BenQ Fp222wa User Manual

  31   How to adjust your monitor
H. Position Adjusts the horizontal 
position of the OSD menu. 
Press the 
t or u keys to 
adjust the value.0 to 100
V. Position Adjusts the vertical 
position of the OSD menu.0 to 100
Display Time Adjusts the display time of 
the OSD menu.• 5 Sec.
• 10 Sec.
• 15 Sec.
• 20 Sec.
• 25 Sec.
• 30 Sec.
OSD Lock Prevents all the monitor 
settings from being 
accidentally changed. 
When this function is 
activated, the OSD 
controls and hotkey 
operations will be 
disabled.Press...

32 Troubleshooting  
9. Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the 
How to adjust the screen resolution on page 18 section, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in the 
How to adjust the screen refresh rate on page 19 section It 
is...

  33   Troubleshooting
The image is distorted, flashes or flickers:
Read the 
How to adjust the screen resolution on page 18 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the 
How to adjust the screen resolution on page 18 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible:
•To unlock the OSD controls...

34  Supported PC Timings  
10. Supported PC Timings
•Image disruption may occur as a result of signal frequency differences from graphic cards which 
do not correspond with the usual standard. This is not, however, an error. You may improve this 
situation by altering an automatic setting or by manually changing the phase setting and the pixel 
frequency from the “Display” menu.
•To extend the service life of the product, we recommend that you use your computers power 
management function. 
Incoming...

  35   Specifications
11. Specifications
ModelFP222W a
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time 
Viewing angle (left/right, up/down) 22.0”, active, TFT
558.68 mm
1,680 x 1,050
16.7 million
700:1 / 300 cd/m
2
5 ms 
170, 160 (CR>
10)
Line frequency 
Image frequency30 - 82 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image diagnostics 
Controls 
FunctionsAnalog, OSD Technology, 
i  key (automatic image 
setting) 
7...