BenQ Fp93g User Manual

  21   How to adjust the screen resolution
How to adjust the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always 
fixed. The best possible picture for your FP93G/FP93GX is achieved with a resolution of 
1280x1024. This is called “Native Resolution” or maximal resolution – that is, the clearest picture. 
Lower resolutions are displayed on a full screen through an interpolation circuit. However flaws 
do occur with the interpolated resolution....

22  How to adjust the screen refresh rate  
How to adjust the screen refresh rate 
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not 
technically possible for an LCD display to flicker. The best results are obtained by using the 
factory modes already set in your computer. There is a table with the factory modes in the 
specification section of this User’s Manual. 
You can choose 60, 70 and 75 Hertz, (but not 72Hz) for the native resolution of 1280x1024. 
1....

  23   How to set the picture optimization
How to set the picture optimization 
The easiest way to obtain an optimal display is to use the i key function. Press the i key to 
optimize and adjust the screen settings automatically for you. Refer to How to adjust your 
monitor for button locations and functionality. 
If you wish to, you can always adjust the screen settings manually using the buttons on the 
monitor panel. To assist you in this endeavour, BenQ has provided a screen test image utility 
which...

24  How to adjust your monitor  
How to adjust your monitor
A Look at the Control Panel
There are 6 keys for user’s control including “iKey”, “Exit”, “Enter”, “” key and a power 
switch. The following descriptions are the introduction of these keys & switch.
1. “
iKey”: Adjust vertical position, phase, horizontal position and pixel clock automatically.
2. “Exit” key: Back to previous menu or exit OSD. This key is also the hot key for Input Select.
3.
W (Left) key: For Left/Decrease adjustment. Left key...

  25   How to adjust your monitor
Hot Key Mode
Brightness hot key and Contrast hot key 
Input Select hot key
Main Menu Mode
Control Functions Available in Main Menu Press the 
X key to enter the Brightness menu. 
Further press the 
W or X keys to adjust the 
degree of screen brightness and press the Exit 
key to exit OSD. 
Press the 
W key to enter the Contrast menu. 
Further press the 
W or X keys to adjust the 
degree of screen contrast and press the Exit key 
to exit OSD. 
Press the Exit key to enter...

26  How to adjust your monitor  
Luminance sub menu
Press the W or X keys to adjust the degree of 
Brightness.
Press the Exit key to return to previous menu. 
Press the 
W or X keys to adjust the degree of 
Contrast.
Press the Exit to return to previous menu.
 

  27   How to adjust your monitor
       
Geometry sub menu
Press the 
W or X keys to adjust the display 
Horizontal Position.
Press the Exit key to return to previous menu.
Press the 
W or X keys to adjust the display 
Vertical Position.
Press the Exit key to return to previous menu.
.
Press the 
W or X key to adjust the monitor 
Pixel Clock.
Press the Exit key to return to previous menu.
Press the 
W or X keys to adjust the degree of 
screen display Phase.
Press the Exit key to return to previous menu.
 

28  How to adjust your monitor  
Color sub menu
Bluish    - applies a cool tint to the image and is factory pre-set to the PC industry standard white 
color.
Reddish - applies a warm tint to the image and is factory pre-set to the news print standard white 
color.
Normal  - allows video and still photographs to be viewed with natural coloring. This is the factory 
default color.
User Preset:
User Preset is provided so you can tailor the 
image color tint to suit your liking. The blend of 
the Red, Green...

  29   How to adjust your monitor
 
OSD sub menu
Press the W or X keys to adjust the Horizontal 
Position of the OSD.
Press the Exit key to return to previous menu.
Press the
W or Xkeys to adjust the Vertical 
Position of the OSD.
Press the Exit key to return to previous menu.
Press the
W or X keys to adjust the display 
time of the OSD.
Press the Exit key to return to previous menu.
 

30  How to adjust your monitor  
Languages Sub menu
Press the 
W or X keys to select a language to have the OSD display menus in that language.
Press the Exit key to return to previous menu.
Picture may differ from the Language menu on your monitor, depending on the product 
supplied in your region.