BenQ Fp51g User Manual

							  21   How to adjust your monitor
OSD sub menu
Press the W or X keys to adjust the Horizontal 
Position of the OSD.
Press the Exit key to return to previous menu.
Press the
W or Xkeys to adjust the Vertical 
Position of the OSD.
Press the Exit key to return to previous menu.
Press the
W or X keys to adjust the display time 
of the OSD.
Press the Exit key to return to previous menu.
 
						

							22  How to adjust your monitor  
Languages Sub menu
Press the 
W or X keys to select a language to have the OSD display menus in that language.
Press the Exit key to return to previous menu.
 
						

							
  23
  How to adjust your monitor
Recall sub menu
Press the W or X keys to select  Color Recall. 
Press the  Enter key to recall color settings, or 
press the  Exit key to return to previous menu.
Press the 
W or X keys to select  Recall All. Press 
the  Enter  key to recall position and color 
settings, or press the  Exit key to return to 
previous menu.
 
						

							24  How to adjust your monitor  
Miscellaneous sub menu
Press the W or X keys to adjust the degree of 
Sharpness.
Press the Exit key to return to previous menu.
 
Select Display Information to display the 
current monitor property settings. 
Press the Exit key to return to previous menu.
 
 
						

							  25   Troubleshooting
9. Troubleshooting
Frequently Asked Questions (FAQ)
The image is blurred:
Read the 
How to adjust the screen resolution on page 14 section, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in the 
How to adjust the screen refresh rate on page 15 section It 
is normal for blurring to occur due to conduction losses in extension cables. You can minimize 
these losses by using an extension cable with better conduction quality or with a built-in booster.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the How to adjust the screen resolution on page 14 section. Select the native resolution.
Pixel errors can be seen:
One of several pixels is permanently black, one or more pixels are permanently white, one or 
more pixels are permanently red, green, blue or another color.
•  Clean the LCD screen.
•  Cycle power on-off.
•  These are pixels that are permanently on or off and is a natural defect that occurs in LCD 
technology.
The image has a faulty coloration:
It has a yellow, blue or pink appearance.
On the monitor, press “Enter” key and press W or X key to move to the “Recall” icon and press 
“Enter” key to enter “Recall” sub menu. Press 
W or X key to select “Color Recall” and select “Yes” 
in “Color Recall” sub menu, then press “Enter” key to recall to factory settings. If the image is still 
not correct and the OSD also has faulty coloration, this means one of the three primary colors is 
missing in the signal input. Now check the signal cable connectors. If any pin is bent or broken off, 
please contact your dealer to get necessary support.
No image can be seen:
Is the prompt on the display illuminated in green?
If the LED is illuminated in green and there is a message “Out of Range” on the screen, this means 
you are using a display mode that this monitor does not support, please change the setting to one 
of the supported mode. Please read “
Supported operating modes on page 27” section.
Is the prompt on the display illuminated in orange?
If the LED is illuminated in orange, the power management mode is active. Press any button on 
the computer keyboard or move the mouse. If that does not help, check the signal cable 
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
 
						

							26 Troubleshooting  
The image is distorted, flashes or flickers:
Read the 
How to adjust the screen resolution on page 14 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the 
How to adjust the screen resolution on page 14 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
Need More Help?
If your problems remain after checking this manual, please contact your place of purchase or 
e-mail us at: [email protected]
 
						

							  27   Supported operating modes
10. Supported operating modes
•Modes not listed in the table may not be supported. For an optimal picture, we recommended 
you choose a mode listed in the table above.
•There are 14 available modes that are compatible with Windows. 
•Image disruption may occur as a result of signal frequency differences from VGA cards which 
do not correspond with the usual standard. This is not, however, an error. You may improve 
this situation by altering an automatic setting or by manually changing the phase setting and 
the pixel frequency from the “Geometry” menu.
•If you switch off the monitor, interference lines can occur on your screen. But do not be 
concerned about this, as it is normal. 
•To extend the service life of the product, we recommend that you use your computers power 
management function. 
Incoming display mode (Input timing)
ResolutionHorizontal 
Frequency (KHz)Ve r t i c a l  
Frequency (Hz)Pixel 
Frequency (MHz)Comment
640 x 350 31.47(P) 70.08(N) 25.17 DOS
720 x 400 31.47(N) 70.08(P) 28.32 DOS
640 x 480 31.47(N) 60.00(N) 25.18 DOS
640 x 480 35.00(N) 61.00(N) 30.24 Macintosh
640 x 480 37.86(N) 72.80(N) 31.50 VESA
640 x 480 37.50(N) 75.00(N) 31.50 VESA
800 x 600 37.88(P) 60.32(P) 40.00 VESA
800 x 600 48.08(P) 72.19(P) 50.00 VESA
800 x 600 46.87(P) 75.00(P) 49.50 VESA
832 x 624 49.72(N) 74.55(N) 57.29 Macintosh
1024 x 768 48.36(N)60.00(N) 65.00 VESA
1024 x 768 56.48(N)70.10(N) 75.00 VESA
1024 x 768 60.02(P)75.00(P) 78.75 VESA
1024 x 768 60.24(N) 74.93(N) 80.00 Macintosh
 
						

							28 Specifications  
11. Specifications
ModelFP51G+
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time 
Viewing angle (left/right, up/down) 15.0, active, TFT
38.1 cm
1,024 x 768
16.2 million
700:1 / 250 cd/m
2
8 ms
140, 130 (CR=10)
Line frequency 
Image frequency31 - 83 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image checks 
Controls 
FunctionsAnalog, OSD Technology, i key (automatic image 
setting) 
5 buttons and i key.
Contrast, brightness, vert. & hor. image position, 
phase, pixel clock, color balance, color palette, 
choice of language (8 language OSD), OSD 
position, status indicator
Power management
Max. power consumption 
Power saving modeVESA DPMS, EPA
30 Watt
< 1 Watt
Input signal 
SynchronizationRGB analog 0.7 Vpp/75 Ohm positive 
TTL separate signal connection 15-pin mini D-sub 
cable 
Temperature (operating) 
Air humidity (operating)0 °C - 40 °C
10% - 90%
Certifications TCO 99/03, TÜV/Ergonomics, TÜV/ GS, FCC 
Class B, ISO 13406-2, VCCI, CB Report, CE, 
C-Tick, BSMI, Fimko, GOST, CSA
US, CCC, 
SASO, PSB, Green Mark, MIC, EPA
Operating voltage 
Dimensions (H x W x D) 
WeightAutomatic switched mode power supply, 
100-240 V, 50-60 Hz
338 x 331 x 136 mm
3.7 kg