Home > BenQ > Monitor > BenQ E910 User Manual

BenQ E910 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual BenQ E910 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							  11
      Getting the most from your BenQ monitor
    4. Getting the most from your BenQ monitor
    To gain the most benefit from  your new BenQ color LCD flat sc reen monitor, you should install 
    the custom BenQ LCD Monitor driver software  as provided on the BenQ LCD Monitor CD-ROM.
    The circumstances under which you connect and in stall your BenQ LCD Monitor will determine 
    which process you need to follow to successfully install the BenQ LCD Monitor driver software. 
    These circumstances relate to which version of  Microsoft Windows you are using, and whether 
    you are connecting the monitor and installing the so ftware onto a new computer (without existing 
    monitor driver software), or whet her you are upgrading an existing  installation (which already has 
    existing monitor driver software) with a newer monitor. 
    In either case however, the very next time you  turn on your computer (after connecting the 
    monitor to your computer), Windows will automatically recognise the new (or different) 
    hardware, and will launch its  Found New Hardware wizard. 
    Follow the wizard instructions until it asks you to  select a monitor model. At that point, click the 
    Have Disk  button, insert the BenQ LCD Monitor CD-ROM and select the appropriate monitor 
    model. Further details and step-by-step instruc tions for both an automatic (new) or upgrade 
    (existing) installation follow. See:
    • How to install the monitor on  a new computer on page 12. 
    • How to upgrade the monitor on an  existing computer on page 13 
    If you require a User Name and Password to login to your Windows computer, you must be logged on as 
    an Administrator or as a member of  the Administrators group in order to install the monitor driver software. 
    Furthermore, if your computer is connected to a network which has security access requirements, network 
    policy settings may prevent you from in stalling software on your computer. 
     
    						
    							12  Getting the most from your BenQ monitor  
    How to install the monitor on a new computer
    This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
    software on a new computer which has never  had a monitor driver installed before. This 
    instruction is only suitable for a computer which has never been used before, and for which the 
    BenQ LCD Monitor is the first ever monitor to be connected to it.
    If you are adding the BenQ LCD Monitor to an exis ting computer that has already had another monitor 
    connected to it (and has monitor driver software inst alled), you should not be following these instructions. 
    You should instead be following the instructions for How to upgrade the monitor on an existing computer.
    1. Follow the instructions in  Assembling your monitor hardware on page 7 . 
    When Windows starts, it will automatically detect the new monitor and launch the Found New 
    Hardware Wizard . Follow the prompts until it displays the option to  Install Hardware Device drivers.
    2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
    3. Check Search for a suitable driver for my device  option, and click Next.
    4. Check the option for  CD-ROM drives (uncheck all others) and click  Next.
    5. Look to confirm that the wizard has  selected the correct name of your monitor  and click 
    Next .
    6. Click Finish .
    7. Restart the computer.
     
    						
    							  13
      Getting the most from your BenQ monitor
    How to upgrade the monitor on an existing computer
    This instruction details the procedure for manual ly updating the existing monitor driver software 
    on your Microsoft Windows computer. It is curr ently tested as compatible for Windows XP and 
    Windows Vista Operating System (OS). 
    The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, 
    however, as at the time of writing, BenQ has done no  testing of this driver on other versions of Windows 
    and cannot guarantee its operation on those systems.
    Installing monitor driver software involves selecting  an appropriate information file (.inf ) on the 
    BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and letting 
    Windows install the corresponding driver files from the CD. You need only steer it in the right 
    direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide you 
    through the file selection and installation process. 
    See:
    • How to install on Windows Vista systems on page 14 .
    • How to install on Windows XP system on page 15 .
     
    						
    							14  Getting the most from your BenQ monitor  
    How to install on Windows Vista systems
    1. Open Display Settings.
    Right-click the desktop and select  Personalize from the popup menu.
    Select  Display Settings  from the Personalize appearance and sounds  window. 
    The  Display Settings  window will display.
    2. Click the Advanced Settings  button. 
    The Generic PnP Monitor Properties  window will display.
    3. Click the Monitor tab and the  Properties button.
    4. Click Continue  in the prompted User Account Control  window.
    5. Click the  Driver tab and the Update Driver  button.
    6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
    7. In the  Update Driver Software  window, select the option ‘ Browse my computer for driver 
    software ’.
    8. Click ‘Browse ’ and navigate to the fo llowing directory: d:\BenQ_LCD\Driver (where d is the 
    drive letter designator for the CD-ROM drive).
    The drive letter for your CD drive may differ from th e example above depending upon your system – it may 
    be ‘D:’ or ‘E:’ or ‘F:’ etc.
    9. Select the correct folder name of your  monitor from provided driver list, and click  Next.
    This will copy and install the appropriate monitor driver files to your computer.
    10. Click Close .
    You do not need to restart Windows Vista, as the  BenQ LCD monitor drivers will operate immediately 
    with no further action required by you. 
     
    						
    							  15
      Getting the most from your BenQ monitor
    How to install on Windows XP system
    1. Open  Display Properties .
    The quickest shortcut to  Display Properties is through the Windows desktop. 
    Right-click the desktop and select  Properties from the popup menu.
    Alternatively, the Windows menu to  Display Properties is located in Control Panel. 
    In Windows XP version,  Control Panel is located directly under the main Start  menu item. 
    The menu options displayed will depend upon whic h type of view is selected for your system. 
    • Under the Classic view, click  Start | Control  Panel  | Display .
    • Under the Category view, click  Start | Control  Panel  | Appearance and Themes  | Change the 
    screen resolution .
    The  Display Properties window will display.
    2. Click the  Settings tab and the Advanced  button. 
    The Advanced Display Properties  window will display.
    3. Click the Monitor tab and select the ‘Plug and  Play Monitor’ from the list.
    If there is only one monitor in the list, it will already be selected for you.
    4. Click the Properties button. 
    The Monitor Properties  window will display. 
    If the driver provider is listed as BenQ, and the model matches that of your new monitor, the proper 
    drivers are already installed, and you need do nothing further. Cancel out of these property windows. 
    However, if BenQ is not listed as the manufacturer, or the correct model is not currently shown, you 
    will need to continue with these instructions.
    5. Click the  Driver tab and the Update Driver  button.
    The Hardware Update Wizard  will display. Follow the wizard instructions noting the steps below:
    6. Insert the BenQ LCD Monitor CD-ROM into a  CD drive on the computer you attached the 
    monitor to.
    7. Check the option ‘ Install from a list or specific location ’ and click Next.
    8. Check the option ‘ Search for the best driver in these locations ’ and also check ‘Search 
    removable media ’, then click Next.
    Please wait while the wizard searches for drives and the BenQ LCD Monitor CD inserted in step 6. 
    When completes, the wizard should have found and selected the BenQ driver on the CD appropriate to 
    your monitor model.
    9. Select (single-click) the correct name of  your monitor from provided driver list on the CD, 
    and click the  Next button.
    This will copy and install the appropriate monitor driver files to your computer.
    10. Click  Finish.
    This will close the wizard and return you to the  Monitor Properties window.
    11. Click Close, OK, and OK.
    This will close the  Display Properties windows. You do not need to restart Windows XP, as the BenQ 
    LCD monitor drivers will operate immediately with no further action required by you. 
     
    						
    							16  Picture optimization  
    5. Picture optimization 
    The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the AU TO key 
    function. Press the  AU TO
     key to optimize the currently displayed image to the screen. 
    When you connect a digital video output using a digital (DVI) cable to your monitor, the  AUTO key and the 
    Auto Adjustment  function will be disabled, because the monitor will automatically disp lay the best image. 
    Please ensure that the connected graphic card on your  computer is set to the native resolution of the 
    monitor when you use the  AUTO key function.
    If you wish, you can always adjust the screen  geometric settings manually using geometry menu 
    items. To assist you in this ende avour, BenQ has provided a screen  test image utility which you can 
    use to check for screen color, gray scale and line gradient display.
    1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as  the desktop of your operating system. However,  we recommend that you use auto.exe. As you 
    run auto.exe, a test pattern displays.
    2. Press the  AU TO key on the monitor.
    3. Press the  MENU key to access the monitor On-Screen Display (OSD) menu.
    4. Use the 
    t or u keys to select  DISPLAY and press the ENTER  key to enter the menu.
    5. If you notice a vertical noise (like a curtai n effect-shimmering of vertical lines), press the 
    t 
    or 
    u keys to select  Pixel Clock and press the  ENTER key. Then press thet or u keys to 
    adjust the monitor until the noise disappears.
    6. If you notice a horizontal noise, press the 
    t or u keys to select  Phase and press the  ENTER 
    key. Then press the 
    t or u keys adjust the monitor until the noise disappears.
     
    						
    							  17
      How to adjust your monitor
    6. How to adjust your monitor
    The control panel
    1. “Power”: Turn the power on or off.
    2. “AUTO”: Adjust vertical position, phase, hori zontal position and pixel clock automatically.
    3. “MENU” key: Activate OSD main menu and  return to the previous menu or exit OSD.
    4.
    t /Volume key: For Up/Increase adjustment.  The key is also the hot key for Volume. 
    5.
    u /Mode key: For Down/Decrease adjustment. The key is also the hot key for Mode.
    6. “ENTER” key: Enter sub menus and select items. The key is also the hot key for Input.
    OSD = On Screen Display.
    The hot-keys will display a graduated scale for adjusting the value of that sett ing, and will only operate 
    while the OSD menu is not currently  displaying. Hot-key displays will disappear after a few seconds of no 
    key activity. See  Hot key mode on page 18 .
     
    						
    							18  How to adjust your monitor  
    Hot key mode
    The monitor keys perform as hotkeys to provide direct access to particular functions whenever the 
    menu isnt currently displaying on-screen.
    Volume hot key
    Mode hot key
    Input hot key  Press the 
    t key to enter the 
    Vo l u m e indic-
    tor. Further press the 
    t key to increase or 
    the 
    u key to decrease the volume, and press 
    the  MENU  key to exit. 
    Press the 
    u key continually to switch 
    between the 5 modes for the main window, 
    including  Standard, Movie, Dynamics , 
    Photo , and sRGB . The setting will take effect 
    immediately.
    See also  
    Picture Mode on page 24. 
    Press the  ENTER key to toggle between 
    different PC video signal inputs that may be 
    connected to your monitor. 
    The setting will take effect immediately.
    See also 
    Input on page 27. 
     
    						
    							  19
      How to adjust your monitor
    Main menu mode
    You can use the OSD (On Screen Display) menu  to adjust all the settings on your monitor. 
    Press the  MENU key to display the following main OSD menu. 
    The OSD menu languages may differ from the product supplied to your region,  see “Language on page 
    28” under “OSD Settings” for more details. 
    For more information on each menu,  please refer to the following pages:
    • Display menu on page 20
    • Picture menu on page 22
    • Picture Advanced menu on page 24
    • Audio menu on page 26
    • System menu on page 27
    1. Display
    2. Picture
    3. Picture Advanced
    4. Audio
    5. System
    Use the 
    t or u keys to highlight a menu 
    item, and press the  ENTER key to enter the 
    Menu item settings.
    134 25
     
    						
    							20  How to adjust your monitor  
    Display menu1. Press the MENU key to display the main 
    menu.
    2. Press the 
    t or u keys to select  DISPLAY 
    and then press the  ENTER key to enter the 
    menu.
    3. Press the 
    t or u keys to move the 
    highlight to a menu item and then press 
    the  ENTER  key to select that item.
    4. Press the 
    t or u keys to make 
    adjustments or selections.
    5. To return to the previous menu, press the  MENU  button.
    ItemFunctionOperationRange
    Auto 
    Adjustment Optimizes and adjusts the 
    screen settings 
    automatically for you. The 
    AU TO
     key is a ‘hot-key’ 
    for this function. 
    When you connect a 
    digital video output 
    using a digital (DVI) 
    cable to your monitor, 
    the  AUTO  key and the 
    Auto Adjustment  
    function will be disabled. 
    Press the  ENTER key to 
    select this option and make 
    adjustment.
     
    						
    All BenQ manuals Comments (0)

    Related Manuals for BenQ E910 User Manual