BenQ Fp51g User Manual

  11   Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software 
on your Microsoft Windows computer. It is currently tested as compatible (and recommended 
only) for Windows XP and Windows Vista Operating System (OS). 
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, 
however, as at the time of writing, BenQ has done no...

12  Getting the most from your BenQ monitor  
How to install on Windows Vista systems
1. Open Display Settings.
Right-click the desktop and select Personalize from the popup menu.
Select Display Settings from the Personalize appearance and sounds window. 
The Display Settings window will display.
2. Click the Advanced Settings button. 
The Generic PnP Monitor Properties window will display.
3. Click the Monitor tab and the Properties button.
4. Click Continue in the prompted User Account Control window....

  13   Getting the most from your BenQ monitor
How to install on Windows XP system
1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop. 
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel. 
In Windows XP version, Control Panel is located directly under the main Start menu item. 
The menu options displayed will depend upon which type of view is selected for...

14  How to adjust the screen resolution  
5. How to adjust the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. 
The best possible picture for your FP51G
+ is achieved with a resolution of 1024 x 768. This is 
called “Native Resolution” or maximal resolution – that is, the clearest picture. Lower resolutions 
are displayed on a full screen through an interpolation circuit. However flaws do occur with the 
interpolated resolution. 
To...

  15   How to adjust the screen refresh rate
6. How to adjust the screen refresh rate 
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not 
technically possible for an LCD display to flicker. The best results are obtained by using the factory 
modes already set in your computer. There is a table with the factory modes in the specification 
section of this User Manual. 
You can choose 60, 70 and 75 Hertz, (but not 72Hz) for the native resolution of 1024x768. 
1....

16  How to set the picture optimization  
7. How to set the picture optimization 
The easiest way to obtain an optimal display is to use the i key function. Press the i key to 
optimize and adjust the screen settings automatically for you. Refer to 
How to adjust your monitor 
on page 17
 for button locations and functionality. 
If you wish to, you can always adjust the screen settings manually using the buttons on the 
monitor panel. To assist you in this endeavour, BenQ has provided a screen test image...

  17   How to adjust your monitor
8. How to adjust your monitor
A Look at the Control Panel
1. “i key”: Adjust vertical position, phase, horizontal position and pixel clock automatically.
2. “Exit” key: Back to previous menu or exit OSD. 
3.
W (Left) key: For Left/Decrease adjustment. Left key is the hot key for Contrast.
4.  
X (Right) key: For Right/Increase adjustment. Right key is the hot key for Brightness.
5. “Enter” key: Activate OSD, enter sub menu, select items, and confirm selection.
6....

18  How to adjust your monitor  
Main Menu Mode
Control Functions Available in Main Menu 
Luminance sub menu
Main Menu
Press the W or X keys to adjust the degree of 
Brightness.
Press the Exit key to return to previous menu. 
Press the 
W or X keys to adjust the degree of 
Contrast.
Press the Exit to return to previous menu.
 

  19   How to adjust your monitor
Geometry sub menu
Press the 
W or X keys to adjust the display 
Horizontal Position.
Press the Exit key to return to previous menu.
Press the 
W or X keys to adjust the display 
Vertical Position.
Press the Exit key to return to previous menu.
.
Press the 
W or X key to adjust the monitor 
Pixel Clock.
Press the Exit key to return to previous menu.
Press the 
W or X keys to adjust the degree of 
screen display Phase.
Press the Exit key to return to previous menu.
 

20  How to adjust your monitor  
Color sub menu
Bluish    - applies a cool tint to the image and is factory pre-set to the PC industry standard white 
color.
Reddish - applies a warm tint to the image and is factory pre-set to the news print standard white 
color.
Normal  - allows video and still photographs to be viewed with natural coloring. This is the factory 
default color.
User Preset
User Preset is provided so you can tailor the 
image color tint to suit your liking. The blend of 
the Red, Green...