BenQ E2200hdp User Manual

  21   How to adjust your monitor
H. Position Adjusts the horizontal 
position of the screen 
image. 
Press the   or   keys to 
adjust the value.0 to 100
V. Position Adjusts the vertical 
position of the screen 
image.0 to 100
Pixel Clock Adjusts the pixel clock 
frequency timing to 
synchronize with the 
analog input video signal. 
Not applicable to a digital
input signal.
See also: 
Picture 
optimization on page 16
.0 to 100
Phase Adjusts the pixel clock 
phase timing to 
synchronize with the 
analog...

22  How to adjust your monitor  
Picture menu
1. Press the MENU key to display the main 
menu.
2. Press the   or   keys to select 
PICTURE and then press the ENTER key 
to enter the menu.
3. Press the   or   keys to move the 
highlight to a menu item and then press 
the ENTER key to select that item.
4. Press the   or   keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Brightness Adjusts the balance 
between light and dark...

  23   How to adjust your monitor
Normal Allows video and still 
photographs to be viewed 
with natural coloring. 
This is the factory default 
color. 
Press the   or   keys 
to select this option. Bluish Applies a cool tint to the 
image and is factory 
pre-set to the PC industry 
standard white color.
Reddish Applies a warm tint to the 
image and is factory 
pre-set to the news print 
standard white color.
User Mode Tailors the image color 
tint. The blend of the Red, 
Green and Blue primary 
colors...

24  How to adjust your monitor  
Picture Advanced menu
1. Press the MENU key to display the main 
menu.
2. Press the   or   keys to select 
PICTURE ADVANCED and then press the 
ENTER key to enter the menu.
3. Press the   or   keys to move the 
highlight to a menu item and then press 
the ENTER key to select that item.
4. Press the   or   keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Picture Mode
Selects a picture mode that...

  25   How to adjust your monitor
Display Mode This feature is provided to 
allow aspect ratio’s other 
than 16:9 to be displayed 
without geometric 
distortion.
• Full - Scales the input 
image to fill the screen. 
Ideal for 16:9 aspect 
images.
• Aspect - The input image 
is displayed without 
geometric distortion 
filling as much of the 
display as possible. 16:9 
images will fill the screen 
horizontally while 4:3 
images will fill the screen 
vertically.Press the   or   keys 
to change the...

26  How to adjust your monitor  
System menu
1. Press the MENU key to display the main 
menu.
2. Press the   or   keys to select SYSTEM 
and then press the ENTER key to enter the 
menu.
3. Press the   or   keys to move the 
highlight to a menu item and then press 
the ENTER key to select that item.
4. Press the   or   keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Input Use this to change the 
input to that appropriate 
to...

  27   How to adjust your monitor
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics 
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for 
remote diagnostics.
H. Position Adjusts the horizontal 
position of the OSD menu. 
Press the   or   keys to 
change the settings. 0 to 100
V. Position Adjusts the vertical 
position of the OSD menu.0 to 100
Display Time Adjusts the display time of 
the OSD menu.• 5...

28 Troubleshooting  
7. Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the instructions on the link Adjusting the Screen Resolution on the CD, and then select 
the correct resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in the 
Adjusting the refresh rate section on the link...

  29   Troubleshooting
If the LED is illuminated in orange, the power management mode is active. Press any button on 
the computer keyboard or move the mouse. If that does not help, check the signal cable 
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the instructions...