BenQ Fp91g User Manual
Have a look at the manual BenQ Fp91g User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Troubleshooting The image is distorted, flashes or flickers: Read the How to adjust the screen resolution section and then select the correct resolution, refresh rate and make adjustments based on these instructions. The image is displaced in one direction: Read the How to adjust the screen resolution section and then select the correct resolution, refresh rate and make adjustments based on these instructions.. Need More Help? If your problems remain after checking this manual, please contact your place of purchase or e-mail us at: [email protected]
32 Supported operating modes Supported operating modes •Modes not listed in the table may not be supported. For an optimal picture, we recommended you choose a mode listed in the table above. •There are 22 available modes that are compatible with Windows. •Image disruption may occur as a result of signal frequency differences from VGA cards which do not correspond with the usual standard. This is not, however, an error. You may improve this situation by altering an automatic setting or by manually changing the phase setting and the pixel frequency from the “Geometry” menu. •If you switch off the monitor, interference lines can occur on your screen. But do not be concerned about this, as it is normal. •To extend the service life of the product, we recommend that you use your computers power management function. 11 110 Incoming display mode (Input timing) ResolutionHorizontal Frequency (KHz)Ve r t i c a l Frequency (Hz)Pixel Frequency (MHz)Comment 640x350 31.47(P) 70.08(N) 25.17 DOS 720x400 31.47(N) 70.08(P) 28.32 DOS 640x480 31.47(N) 60.00(N) 25.18 DOS 640x480 35.00(N) 67.00(N) 30.24 Macintosh 640x480 37.86(N) 72.80(N) 31.50 VESA 640x480 37.50(N) 75.00(N) 31.50 VESA 800x600 35.16(P) 56.25(P) 36.00 VESA 800x600 37.88(P) 60.32(P) 40.00 VESA 800x600 48.08(P) 72.19(P) 50.00 VESA 800x600 46.87(P) 75.00(P) 49.50 VESA 832x624 49.72(N) 74.55(N) 57.29 Macintosh 1024x768 48.36(N) 60.00(N) 65.00 VESA 1024x768 56.48(N) 70.10(N) 75.00 VESA 1024x768 60.02(P) 75.00(P) 78.75 VESA 1152x864 67.50(P) 75.00(P) 108.00 VESA 1152x870 68.68(N) 75.06(N) 100.00 Macintosh 1152x900 61.80(N) 66.00(N) 94.50 SUN 66 1152x900 71.81(N) 76.14(N) 108.00 SUN 1280x1024 64.00(P) 60.00(P) 108.00 VESA 1280x1024 75.83(N) 71.53(N) 128.00 IBMI 1280x1024 80.00(P) 75.00(P) 135.00 VESA 1280x1024 81.18(N) 76.16(N) 135.09 SPARC2
33 Specifications Specifications BenQ FP91G 11 111 ModelFP91G Display type Viewable diagonal Native (maximum) resolution Colors Contrast / Brightness Response time Viewing angle (left/right, up/down) 19.0 , active, TFT 480 mm 1,280X1,024 16.2 million 450:1 / 250 cd/m 2 12 ms 140, 135 (CR=10) 160, 160 (CR=5) Line frequency Image frequency31 - 81 kHz Multi- frequency monitor 56 - 76 Hz modes within these parameters Image checks Controls FunctionsDigital, OSD Technology, i key (automatic image setting) 5 buttons and i key. Contrast, brightness, vert. & hor. image position, phase, pixel clock, color balance, color palette, choice of language (8 language OSD), OSD position, status indicator Power Management Max. power consumption Power saving modeVESA DPMS, EPA 40 Watt < 1 Watt, 120 V < 2 Watt, 240 V Input signal PC SynchronisationRGB analog 0.7 Vpp/75 Ohm positive Digital: DVI-D (optional) TTL separate signal connection 15-pin mini D-sub cable Temperature (operating) Air humidity (operating)0 °C - 40 °C 10% - 90% Certifications TCO 03, TÜV/Ergonomics, TÜV/ GS, FCC Class B, ISO 13406-2, VCCI, CB Report, CE, C-Tick, BSMI, Fimko, GOST, CSA US, CCC
34 Specifications Operating voltage Dimensions (H x W x D) WeightAutomatic switched mode power supply, 90-264 V, 47-63 Hz 410.1 x 422.2 x 168 mm 5.1 kg
35 Specifications BenQ FP91G+ ModelFP91G+ Display type Viewable diagonal Native (maximum) resolution Colors Contrast / Brightness Response time Viewing angle (left/right, up/down) 19.0 , active, TFT 480 mm 1,280X1,024 16.2 million 550:1 / 250 cd/m 2 8 ms 140, 135 (CR=10) 160, 160 (CR=5) Line frequency Image frequency31 - 81 kHz Multi- frequency monitor 56 - 76 Hz modes within these parameters Image checks Controls FunctionsDigital, OSD Technology, i key (automatic image setting) 5 buttons and i key. Contrast, brightness, vert. & hor. image position, phase, pixel clock, color balance, color palette, choice of language (8 language OSD), OSD position, status indicator Power Management Max. power consumption Power saving modeVESA DPMS, EPA 40 Watt < 1 Watt, 120 V < 2 Watt, 240 V Input signal PC SynchronisationRGB analog 0.7 Vpp/75 Ohm positive Digital: DVI-D (optional) TTL separate signal connection 15-pin mini D-sub cable Temperature (operating) Air humidity (operating)0 °C - 40 °C 10% - 90% Certifications TCO 03, TÜV/Ergonomics, TÜV/ GS, FCC Class B, ISO 13406-2, VCCI, CB Report, CE, C-Tick, BSMI, Fimko, GOST, CSA US, CCC
36 Specifications Operating voltage Dimensions (H x W x D) WeightAutomatic switched mode power supply, 90-264 V, 47-63 Hz 410.1 x 422.2 x 168 mm 5.1 kg
37 Specifications BenQ FP91G+u ModelFP91G+u Display type Viewable diagonal Native (maximum) resolution Colors Contrast / Brightness Response time Viewing angle (left/right, up/down) 19.0 , active, TFT 480 mm 1,280X1,024 16.7 million 800:1 / 300 cd/m 2 5 ms 160, 160 (CR=10) 170, 170 (CR=5) Line frequency Image frequency 31 - 81 kHz Multi- frequency monitor 56 - 76 Hz modes within these parameters Image checks Controls Functions Digital, OSD Technology, i key (automatic image setting) 5 buttons and i key . Contrast, brightness, ve rt. & hor. image position, phase, pixel clock, color balance, color palette, choice of language (8 language OSD), OSD position, status indicator Power Management Max. power consumption Power saving mode VESA DPMS, EPA 40 Watt < 1 Watt, 120 V < 2 Watt, 240 V Input signal PC Synchronisation RGB analog 0.7 Vpp/75 Ohm positive Digital: DVI-D (optional) TTL separate signal connection 15-pin mini D-sub cable Temperature (operating) Air humidity (operating) 0 °C - 40 °C 10% - 90% Certifications TCO 03, TÜV/Er gonomics, TÜV/ GS, FCC Class B, ISO 13406-2, VCCI, CB Report, CE, C-Tick, BSMI, Fimko, GOST, CSA US, CCC
38 Specifications Operating voltage Dimensions (H x W x D) WeightAutomatic switched mode power supply, 90-264 V, 47-63 Hz 410.1 x 422.2 x 168 mm 5.1 kg