BenQ Fp93g User Manual

							  11   How to install your monitor hardware
Using the Monitor Wall Mounting Kit 
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the 
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit, please 
read the precautions carefully.
Precautions:
•Install your monitor and monitor mounting kit on a wall with flat surface.
•Ensure that the wall material is stable to support the weight of the monitor.
•Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor base.
Lay the screen face down on a clean and well-padded sur-
face. Detach the monitor base as instructed in “
How to 
detach the stand base
.”
2. Remove the monitor stand.
Use a a cross-pointed screwdriver to release the screws that 
fixing the monitor stand to the monitor.
The use of a magnetic-head screwdriver is 
recommended to avoid of losing the screws.
Then pull the monitor stand backward away from the 
monitor.
In case you intend to use your monitor on the stand 
in the future, please keep the monitor base, monitor 
stand, and screws somewhere safe for future use.
 
						

							12  How to install your monitor hardware  
To attach the rear cover: 3. Remove the rear cover.
Pull around the edge of the rear cover and slightly lift it to 
reveal the screw plate at the back of the monitor.
4. Follow the instruction manuals of the wall mount 
bracket you purchased to complete the installation.
1. Tilt the rear cover forward and insert the two tabs on 
the front edge into the recesses of the screw plate.
No tools are required. 
2. Position the two tabs on left side of the rear cover to 
fit into the grooves in the screw plate. 
3. Push the other two tabs on the right side of the rear 
cover inward so that they could snap into the aligned 
grooves. 
There will be a clicking sound as the rear cover is 
perfectly attached.
 
						

							  13   Getting the most from your BenQ monitor
Getting the most from your BenQ monitor
How do I gain the most benefit from my new monitor?
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install 
the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor 
CD-ROM. 
The circumstances under which you connect and install your BenQ LCD Monitor will determine 
which process you need to follow to successfully install the BenQ LCD Monitor driver software. 
These circumstances relate to which version of Microsoft Windows you are using, and whether 
you are connecting the monitor and installing the software onto a new computer (without 
existing monitor driver software), or whether you are upgrading an existing installation (which 
already has existing monitor driver software) with a newer monitor. 
In either case however, the very next time you turn on your computer (after connecting the 
monitor to your computer), Windows will automatically recognise the new (or different) 
hardware, and will launch its Found New Hardware wizard. 
Follow the wizard instructions until it asks you to select a monitor model. At that point, click the 
Have Disk button, insert the BenQ LCD Monitor CD-ROM and select the appropriate monitor 
model. Further details and step-by-step instructions for both an automatic (new) or upgrade 
(existing) installation follow. See:
•How to install the monitor on a new computer. 
•How to upgrade the monitor on an existing computer 
If you require a User Name and Password to login to your Windows computer, you must be 
logged on as an Administrator or as a member of the Administrators group in order to install 
the monitor driver software. Furthermore, if your computer is connected to a network which 
has security access requirements, network policy settings may prevent you from installing 
software on your computer.
11
14
 
						

							14  Getting the most from your BenQ monitor  
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
software on a new computer which has never had a monitor driver installed before. This 
instruction is only suitable for a computer which has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another 
monitor connected to it (and has monitor driver software installed), you should not be 
following these instructions. You should instead be following the instructions for How to 
upgrade the monitor on an existing computer.
1. Follow the instructions in How to install your monitor hardware. 
When Windows (2000 or later) starts, it will automatically detect the new monitor and launch the 
Found New Hardware Wizard. Follow the prompts until it displays the option to Install Hardware 
Device drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device option, and click Next.
4. Check the option for CD-ROM drives (uncheck all others) and click Next.
5. Look to confirm that the wizard has selected the correct name of your monitor as “BenQ 
FP93G/FP93GX” and click Next.
6. Click Finish.
7. Restart the computer.
 
						

							  15   Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software 
on your Microsoft Windows computer. It is currently tested as compatible (and recommended 
only) for Windows 98, Windows ME, Windows 2000, and Windows XP Operating System (OS). 
The BenQ LCD Monitor driver for your model may well function perfectly with other versions 
of Windows, however, as at the time of writing, BenQ has done no testing of this driver on 
other versions of Windows and cannot guarantee its operation on those systems.
Installing monitor driver software involves selecting an appropriate information file (.inf ) on the 
BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and letting 
Windows install the corresponding driver files from the CD. You need only steer it in the right 
direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide you 
through the file selection and installation process. 
See:
•How to install on Windows XP systems.
•How to install on Windows 2000, ME, & 98 systems.
 
						

							16  Getting the most from your BenQ monitor  
How to install on Windows XP systems
1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop. 
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel. 
In Windows XP version, Control Panel is located directly under the main Start menu item. 
The menu options displayed will depend upon which type of view is selected for your system. 
•Under the Classic view, click Start | Control Panel | Display.
•Under the Category view, click Start | Control Panel | Appearance and Themes | Change the 
screen resolution.
The Display Properties window will display.
2. Click the Settings tab and the Advanced button. 
The Advanced Display Properties window will display.
3. Click the Monitor tab and select the ‘Plug and Play Monitor’ from the list.
If there is only one monitor in the list, it will already be selected for you.
4. Click the Properties button. 
The Monitor Properties window will display. 
If the driver provider is listed as BenQ, and the model matches that of your new monitor, the proper 
drivers are already installed, and you need do nothing further. Cancel out of these property windows.
However, if BenQ is not listed as the manufacturer, or the correct model is not currently shown, you 
will need to continue with these instructions.
5. Click the Driver tab and the Update Driver button.
The Hardware Update Wizard will display. Follow the wizard instructions noting the steps below:
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer you attached the 
monitor to.
7. Check the option ‘Install from a list or specific location’ and click Next.
8. Check the option ‘Search for the best driver in these locations’ and also 
check ‘Search removable media’, then click Next.
Please wait while the wizard searches for drives and the BenQ LCD Monitor CD inserted in step 6. 
When complete, the wizard should have found and selected the BenQ driver on the CD appropriate to 
your monitor model, in this case ‘BenQ FP93G/FP93GX’ in the location 
‘d:\driver\BenQFP93G.inf/BenQFP93GX.inf ’ or similar. 
The drive letter for your CD drive may differ from the example above depending upon your 
system – it may be ‘D:’ or ‘E:’ or ‘F:’ etc.
9. Select (single-click) the file named ‘BenQ FP93G/FP93GX’ on the CD, and click the Next 
button.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Finish.
This will close the wizard and return you to the Monitor Properties window, now renamed BenQ 
FP93G/FP93GX Properties.
11. Click Close, OK, and OK.
 
						

							  17   Getting the most from your BenQ monitor
This will close the Display Properties windows. You do not need to restart Windows XP, as the BenQ 
LCD monitor drivers will operate immediately with no further action required by you. 
 
						

							18  Getting the most from your BenQ monitor  
How to install on Windows 2000, ME, & 98 systems
You do not need to follow this instruction if you are installing onto a computer which has a 
Windows XP (or later) version system. In that case, see the instructions at How to install on 
Windows XP systems.
1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop. 
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel.
In Windows 2000, ME, & 98 versions, Control Panel is located under the Settings menu item. 
Click Start | Settings | Control Panel | Display.
The Display Properties window will display.
2. Click the Settings tab and the Advanced button. 
The Advanced Display Properties window will display.
3. In Windows 2000, click the Monitor tab and the Properties button. 
The Monitor Properties window will display.
Alternatively, on Windows ME or 98, click the Monitor tab and the Change button.
This will jump you directly to the Upgrade Device Driver Wizard, skipping the next step.
4. In Windows 2000, click the Driver tab and the Update Driver button. 
The Upgrade Device Driver Wizard will display.
See How to complete the Windows Upgrade Device Driver Wizard.
 
						

							  19   Getting the most from your BenQ monitor
How to complete the Windows Upgrade Device Driver Wizard
1. Load the BenQ LCD Monitor CD-ROM which came with your monitor.
Insert the CD-ROM into a CD drive on the computer you attached the monitor to.
The autorun User’s Guide language selection page will display in your web browser. 
You can select a language and view the online version of this manual from the next window. 
You could then print it out for reference if you wish to work off-line. When you’re ready, Cancel the 
browser as it is not required for the Windows Upgrade Device Driver Wizard.
2. Launch the Windows Upgrade Device Driver Wizard and click Next.
For instructions, see How to install on Windows 2000, ME, & 98 systems.
3. Check the option ‘Display a list of known drivers...’ and click Next.
4. Click the Have Disk button.
The Install From Disk window will display.
5. Click the Browse button and navigate to the BenQ LCD Monitor CD-ROM.
This is the CD you loaded in step 1 above. The CD Drive will have a Windows designated drive letter 
(like D: or E: or F:). Select the drive letter corresponding to the drive you put the CD into.
6. Double-click the folder labelled ‘Driver’.
The contents of the ‘Driver’ folder will display.
7. Click the Open button.
This will return you to the Install from Disk window, and it will have entered the address to the BenQ 
LCD Monitor CD ‘Driver’ folder into the field titled ‘Copy manufacturer’s files from:’.  
The field will contain something like D:\Driver, or E:\Driver, or F:\Driver.
8. Click the OK button.
This will return you to the Upgrade Device Driver Wizard.
9. Select (single-click) the file named BenQ FP93G/FP93GX, and click the Next button.
10. Click Next.
This will copy the appropriate monitor driver files to your computer.
11. Click Finish.
On Windows 2000, this will close the wizard and return you to the Monitor Properties window, now 
renamed ‘BenQ FP93G/FP93GX Properties’.
Alternatively, on Windows ME and 98, this will return you to the Advanced Display Properties 
window, skipping the next step. 
Should you wish to do so, this is where you can change the screen refresh rate and other monitor 
properties to suit your needs. See How to adjust the screen refresh rate for details.
12. In Windows 2000, click Close.
This will close the BenQ FP93G/FP93GX Properties window and return you to the Advanced Display 
Properties window. 
Should you wish to do so, this is where you can change the screen refresh rate and other monitor 
properties to suit your needs. See How to adjust the screen refresh rate for details.
13. In Windows 2000, click OK, or in Windows 98 or ME, click Close. 
This will close the Advanced Display Properties window, and return you to the Display Properties 
window. 
 
						

							20  Getting the most from your BenQ monitor  
Should you wish to do so, this is where you can change the screen resolution (area and color). 
See How to adjust the screen resolution for details.
14. Click OK.
This will close the Display Properties window, and if you made any changes to the screen resolution, 
Windows 2000 will prompt you for confirmation to effect the changes, and further confirmation to 
accept the changes. Click OK and Ye s respectively. 
Alternatively, Windows ME or 98 will ask you if want to make the changes and reboot or not reboot. 
You should select the reboot option as this causes Windows to load the new drivers when it next 
restarts.