power management function to let your computer and monitor go into a low 
power sleep mode when not actively in use.
•Use a screensaver to prevent the occurrence of image retention.
Is the prompt on the display illuminated in orange?
 
						

							34 Troubleshooting  
If the LED is illuminated in orange, the power management mode is active. Press any button on 
the computer keyboard or move the mouse. If that does not help, check the signal cable 
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the 
How to adjust the screen resolution on page 17 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the 
How to adjust the screen resolution on page 17 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible:
•To unlock the OSD controls when the OSD is preset to be locked, press and hold the “Enter” 
key for 15 seconds to enter the “OSD Lock” option and make changes. 
•Alternatively, you may use the 
W or X keys to select “OFF” in the “OSD Lock” submenu 
from the “OSD Settings” menu (under SYSTEM), and all OSD controls will be accessible.
Need more help?
If your problems remain after checking this manual, please contact your place of purchase or 
e-mail us at: [email protected]
 
						

							  35   Supported PC Timings
10. Supported PC Timings
•Modes not listed in the table may not be supported. For an optimal picture, we recommended 
you choose a mode listed in the table above.
•There are 22 available modes that are compatible with Windows. 
•Image disruption may occur as a result of signal frequency differences from graphic cards 
which do not correspond with the usual standard. This is not, however, an error. You may 
improve this situation by altering an automatic setting or by manually changing the phase 
setting and the pixel frequency from the “DISPLAY” menu.
•If you switch off the monitor, interference lines can occur on your screen. But do not be 
concerned about this, as it is normal. 
•To extend the service life of the product, we recommend that you use your computers power 
management function. 
Incoming display mode (Input timing)
ResolutionHorizontal 
Frequency (KHz)Ve r t i c a l  
Frequency (Hz)Pixel 
Frequency (MHz)Comment
640x350 31.47(P) 70.08(N) 25.17 DOS
720x400 31.47(N) 70.08(P) 28.32 DOS
640x480 31.47(N) 60.00(N) 25.18 DOS
640x480 35.00(N) 67.00(N) 30.24 Macintosh
640x480 37.86(N) 72.80(N) 31.50 VESA
640x480 37.50(N) 75.00(N) 31.50 VESA
800x600 35.16(P) 56.25(P) 36.00 VESA
800x600 37.88(P) 60.32(P) 40.00 VESA
800x600 48.08(P) 72.19(P) 50.00 VESA
800x600 46.87(P) 75.00(P) 49.50 VESA
832x624 49.72(N) 74.55(N) 57.29 Macintosh
1024x768 48.36(N) 60.00(N) 65.00 VESA
1024x768 56.48(N) 70.10(N) 75.00 VESA
1024x768 60.02(P) 75.00(P) 78.75 VESA
1152x864 67.50(P) 75.00(P) 108.00 VESA
1152x870 68.68(N) 75.06(N) 100.00 Macintosh
1152x900 61.80(N) 66.00(N) 94.50 SUN 66
1152x900 71.81(N) 76.14(N) 108.00 SUN
1280x1024 64.00(P) 60.00(P) 108.00 VESA
1280x1024 75.83(N) 71.53(N) 128.00 IBMI
1280x1024 80.00(P) 75.00(P) 135.00 VESA
1280x1024 81.18(N) 76.16(N) 135.09 SPARC2
 
						

							36 Specifications  
11. Specifications
BenQ FP93G S
ModelFP93G S
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time* 
Viewing angle (left/right, up/down) 19.0” , active, TFT
480 mm
1,280 x 1,024
16.7 million
800:1 / 300 cd/m
2
5 ms 
160, 160 (CR>
10)
Line frequency 
Image frequency31 - 83 kHz Multi- frequency monitor
50 - 76 Hz modes within these parameters
Image diagnostics
Controls 
FunctionsDigital, OSD Technology, i key (automatic image 
setting) 
5 buttons and i key.
Contrast, brightness, vert. & hor. image position, 
phase, pixel clock, color balance, color palette, 
multiple-language OSD, OSD position, status 
indicator, input selection, picture mode, Senseye 
demo
Power management
Max. power consumption 
Power saving modeVESA DPMS, EPA
40 Watt
< 1 Watt
Input signal 
SynchronizationRGB analog 0.7 Vpp/75 Ohm positive 
Digital: DVI-D (optional)
TTL separate signal connection 15-pin mini D-sub 
cable 
Temperature (operating) 
Air humidity (operating)0 °C - 40 °C
10% - 90%
Certifications TCO 03, TÜV/Ergonomics, TÜV/ GS, FCC Class 
B, ISO 13406-2, VCCI, CB Report, CE, C-Tick, 
BSMI, Fimko, GOST, CSA, CCC
 
						

							  37   Specifications
*Response Time: The time it takes to switch a pixel off and then on and then off again (or from black to 
white and back to black). A low response time is desirable for the display of moving images without 
ghosting. The Response Time quoted for many LCD monitors is specific to transitions from black to white 
and back again, it does not specify the time required to switch between the many gray levels or colors that 
make up an image.
Operating voltage 
Dimensions (H x W x D) 
WeightAutomatic switched mode power supply, 
100-240 V, 50-60 Hz
410.1 x 404.2 x 168.2 mm
5.0 kg
 
						

							38 Specifications  
BenQ FP93G P
ModelFP93G P
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time* 
Viewing angle (left/right, up/down) 19.0” , active, TFT
480 mm
1,280 x 1,024
16.7 million
1300:1 / 300 cd/m
2
20 ms (Ton+Toff)
8 ms (GTG*)
178, 178 (CR>
10)
Line frequency 
Image frequency31 - 83 kHz Multi- frequency monitor
50 - 76 Hz modes within these parameters
Image diagnostics
Controls 
FunctionsDigital, OSD Technology, i key (automatic image 
setting) 
5 buttons and i key.
Contrast, brightness, vert. & hor. image position, 
phase, pixel clock, color balance, color palette, 
multiple-language OSD, OSD position, status 
indicator, input selection, picture mode, Senseye 
demo
Power management
Max. power consumption 
Power saving modeVESA DPMS, EPA
40 Watt
< 1 Watt
Input signal 
SynchronizationRGB analog 0.7 Vpp/75 Ohm positive 
Digital: DVI-D (optional)
TTL separate signal connection 15-pin mini D-sub 
cable 
Temperature (operating) 
Air humidity (operating)0 °C - 40 °C
10% - 90%
Certifications TCO 03, TÜV/Ergonomics, TÜV/ GS, FCC Class 
B, ISO 13406-2, VCCI, CB Report, CE, C-Tick, 
BSMI, Fimko, GOST, CSA, CCC
Operating voltage 
Dimensions (H x W x D) 
WeightAutomatic switched mode power supply, 
100-240 V, 50-60 Hz
410.1 x 404.2 x 168.2 mm
5.0 kg
 
						

							  39   Specifications
*Response Time: The time it takes to switch a pixel off and then on and then off again (or from black to 
white and back to black). A low response time is desirable for the display of moving images without 
ghosting. The Response Time quoted for many LCD monitors is specific to transitions from black to white 
and back again, it does not specify the time required to switch between the many gray levels or colors that 
make up an image.
*Gray to Gray or GTG Response Time: “Real world” video content contains a combination of grayscale 
images. It generally takes longer for a pixel to transition to an intermediate level of intensity (i.e. a gray or 
color level) than it does for it to turn completely black or completely white. For example the “Gray to Gray 
response time” of an LCD panel may generally be 30 to 40 ms while the “Response Time” is 12 ms.