BenQ Fp92w User Manual

1. 
Welcome
FP92W
19 Wide-Screen LCD Monitor
User Manual
 

2   
1. Copyright
Copyright © 2006 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
2. Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with...

Table of Contents 3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 4
Getting to know your monitor  ............................................................................................ 6
Front view  ....................................................................................................................6
Back view...

4  Getting started  
1. Getting started
Your FP92W will provide the optimal display performance of the video resolution standard of 
1440 x 900. Please ensure that your graphic card supports the resolution of 1440 x 900. 
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Quick Start Guide
 
CD-ROM
 
Power Cord
Signal Cable: D-Sub
 

  5   Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Signal Cable: DVI-D (optional)
 

6  Getting to know your monitor  
2. Getting to know your monitor
Front view
Back view
1. Power AC input jack
2. DVI-D input socket
3. D-Sub input socket
 

  7   Getting to know your monitor
Left-side view
1. Power
2. Enter
3. 
t / Brightness
4.
u/ Contrast 
5. MENU
6. Input
7. 
i Key 
 

8  How to assemble your monitor hardware  
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate 
voiding your warranty. Sliding or scraping the monitor 
around on your desk...

  9   How to assemble your monitor hardware
2. Connect the PC video cable.   
Do not use both DVI-D cable and D-Sub cable on the 
same PC. The only case in which both cables can be 
used is if they are connected to two different PCs with 
appropriate video systems. 
Connect one end of the DVI-D cable to the monitor 
DVI-D socket and the other end to the DVI-D port on 
your computer. (optional)
The DVI-D format is used for direct digital connection 
between source video and digital LCD monitors or...

10  How to assemble your monitor hardware  
4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip 
inwards as illustrated. Position the cables together and 
reinsert the clip over them to retain the cables neatly in 
place behind the monitor stand.
5. Connect the power cable to a wall power outlet and 
press Power on the monitor.
Plug the other end of the power cord into a power outlet 
and turn it on.
Turn on the monitor by pressing the power button located 
at...