BenQ Dv3750 Users Manual

Getting Started with Your Display 5
English
Main Unit (Rear View)
No.NameDescription
1 AUDIO OUT (L/R)Connect the audio input of an amplifier here.
2 AV2 (SCART connector)Allows you to connect to the SCART output terminal of your DVD 
player or other AV devices.
3 AV1 (SCART connector)Allows you to connect to the SCART output terminal of your DVD 
player or other AV devices.
4 TV/CATV AntennaConnect your antenna to this input.
5RS232This terminal is for service purpose only.
6 AV3 (RCA connector)• VIDEO...

Setting up Your Display 6
English
Setting up Your Display
Connecting the Antenna
The antenna equipment has far more effect on reception for color TVs than on black and white 
models. For best reception it is recommended that an outdoor antenna be used. Connect the 
lead from the outdoor antenna to the antenna input on the rear of the display.
Connecting Audio and Video Signal Sources
• Before connecting any component, please familiarise yourself with the location and type of 
each input.
• If incorrect...

Setting up Your Display 7
English
Connecting Composite (AV) Video Signal (RCA)
Connecting Composite (AV) Video Signal (SCART)
Connect the Composite (AV) output of your AV 
equipment to the Composite (AV3) signal 
terminal on the display using a Composite (AV) 
video cable (RCA connector) as illustrated.
Composite video input is the most 
commonly used signal input. However, this 
type of input also provides a less optimal 
image quality. Many video sources can only 
output Composite video signals, for...

Setting up Your Display 8
English
Connecting S-Video Signals
Connecting Component Video Signals
1. Connect the S-Video output of your AV 
equipment to the displays S-VIDEO terminal 
using an S-Video cable. Pay attention to the 
direction of the connector on the S-Video 
cable when inserting.
2. Connect the audio output of your AV 
equipment to the displays S-VIDEO AUDIO 
L/R input terminals using the AV cable or 
equivalent.
  An S-video signal provides a higher quality 
image to that of Composite video....

Setting up Your Display 9
English
Connecting RGB Signals (Mini D-SUB)
Connecting DVI Signals
1.  Connect the analog video output of your PC 
to the PC D-SUB  terminal on the display 
using a Mini D-SUB 15-pin cable.
2. Connect the audio output of your PC to the 
displays PC AUDIO input terminal using an 
appropriate cable.
1. If the signal resolution is greater than the 
default resolution, the screen may be 
unable to display image details clearly.
2. You will need a converter to connect a 
Macintosh...

Setting up Your Display 10
English
Connecting Audio Output Signals
Connecting the Power Cord
1. Connect the female end of the AC power cord to the AC input on the display.
2. As shown in the diagram, connect the male end to a wall power outlet.
•  The figure above shows the power cord connection. The shape of the physical power cord plug 
and socket will differ depending on the location where you purchased the display.
• This product must be operated only from the type of power source indicated on the...

Setting up Your Display 11
English
Initial Setup
1. Check to make sure that all connections to your display are correct and firm.
2. Press the Power button on the display. The display will turn on. The following First Turn On 
screen will appear.
3. Press the Vo l u m eor Vo l u m e buttons on the display to select a screen display language, 
and then press the Channel  button on the display to go to the next step.
4. Press the Vo l u m eor Vo l u m e buttons on the display to select your country,...

Remote Control 12
English
Remote Control
Below is the function description for each button on your remote control.
1. (Power) 
Press this button to power on the display. Press again to put 
the display to standby mode.
2. (Input)
Press this button to select your desired input source.
3. (Backlight)
Press this button to adjust screen backlight.
4. (Information)
Press this button to display the TV channel message and 
other signal messages (including video or computer signals).
5.  (Sleep timer/Teletext...

Remote Control 13
English
13. (Teletext)
Press this button to turn on the Teletext function. press this 
button again to turn it off.
14. PIP/PBP
Press this button to simultaneously view signals from two 
different sources on the screen.You may choose picture-in-
picture (PIP) mode or picture-by-picture (PBP) mode.
15. 
///and OK
• : Press the  or  buttons to select settings.
• : Press the  or  buttons to adjust OSD menu set-
tings.
• Press OK to execute selections, or to enter a submenu you...

Remote Control 14
English
Using the Remote Control
When using the remote control, aim it at the remote control sensor window on the display. If 
there is an object between the remote control and the signal remote control sensor window on 
the display, the remote may not operate.
When using the remote control, please note:
• Do not strike or drop the remote. Do not expose the remote control to liquids and do not place it
in humid environments.
• Do not install or place the remote control in direct...