BenQ Fp241w User Manual

							  31   How to adjust your monitor
Main menu mode
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor. 
Press the MENU key to display the following main OSD menu. 
The OSD menu languages may differ from the product supplied to your region, see “Language on page 
42” under “OSD Settings” for more details. 
For more information on each menu, please refer to the following pages:
• Display menu on page 32
• Picture menu on page 34
• Picture Advanced menu on page 37
• PIP (Picture-in-Picture) menu on page 39
• System menu on page 41
There are 5 main OSD menus:
1. Display
2. Picture
3. Picture Advanced
4. PIP (Picture in Picture)
5. System
Use the 
t (Up) or u (Down) keys to 
highlight a menu item, and press the 
ENTER key to enter the Menu item settings.
13
2
45
 
						

							32  How to adjust your monitor  
Display menu
The current picture mode is displayed in the top right corner of the main menu. See Picture Mode on 
page 37 to learn more information.
1. Press the MENU key to display the main 
menu.
2. Press the 
t or u keys to select DISPLAY 
and then press the ENTER key to enter the 
menu.
3. Press the 
t or u keys to move the 
highlight to a menu item and then press the 
ENTER key to select that item.
4. Press the 
t or u keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU key.
ItemFunctionOperationRange
Auto 
AdjustmentOptimizes and adjusts the 
screen settings 
automatically for you. The 
i key is a ‘hot-key’ for this 
function. 
When you connect a 
digital video output 
using a digital (DVI) 
cable to your monitor, 
the i key and the Auto 
Adjustment function 
will be disabled. 
Press the ENTER key to 
select this option and make 
adjustment.
 
						

							  33   How to adjust your monitor
H. Position Adjusts the horizontal 
position of the screen 
image. 
Press the 
t or u keys to 
adjust the value.0 to 100
V. Position Adjusts the vertical 
position of the screen 
image.0 to 100
Pixel Clock Adjusts the pixel clock 
frequency timing to 
synchronize with the 
analog input video signal. 
Not applicable to a digital 
input signal.
See also: 
Picture 
optimization on page 24.
0 to 100
Phase Adjusts the pixel clock 
phase timing to 
synchronize with the 
analog input video signal. 
Not applicable to a digital 
input signal. 
See also: 
Picture 
optimization on page 24.
0 to 63
 
						

							34  How to adjust your monitor  
Picture menu
1. Press the MENU key to display the main 
menu.
2. Press the 
t or u keys to select PICTURE 
and then press the ENTER key to enter the 
menu.
3. Press the 
t or u keys to move the 
highlight to a menu item and then press the 
ENTER key to select that item.
4. Press the 
t or u keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU key.
ItemFunctionOperationRange
Brightness Adjusts the balance 
between light and dark 
shades.
The function is not 
available for use when 
DynamicContrast is 
on.
Press the t key to 
increase the brightness 
and press the 
u key to 
decrease the brightness.0 to 100
Contrast Adjusts the degree of 
difference between 
darkness and lightness. 
The function is not 
available for use when 
DynamicContrast is 
on.
Press the t key to 
increase the contrast and 
press the 
u key to 
decrease the contrast.0 to 100
Sharpness Adjusts the clarity and 
visibility of the edges of 
the subjects in the image.Press the 
t key to 
improve the crispness of 
the display and press the 
u key to have softness 
effect on the display.1 to 5
Color - Press ENTER to enter the Color menu.
 
						

							  35   How to adjust your monitor
Normal Allows video and still 
photographs to be viewed 
with natural coloring. This 
is the factory default color. 
Press the 
t or u keys to 
select this option. Bluish Applies a cool tint to the 
image and is factory 
pre-set to the PC industry 
standard white color.
Reddish Applies a warm tint to the 
image and is factory 
pre-set to the news print 
standard white color.
User Mode Tailors the image color 
tint. The blend of the Red, 
Green and Blue primary 
colors can be altered to 
change the color tint of the 
image. The default start 
setting is 50. Decreasing 
one or more of the colors 
will reduce their respective 
influence on the color tint 
of the image. e.g. if you 
reduce the Blue level the 
image will gradually take 
on a yellowish tint. If you 
reduce Green, the image 
will become a magenta 
tint.Press the 
t or u keys 
and the ENTER key to 
select Red, Green, or Blue. 
Then use the 
t or u 
keys to make the color 
adjustments.• Red 
(0 to 100)
• Green
(0 to 100)
• Blue
(0 to 100)
Reset Color Resets the User Mode 
custom color settings to 
the factory defaults. Press the 
t or u keys to 
change the settings. • Ye s
• No
Press Menu to leave the menu.
DynamicContrast The function will increase 
the level of contrast to 
provide sharper and more 
detailed image quality.
Activating 
DynamicContrast will 
disable Brightness and 
Contrast controls. 
Press the ENTER key to 
select this option. Press 
the  
t or ukeys to 
change the settings.• ON
• OFF
 
						

							36  How to adjust your monitor  
Hue Adjusts the level of the 
primary color or mixtures 
of main colors which 
present in the displayed 
image. 
The function is not 
available for use when 
the input source is 
D-Sub or DVI-D.Press the  t or u keys 
to move the highlight to a 
menu item and then press 
the 
t or u keys to 
adjust the value.0 to 100
Saturation Adjusts the purity and 
intensity of colors in the 
displayed image. 
The function is not 
available for use when 
the input source is 
D-Sub or DVI-D.
0 to 100
 
						

							  37   How to adjust your monitor
Picture Advanced menu
1. Press the MENU key to display the main 
menu.
2. Press the 
t or u keys to select PICTURE 
ADVANCED and then press the ENTER 
key to enter the menu.
3. Press the 
t or u keys to move the 
highlight to a menu item and then press the 
ENTER key to select that item.
4. Press the 
t or u keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU key.
ItemFunctionOperationRange
Picture Mode
Selects a picture mode that 
best suits the type of 
images shown on the 
screen. 
• Standard - for basic PC 
application.
• Movie - for viewing 
videos.
• Dynamics - for viewing 
landscape-specific videos 
and playing games.
• Photo - for viewing still 
images.
• sRGB - for better color 
matching representation 
with the peripheral 
devices, such as printers, 
DSCs, etc.Press the 
t or u keys to 
change the settings. • Standard
• Movie
• Dynamics
• Photo
• sRGB
 
						

							38  How to adjust your monitor  
Senseye Demo
Displays the preview of 
screen images under the 
selected mode from 
Picture Mode. The screen 
will be divided into two 
windows; the left window
demonstrates images of 
Standard mode, while
the right window presents 
the images under the spec-
ified mode.Press the t or u keys to 
change the settings. • ON
• OFF
Overscan
Slightly enlarges the input 
image. Use this feature to 
hide annoying edge noise 
if present around your 
image.
The function is not 
available for use when 
the input source is 
D-Sub or DVI-D. When 
the input source is 
component, composite, 
or S-video, the function 
is ON by default; 
however, when the 
input source is HDMI, 
the default setting is 
OFF.
Press the t or u keys to 
change the settings. • ON
• OFF
 
						

							  39   How to adjust your monitor
PIP (Picture-in-Picture) menu
1. Press the MENU key to display the main 
menu.
2. Press the 
t or u keys to select PIP and 
then press the ENTER key to enter the 
menu.
3. Press the 
t or u keys to move the 
highlight to a menu item and then press the 
ENTER key to select that item.
4. Press the 
t or u keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU key.
ItemFunctionOperationRange
Input Selects the video input for 
PIP viewing window. Use 
this to change the input to 
that appropriate to your 
video cable connection 
type.
See also 
PIP hot key on 
page 28.
Press the t or u keys to 
change the settings. 
This command can bring 
up a window from a 
second image source. 
Thus you can watch 
images from 1 computer 
graphic/PC video source 
(D-sub, DVI, Component, 
or HDMI) and 1 video 
source (Composite, or 
S-video). The PIP 
function will not allow for 
2 computer graphic/PC 
video sources or 2 video 
sources to perform PIP.
• Composite
• S-video
• OFF
or
• D-sub
• DVI
• HDMI
• Component
• OFF
Size Adjusts the size of the PIP 
window.Press the 
t or u keys to 
change the settings. • Small
• Medium
• Large
H. Position Adjusts the horizontal 
position of the PIP 
window. 
Press the 
t or u keys to 
adjust the value.0 to 25
V. Position Adjusts the vertical 
position of the PIP 
window.
Contrast Adjusts the degree of 
difference between 
darkness and lightness of 
the images in the PIP 
window. Press the 
t key to increase 
the contrast and press the 
u key to decrease the 
contrast.0 to 100
 
						

							40  How to adjust your monitor  
Sharpness Adjusts the clarity and 
visibility of the edges of 
the subjects in the images 
displayed in the PIP 
window.Press the t key to improve 
the crispness of the display 
and press the 
u key to have 
softness effect on the 
display.1 to 5