BenQ Dv3750 Users Manual

							Using the Remote Control 15
English
Using the Remote Control
Power on, Power off and Standby
Tu r n i n g  o n  t h e  d i s p l a y
1. After plugging the displays power cord into a wall outlet, the display will turn on and enter 
standby mode automatically. The power indicator will light up red.
2. Press the Power button on the display, or press the (Power)  button on the remote 
control. The display will turn on. (The power indicator changes to green.)
Tu r n i n g  o f f  t h e  d i s p l a y
Press the Power button on the display, or the (Power) button on the remote control again, 
and the display will go into standby mode. (The power indicator will turn red.)
Switching Inputs
1. Turn on all connected equipment or devices.
2. Press the INPUT button on your display, or press the   (Input) button on your remote 
control to display the  current selected input.
3. Press the button repeatedly until your desired input is displayed. The sequence is as follows: 
TV -> AV1 -> AV1-RGB -> AV2 -> AV2-S->AV3->AV3-S->AV4->AV4-S->Component 1-> 
Component 2->PC->DVI->TV...
AV3-S or AV4-S will appear only when the S-Video input of AV3 or AV4 is connected.
Adjusting Volume
Adjusting the volume 
1. Press the Vo l u m e  button on your display or press the + button on your remote control 
to increase volume. The volume indicator will increase in length as volume rises.
2. Press the Vo l u m e  button on your display, or press the - button on your remote control 
to decrease volume. The volume indicator will decrease in length as volume falls.
Mute setting 
1. Press the (Mute) button on your remote control to temporarily cut off the sound.
2. Press the (Mute) button once more, or press the Vo l u m e  / or Power button on your 
display to restore the sound level.
TV sound mode selection
Press the  (TV sound mode selection) button on your remote control to select Sound 1, 
Sound 2, Sound 3, Auto, Nicam, Stereo or Mono systems (the items available will 
depend on the TV sound system being received).
Changing Channels
Change Channels Using the Channel selection buttons
• To select a single-digit channel, press the corresponding channel selection button on the 
remote control. For example, to select channel 8, press the   channel selection button on 
the remote control.
• To select a double-digit channel, press the Channel entry button on the remote control, and 
then enter the channel number using the channel selection buttons. For example, to select 
 
						

							Using the Remote Control 16
English
channel 28, press the Channel entry button, and then the  ,   channel selection 
buttons on the remote control.
Using the Channel / buttons to sequentially change channels
Press the Channel  or Channel  buttons on your remote control, or press the Channel  or 
Channel  buttons on the display to sequentially select the TV channels available in your area.
Using the channel return button to return to the previous viewed channel
To return to the previous viewed channel, press the (Channel return) button on your remote 
control.
Selecting a Picture Mode
To select a picture mode, press the(Picture mode) button on the remote control. This 
enables you to select from the 6 preset memory settings. (Vivid, Standard, Movie, Sports, 
Personal 1 and Personal 2)
Using the Freeze Function
Press the / (Freeze) button on the remote control to freeze the image on the screen.
Press the / (Freeze) button again to restore normal motion.
Adjusting Aspect Ratio
Press the / (Screen aspect ratio) button on your remote control to select the image aspect 
ratio you prefer.
Press the button several times to cycle through various ratios.
Using the Picture-in-Picture (PIP)/Picture-by-Picture (PBP) Function
If your display is connected to an additional Video or PC source, pressing the PIP/PBP but-
ton allows you to display both images on the screen at once in PIP (Picture In Picture) or PBP 
(Picture By Picture) modes:
• Full Screen: Normal display.
• Full Screen - Enlarge the standard 4:3 video signal (e.g. TV signal) to 16:9 full 
screen video signal. When the original input video source is 16:9 in ratio (e.g. 
DVD signal), no change will occur.
• 4:3  - Display the standard 4:3 video signal (e.g. TV signal) in the center of the 
screen at the ratio of 4:3. The screen does not change, but black blocks appears 
in the left and right sides of the screen. When the input video source is 16:9 in 
ratio, deformation will occur on the screen.
• Letterbox -Fill the entire 4:3 screen with a 4:3 video signal. The redundant part 
on the upper and bottom of the image will be removed and the image will 
extend vertically and horizontally to fill the full screen. When the input video 
source is 16:9 in ratio (e.g. DVD signal), no change will occur.
• Anamorphic - Fill the entire screen with a 4:3 video signal. Some deformations 
may be identified on the edge of the image. When the input video source is 16:9 
in ratio (e.g. DVD signal), no change will occur.
• Real - Display the actual size of the video source without zooming.
 
						

							Using the Remote Control 17
English
• PIP G on V: Enter PIP mode and display graphics in video.
• PIP V on G: Enter PIP mode and display video in graphics.
• PBP G by V: Enter PBP mode and display graphics by video.
• PBP V by G: Enter PBP mode and display video by graphics.
V  ( v i d e o ) =  T V,  AV 1 ,  AV 1 - R G B ,  AV 2 ,  AV 2 - S ,  AV 3 ,  AV 3 - S ,  AV 4 ,  AV 4 - S  i n p u t  i m a g e .  G  ( G r a p h i c s ) =  
Component 1, Component 2, PC or DVI input image.
Using the Sleep Timer
1. Press the (Sleep timer) button on your remote control to set the automatic sleep timer. 
2. Press the button again to increase the time interval. Time is set in increments of 30 minutes, 
from 0 to 180 minutes.
Adjusting Backlight
To adjust the intensity of your displays backlight, press the (Backlight) button on your 
remote control to select Dark, Normal or Bright.
When viewing the display in dimly lit rooms it is recommended to set the backlight to Dark. 
Setting the backlight to Dark will reduce the image brightness and make the dark areas of the 
image darker thus maintaining a high contrast image in a dark environment.
Display Information
Press the (Information) button on your remote control to display the signal information, 
including input video signal source, Video format, TV sound and current selected channel.
Using the Teletext Function
Press the(Teletext) button on the remote control to enable the Teletext function. To disable 
the function, press the button again.
When Teletext is displayed on the screen, you can:
• Press the(Teletext display) button to cycle Teletext display types among Teletext only - 
mixed display - TV video image only.
• Press the (Teletext index)  button to go to Teletext index page.
• Press the (Teletext information) button to display some concealed Teletext information.
• Press the (Enter Teletext subpage) button to enter the subpage of a Teletext menu.
• Press the  ,  ,   or  buttons to jump to different pages.
• Press the 
/ buttons to go to the previous or next page.
 
						

							On-Screen Display (OSD) Menu 18
English
On-Screen Display (OSD) Menu
OSD Structure
 
						

							On-Screen Display (OSD) Menu 19
English
Navigating the OSD Menu
You can use the OSD menu screen to adjust all the settings on your display. Follow the steps 
outlined below to select the function you desire, and refer to the pages indicated for more 
information.
Audio Menu
Press the MENU button on your remote control, or the MENU 
button on your display to bring up the following main OSD 
menu on the screen:
• Press the,, or buttons on the remote control, or the 
Channel , Channel , Volume or Volumebuttons on 
the display to select items on the main menu, choose functions 
or change settings.
• Press the OK button on the remote control, or the INPUT but-
ton on the display to enter the submenu.
• Press the MENU  button on the remote control, or the MENU 
button on your display to exit from the main menu.
For more information about the OSD menus, please refer to
the following pages:
• Aud io Menu on page  19
• Picture Menu on page  21
• Feature Menu on page  23
• TV Menu on page  25
• PC Menu on page  28
1. Press the MENU button on the remote control or 
the MENU button on the display to display the 
main menu.
2. Press the or  buttons to select Audio and 
then press OK to enter the submenu.
3. Press the  or  buttons to select an item.
4. In the Audio Menu, use theorbuttons to
adjust the setting or select the options.
5. To return to the menu one level up, press the 
MENU button on the remote control, or the 
MENU button on the display.
ItemFunctionOperationRange
Volume Adjust volume level.Use  to increase or to decrease 
volume.0 to 47
 
						

							On-Screen Display (OSD) Menu 20
EnglishBalanceAdjust left or right speaker 
volume level.This option will become 
unavailable if Audio Out 
is set to On.Use  to increase right speaker volume, 
 to increase left speaker volume level.-12 to +12
Sound TypeSelect audio type (This 
option will only appear when 
AV1, AV1-RGB, AV2, AV2-S, 
AV3, AV3-S, AV4, AV4-S, PC, 
Component 1, Component 2 
or DVI is selected as the 
signal source).
This option will become 
unavailable if Audio Out 
is set to On.
Use the  and  buttons on the 
remote control or the Vo l u m e and 
Vo l u m e   buttons on the display to 
change selection.• Stereo
• Sound 1
• Sound 2
Sound TypeSelect TV audio (This option 
will only appear when TV is 
selected as the signal source).Use the  and  buttons on the 
remote control or the Vo l u m e and 
Vo l u m e  buttons on the display to 
change selection.Auto, Mono, 
Stereo, Sound 1, 
Sound 2, Sound 
3, NICAM
Steady 
SoundAutomatically adjusts the 
sound level to be constant 
amongst different TV sta-
tions when viewing TV pro-
grams.
This option will become 
unavailable if Audio Out 
is set to On.
Use the  and  buttons on the 
remote control or the Vo l u m e and 
Vo l u m e  buttons on the display to 
change selection.• Off
• Auto
SurroundSelect a surround sound 
effect.Use the  and  buttons on the 
remote control or the Vo l u m e and 
Vo l u m e  buttons on the display to 
change selection.• SRS TS
• DOLBY 
Surround
• Off
Audio OutSelect sound output from the 
internal speaker or external 
speaker.Use the  and  buttons on the 
remote control or the Vo l u m e and 
Vo l u m e  buttons on the display to 
change selection.• Off
• On
Advanced Audio Settings- Press OK to enter.
This option will become unavailable if the Audio Out option is set to On or the Surround option is 
set to DOLBY Surround or SRS TS.
Treble Adjust treble tonesUseto increase treble tone,  to 
decrease treble tone.-12 to +12
Mid 
Tr e b l eAdjust mid-treble tonesUseto increase mid treble tone,  to 
decrease mid treble tone.-12 to +12
Middle Adjust mid tonesUseto increase middle tone,  to 
decrease middle tone.-12 to +12
Mid Bass  Adjust mid-bass tonesUseto increase mid bass tone,  to 
decrease mid bass.-12 to +12
Bass Adjust bass tonesUse to increase bass tone, 
to decrease bass tone.-12 to +12
 
						

							On-Screen Display (OSD) Menu 21
English
Picture Menu
1. Press the MENU button on the remote control or 
the MENU button on the display to display the 
main menu.
2. Press the or  buttons to select Picture and 
then press OK to enter the submenu.
3. Press the  or  buttons to select an item.
4. In the Picture Menu, use the or buttons to
adjust the setting or select the options.
5. To return to the menu one level up, press the 
MENU  button on the remote control, or the 
MENU  button on the display.
ItemFunctionOperationRange
Contrast Adjust image contrast.Use  to increase con-
trast, or to reduce it.0 to 32
Brightness Adjust image black level. for brighter blacks,  
for darker blacks.0 to 60
Colour Adjust colour saturation. for higher saturation, 
for lower saturation.0 to 64
Tint Adjust colour tint. for redder tones,
  for greener tones.0 to 30
SharpnessAdjust the sharpness level 
of the image. for a sharper image,  
for softer image.-14 to 25
Advanced Picture Settings - Press OK to enter.
Colour 
TEMP.Adjust the color tint of the 
black and white part of the 
image.Use the  and  buttons 
on the remote control or 
the Vo l u m e and 
Vo l u m e   buttons on the 
display to change selec-
tion.• Panel Default: Backlight 
color
• Wa r m: Biased toward red
• Normal: Standard  video/
TV color temperature
• Cool: Biased toward blue - 
for PC input
Picture ModeTo restore a factory preset 
or user customized picture 
mode from memory.Use the  and  buttons 
on the remote control or 
the Vo l u m e and 
Vo l u m e   buttons on the 
display to change selec-
tion.• Vivid
• Standard
• Movie
• Sports
• Personal 1
• Personal 2
ACE (Auto 
Contrast 
Enhance-
ment)Adjust the auto contrast 
enhancement function 
that optimizes the density 
of dark and bright areas of 
images.Use the  and  buttons 
on the remote control or 
the Vo l u m e and 
Vo l u m e   buttons on the 
display to change selec-
tion.• Off
• High
• Middle
• Low
Noise Reduc-
tionAdjust the image noise 
reduction function that 
helps to remove noise in 
images.Use the  and  buttons 
on the remote control or 
the Vo l u m e and 
Vo l u m e   buttons on the 
display to change selec-
tion.• Auto
• High
• Middle
• Low
Color Enhancement - Press OK to enter.
This option will become unavailable if the ACE option is set to High, Middle or Low.
 
						

							On-Screen Display (OSD) Menu 22
English
Picture Mode Settings
1.  Press the MENU button on your remote control or the MENU button on the display to 
display the OSD menu.
2. Press the  or  button to select Picture and press the OK button to enter the submenu.
3. Select an option (Contrast, Brightness, Color, Tint...) from the Picture menu to adjust your 
favorite image quality.
4. Press the  or  button to select Advanced Picture Settings, and press the OK button to 
enter the submenu.
5. Press the  or  button to select Save Settings and press the OK button.
6. Press the  or  button to select To Personal 1 or To Personal 2 and then press the OK 
button to confirm.
Selecting a Picture Mode
1.  Press the MENU button on your remote control or the MENU button on the display to 
display the OSD menu.
2. Press the  or  button to select Picture and press the OK button to enter the submenu.
3. Press the  or  button to select Advanced Picture Settings, and press the OK button to 
enter the submenu.
4. Press the  or  button to select Picture Mode, and press the  or  button to select a 
picture mode you desire.
5. Press the MENU button to close the menu.
You can also press the  (Picture mode) button on the remote control to switch to the picture
mode you want directly.
Red Adjust red in image. for more red concen-
tration,  for less red 
concentration.0 to 30
Green Adjust green in image. for more green concen-
tration,  for less green 
concentration.0 to 30
Blue Adjust blue in image. for more blue concen-
tration,  for less blue 
concentration.0 to 30
Yellow Adjust yellow in image. for more yellow con-
centration,  for less yel-
low concentration.0 to 30
Save SettingsTwo different user profiles 
can be set.Press or buttons to 
select the user situation 
preset Personal 1 or Per-
sonal 2. Then press OK to 
save your current settings.• To Personal 1
• To Personal 2
 
						

							On-Screen Display (OSD) Menu 23
English
Feature Menu
1. Press the MENU button on the remote control or 
the MENU button on the display to display the 
main menu.
2. Press the or  buttons to select Feature and 
then press OK to enter the submenu.
3. Press the  or  buttons to select an item.
4. In the Feature Menu, use the or buttons to
adjust the setting or select the options.
5. To return to the menu one level up, press the 
MENU button on the remote control, or the 
MENU button on the display.
ItemFunctionOperationRange
PIP AudioSelect which audio 
source you want to hear.
This option is avail-
able only if the PIP 
mode is activated.
Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e  
buttons on the display to 
change selection.• Main
• Sub
PBP AudioSelect which audio 
source you want to hear.
This option is avail-
able only if the PBP 
mode is activated.
Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e  
buttons on the display to 
change selection.• Left
• Right
PIP & PBPDisplay video and 
images simultaneously 
in either Picture-In-Pic-
ture or Picture-By-Pic-
ture mode.Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e   
buttons on the display to 
change selection.• Full screen
• Graphics On Video
• Video On Graphics
• Graphics By Video
• Video By Graphics
FreezeFreeze motion of screen 
image (however, broad-
cast continues).Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e  
buttons on the display to 
change selection.• No
• Yes
BacklightAdjust backlight inten-
sity.Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e   
buttons on the display to 
change selection.• Dark
• Normal
• Bright
Sleep 
TimerSet the Sleep timer to 
automatically turn off 
the display.Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e   
buttons on the display to 
change selection. 0, 30, 60, 90, 120, 150, 180 
minutes
Advanced Feature- Press OK to enter.
 
						

							On-Screen Display (OSD) Menu 24
English
Aspect 
RatioAdjust image aspect 
ratio.Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e   
buttons on the display to 
change selection.• Full Screen - Enlarge the 
standard 4:3 video signal (e.g. 
TV signal) to 16:9 full screen 
video signal. When the 
original input video source is 
16:9 in ratio (e.g. DVD 
signal), no change will occur.
• 4:3 Format - Display the 
standard 4:3 video signal (e.g. 
TV signal) in the center of 
the screen at the ratio of 4:3. 
The screen does not change, 
but black blocks appears in 
the left and right sides of the 
screen. When the input video 
source is 16:9 in ratio, 
deformation will occur on 
the screen.
• Letterbox -Fill the entire 4:3 
screen with a 4:3 video signal. 
The redundant part on the 
upper and bottom of the 
image will be removed and 
the image will extend 
vertically and horizontally to 
fill the full screen. When the 
input video source is 16:9 in 
ratio (e.g. DVD signal), no 
change will occur.
• Anamorphic - Fill the entire 
screen with a 4:3 video signal. 
Some deformations may be 
identified on the edge of the 
image. When the input video 
source is 16:9 in ratio (e.g. 
DVD signal), no change will 
occur.
• Real - Display the actual size 
of the video source without 
zooming.
Auto 
FormatSet the display to auto-
matically adjust screen 
aspect ratio when the 
SCART input is used. Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e  
buttons on the display to 
change selection.• Yes
• No
Video 
InputSelect video signal input 
source for PIP/PBP 
function.Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e  
buttons on the display to 
change selection.TV, AV1, AV1 RGB, AV2, AV2-
S, AV3, AV3-S, AV4, AV4-S 
Graph-
ics 
InputSelect graphics signal 
input source for PIP/
PBP function.Use the  and  buttons on 
the remote control or the 
Vo l u m e and Vo l u m e  
buttons on the display to 
change selection.• PC
• Component 1
• Component 2
• DVI
Reset All 
SettingsRestore all settings to 
default values.Press the OK button on the 
remote control or the INPUT 
button on the display to reset.