BenQ Fp71g User Manual

							31 Supported operating modes  
Supported operating modes
•Modes not listed in the table may not be supported. For an optimal picture, we recommended you 
choose a mode listed in the table above.
•There are 22 available modes that are compatible with Windows. 
•Image disruption may occur as a result of signal frequency differences from VGA cards which do 
not correspond with the usual standard. This is not, however, an error. You may improve this 
situation by altering an automatic setting or by manually changing the phase setting and the pixel 
frequency from the “Geometry” menu.
•If you switch off the monitor, interference lines can occur on your screen. But do not be concerned 
about this, as it is normal. 
•To extend the service life of the product, we recommend that you use your computers power 
management function. 
11
110
Incoming display mode (Input timing)
ResolutionHorizontal 
Frequency (KHz)Ve r t i c a l  
Frequency (Hz)Pixel 
Frequency (MHz)Comment
640x350 31.47(P) 70.08(N) 25.17 DOS
720x400 31.47(N) 70.08(P) 28.32 DOS
640x480 31.47(N) 60.00(N) 25.18 DOS
640x480 35.00(N) 67.00(N) 30.24 Macintosh
640x480 37.86(N) 72.80(N) 31.50 VESA
640x480 37.50(N) 75.00(N) 31.50 VESA
800x600 35.16(P) 56.25(P) 36.00 VESA
800x600 37.88(P) 60.32(P) 40.00 VESA
800x600 48.08(P) 72.19(P) 50.00 VESA
800x600 46.87(P) 75.00(P) 49.50 VESA
832x624 49.72(N) 74.55(N) 57.29 Macintosh
1024x768 48.36(N) 60.00(N) 65.00 VESA
1024x768 56.48(N) 70.10(N) 75.00 VESA
1024x768 60.02(P) 75.00(P) 78.75 VESA
1152x864 67.50(P) 75.00(P) 108.00 VESA
1152x870 68.68(N) 75.06(N) 100.00 Macintosh
1152x900 61.80(N) 66.00(N) 94.50 SUN 66
1152x900 71.81(N) 76.14(N) 108.00 SUN
1280x1024 64.00(P) 60.00(P) 108.00 VESA
1280x1024 75.83(N) 71.53(N) 128.00 IBMI
1280x1024 80.00(P) 75.00(P) 135.00 VESA
1280x1024 81.18(N) 76.16(N) 135.09 SPARC2
 
						

							  32   Specifications
Specifications
BenQ FP71G
11
111
ModelFP71G
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time 
Viewing angle (left/right, up/down) 17.0 , active, TFT
43.2 cm
1,280X1,024
16.2 million
500:1 / 260 cd/m
2
12 ms
140, 130 (CR=10)
160, 160 (CR=5)
Line frequency 
Image frequency30 - 83 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image checks 
Controls 
FunctionsDigital, OSD Technology, i key 
(automatic image setting) 
5 buttons and i key.
Contrast, brightness, vert. & hor. image position, 
phase, pixel clock, color balance, color palette, 
choice of language (8 language OSD), OSD 
position, status indicator
Power Management
Max. power consumption 
Power saving modeVESA DPMS, EPA
40 Watt
< 1 Watt
Input signal 
SynchronisationRGB analog 0.7 Vpp/75 Ohm positive 
TTL separate signal connection 15-pin mini D-sub 
cable 
Temperature (operating) 
Air humidity (operating)0 °C - 40 °C
10% - 90%
Certifications TCO 03, TÜV/Ergonomics, TÜV/ GS, FCC Class 
B, ISO 13406-2, VCCI, CB Report, CE, C-Tick, 
BSMI, Fimko, GOST, CSA
US, CCC
Operating voltage 
Dimensions (H x W x D) 
WeightAutomatic switched mode power supply, 
90-264 V, 47-63 Hz
362 x 378 x 135 mm
3.8 kg
 
						

							33 Specifications  
BenQ FP71G+
ModelFP71G+
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time 
Viewing angle (left/right, up/down) 17.0 , active, TFT
43.2 cm
1,280X1,024
16.2 million
500:1 / 300 cd/m
2
8 ms
140, 130 (CR=10)
Line frequency 
Image frequency30 - 83 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image checks 
Controls 
FunctionsDigital, OSD Technology, i key 
(automatic image setting) 
5 buttons and i key.
Contrast, brightness, vert. & hor. image position, 
phase, pixel clock, color balance, color palette, 
choice of language (8 language OSD), OSD 
position, status indicator
Power Management
Max. power consumption 
Power saving modeVESA DPMS, EPA
40 Watt
< 1 Watt
Input signal 
SynchronisationRGB analog 0.7 Vpp/75 Ohm positive 
TTL separate signal connection 15-pin mini D-sub 
cable 
Temperature (operating) 
Air humidity (operating)0 °C - 40 °C
10% - 90%
Certifications TCO 03, TÜV/Ergonomics, TÜV/ GS, FCC Class 
B, ISO 13406-2, VCCI,  CB Report, CE, C-Tick, 
BSMI, Fimko, GOST, CSA
US, CCC
Operating voltage 
Dimensions (H x W x D) 
WeightAutomatic switched mode power supply, 
90-264 V, 47-63 Hz
362 x 378 x 135 mm
3.8 kg
 
						

							  34   Specifications
BenQ FP71G+u
ModelFP71G+u
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time 
Viewing angle (left/right, up/down) 17.0 , active, TFT
43.2 cm
1,280X1,024
16.2 million
800:1 / 300 cd/m
2
5 ms
160, 160 (CR=10)
Line frequency 
Image frequency30 - 83 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image checks 
Controls 
FunctionsDigital, OSD Technology, i key 
(automatic image setting) 
5 buttons and i key.
Contrast, brightness, vert. & hor. image position, 
phase, pixel clock, color balance, color palette, 
choice of language (8 language OSD), OSD 
position, status indicator
Power Management
Max. power consumption 
Power saving modeVESA DPMS, EPA
40 Watt
< 1 Watt
Input signal 
SynchronisationRGB analog 0.7 Vpp/75 Ohm positive 
TTL separate signal connection 15-pin mini D-sub 
cable 
Temperature (operating) 
Air humidity (operating)0 °C - 40 °C
10% - 90%
Certifications TCO 03, TÜV/Ergonomics, TÜV/ GS, FCC Class 
B, ISO 13406-2, VCCI,  CB Report, CE, C-Tick, 
BSMI, Fimko, GOST, CSA
US, CCC
Operating voltage 
Dimensions (H x W x D) 
WeightAutomatic switched mode power supply, 
90-264 V, 47-63 Hz
362 x 378 x 135 mm
3.8 kg