BenQ E2200hda User Manual

LCD Monitor
User Manual
E900HD/E900HDA 
E2200HD/E2200HDA
M2200HD 
M2400HD/E2400HD 
 

2   
Copyright
Copyright © 2008 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

Table of Contents
Copyright ........................................................................................................................ 2
Disclaimer ....................................................................................................................... 2
Getting started ................................................................................................................4
Getting to know your monitor...

4  Getting started  
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, 
please contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Monitor Base
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product 
supplied for your region.)
Video Cable: D-Sub 
AUTO MENU ENTER
 

  5   Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Video Cable: DVI-D 
(Optional accessory for models with
DVI inputs, sold separately)
Video Cable: HDMI
(Optional accesory for models with
HDMI inputs, sold separately)
Audio Cable
Webcam 2.0M
(For M2200HD and M2400HD only)
USB Cable
(For M2200HD and M2400HD only)
 
 

6  Getting to know your monitor  
2. Getting to know your monitor
Front view
Back view
 Above diagram may vary depending on the model.
LCD Model Sockets Available
E900HDA, E2200HDA D-sub, Line in, Headphone jack
E900HD D-sub, DVI-D, Line in, Headphone jack
E2200HD, E2400HD D-sub, DVI-D, HDMI, Line in, Headphone jack
M2200HD D-sub, DVI-D, HDMI, Line in, Headphone jack,
USB port x4
M2400HD D-sub, DVI-D, HDMI, Line in, Headphone jack,
USB port x3
AUTO MENU ENTER
345812
11
10
116279
1.   Speakers
2.   AC...

  7   How to assemble your monitor hardware
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate 
voiding your warranty. Sliding or scraping the monitor 
around on your desk...

8  How to assemble your monitor hardware  
2. Connect the PC video cable 
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without 
the ferrite filter) to the monitor video socket. Connect the 
other end of the cable (at the end with the ferrite filter) to 
the computer video socket.
Tighten all finger screws to prevent the plugs from acci-
dently falling out during use.
To Connect the DVI-D Cable
Connect the plug of the DVI-D cable (at the end without 
the ferrite filter) to...

  9   How to assemble your monitor hardware
4. Connect USB Devices.
 (For models M2200HD and M2400HD only)
Connect the USB cable between the PC and the monitor. 
For M2200HD, you can plug another USB device to the 
USB socket found at the back of the monitor. See picture 
on the right
You can plug 2 more USB devices to the USB cable sock-
ets found on the left side of the monitor. See picture on the 
right.
5. Connect the webcam to the monitor. 
(For models M2200HD and M2400HD only)
Plug the USB...

10  How to assemble your monitor hardware  
7. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip 
inwards as illustrated. 
Position the cables together and re-insert the clip over 
them to retain the cables neatly in place behind the 
monitor stand.
8. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button...