BenQ Fp73e User Manual

Welcome
FP73E
LCD Color Monitor
17.0 LCD Panel Size
User Manual
 

2   
Copyright
Copyright © 2006 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

Table of Contents 3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 4
Getting to know your monitor  ............................................................................................ 6
Front view  ....................................................................................................................6
Back view...

4  Getting started  
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
BenQ LCD Monitor
 
Quick Start Guide
 
CD-ROM
 
Power Cord
Signal Cable: D-Sub
Signal Cable: DVI-D (optional)
 

  5   Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Audio Cable
 

6  Getting to know your monitor  
2. Getting to know your monitor
Front view
Back view 
1. Audio cable socket
2. Power AC input jack
3. DVI-D input socket
4. D-Sub input socket
Earphone socket
 

  7   How to assemble your monitor hardware
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Unpack the monitor and place the monitor on the 
desk as illustrated before you cut the retaining strap.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD...

8  How to assemble your monitor hardware  
3. Connect the PC video cable.
Do not use both DVI-D cable and D-Sub cable on the 
same PC. The only case in which both cables can be 
used is if they are connected to two different PCs with 
appropriate video systems. 
Connect one end of the DVI-D cable to the monitor 
DVI-D socket and the other end to the DVI-D port on 
your computer. (optional)
The DVI-D format is used for direct digital connection 
between source video and digital LCD monitors or...

  9   How to assemble your monitor hardware
5. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled 
‘POWER IN’ on the rear of the monitor. Do not connect 
the other end to a power point just yet. 
6. Turn on the power.
Plug the other end of the power cord into a power point 
and turn it on.
Turn on the monitor by pressing the power button on the 
front of the monitor. 
Turn on the computer too, and follow the instructions in 
Section 4: 
Getting the most from...

10  How to assemble your monitor hardware  
Viewing angle adjustment
You may position the screen to the desired angle with -5° to  +20° monitor tilt, 360° monitor 
swivel, and 72 mm monitor height.
Storing the monitor 
If you need to store your monitor for an extended period of time, please unplug your monitor 
from the electric outlet and all connected cables before any action is taken. It is recommended to 
pack the monitor in its original equipment.
To pack the display itself
Hold the monitor base...